Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 TP-LINK Malaysia Official Thread, Technical Enquiries and Support

views
     
GuyM
post Apr 8 2021, 11:26 AM

Regular
******
Senior Member
1,787 posts

Joined: Jul 2007
Lets assume this...

My modem on 1st floor living area, one M4 placed here then another M4 placed on ground floor living area which is approx 15m apart divided by the stairway with no partition in-between.

Would M4 on ground floor gets good connection with main m4 upper floor? Reason thinking of M4 cos got old devices ie laptop/spare phones which is not WPA3 compliant etc

Kindly adv, thankS!
GuyM
post Apr 8 2021, 03:32 PM

Regular
******
Senior Member
1,787 posts

Joined: Jul 2007
QUOTE(ray8426 @ Apr 8 2021, 12:20 PM)
Just to ask, before you use M4,
current wifi signal (M4 will placed location) weak or strong? hmm.gif
*
Both spot based on current gear ok
GuyM
post Apr 11 2021, 12:25 PM

Regular
******
Senior Member
1,787 posts

Joined: Jul 2007
QUOTE(alvpkl @ Apr 11 2021, 09:49 AM)
Hi @TP-Link, what is the correct procedure to connect Unifi tv box to AC1200?
I followed the following steps and still doesn't work:

Mode: Custom
IPTV VLAN ID: 600
LAN1: IPTV

Connect box to port 1.
The TV box cannot detect network connection. Cannot get NTP time.
I subscribed to the Unifi 100mbps package and it doesn't include unifi tv account. Is this the issue?
I will upgrade to 300mbps soon.
Please advise. TQ.
*
Your unifi TV account is it app based?if so try logging via wifi and make sure no vpn connected
GuyM
post Jun 28 2021, 10:56 AM

Regular
******
Senior Member
1,787 posts

Joined: Jul 2007
Use WiFi analyser to check and setup to avoid congestion with neighbours... My AX20 now reaches the front gate of the house
GuyM
post Jun 28 2021, 10:58 AM

Regular
******
Senior Member
1,787 posts

Joined: Jul 2007
QUOTE(chongkiatz @ Jun 28 2021, 08:49 AM)
Really thx guys for the recommended and i really love the tplink one mesh ax20 + re605x , now my whole house can get connection even dead zone can have all 2.4h connection while 5hz must be around downstair living room to get full 100mbps speed

Worth to spend the money and thx for remind to upgrade the firmware and change to 44 channel
*
Why re605x cos its costlier than ax20? Why not another ax20?

 

Change to:
| Lo-Fi Version
0.3444sec    0.80    7 queries    GZIP Disabled
Time is now: 17th December 2025 - 01:06 PM