Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 LYN Official Perodua Bezza Club V3

views
     
Ciypher
post Jul 24 2018, 01:23 PM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(ozakitime @ Jul 22 2018, 08:41 PM)
Hi, anyone changed the rim to 15' alza rim with 195/50/15 tire profile? just want to confirm that the tire wont hit the fender or suspension during full load. Sometimes I need to carry stocks up to 150kg..
*
195/50R15 with 7J ET35 will rub fenders, 6.5J ET35 will not. 195/55R15 with 6.5J ET35 will rub fenders slightly.
FYI, 195/50R15 tyre loading will be lower than 195/55R15 at the same tyre pressure.
Ciypher
post Jul 24 2018, 10:12 PM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(spreeeee @ Jul 24 2018, 02:33 PM)
original 14" rim is 6.5 or 7?
*
Original 14" is 5J.
Ciypher
post Jul 24 2018, 10:14 PM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(jtan.pdr @ Jul 24 2018, 07:14 PM)
Yeah.. Different experts have different opinion or thoughts.
Hard to know which is which.
Even the manufacturers are not very informative about this gearbox issue..

But to step on the brakes for a long time makes the LED brake lights heat up and fail sooner.
Then to repair, must change the whole rear cluster..
That's pricey too..
*
The brake lights are using normal bulbs except for the centre brake light using led.
Ciypher
post Jul 26 2018, 09:26 AM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(spreeeee @ Jul 23 2018, 11:42 PM)
The upper one doesn’t come with, and anything on top of factory installed tint will void the warranty. So what I did was I called up the Sahara, number got it from the warranty booklet, hoping to install upper tint from them so won’t void the warranty, but they said they don’t do anything extra, except warranty fix.

Mat, I’m using Trapo.
*
Any idea where Sahara X dealer located in JB? Asked P2 SA, they also don't know..
Ciypher
post Jul 28 2018, 09:21 PM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(Goodboy92 @ Jul 24 2018, 11:18 PM)
Sure? I think bezza rear light was all led except reverse and signal light

Led can last better and much cooler than normal bulb

Can see a lot myvi 10years d still the rear led light working

The highlight design of this car I would say was the rear light lols
*
Confirmed only reverse and signal light using normal bulb after confirmation with SA.
Ciypher
post Jul 28 2018, 09:22 PM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(jtan.pdr @ Jul 25 2018, 12:27 AM)
Led leh..
Good boy is right.
*
Yes confirmed brake lights are LED.. except for reverse and signal light
Ciypher
post Aug 7 2018, 04:00 PM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(afoka @ Aug 7 2018, 12:36 PM)
I hate bezza steering, so ditch it for new myvi steering.

plug and play said the shop...button works like a charm, but the phone not sure..never try it

bluettoth also ok

[attachmentid=9957971]
*
Nice.... How much for the steering wheel? Brand new or used?
Ciypher
post Aug 19 2018, 01:13 PM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


Planning to add Advance Steering Wheel Audio Control on my Premium X. Anybody kind enough to share what are the parts required?
Ciypher
post Aug 23 2018, 01:44 PM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(Goodboy92 @ Aug 21 2018, 07:29 PM)
Yes , when fuel level goes too low ( not really very low )
Can hear inside cabin , the right word would be consistent noticeable sound
*
I recalled there's one time I drove till fuel level really low, can't remember during corneribg left or right, there's a moment of fuel starvation(jerk with dip of rpm)...
Ciypher
post Sep 20 2018, 01:46 PM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


Anyone driving Premium X thinking of changing to Advance steering wheel? I'm changing mine soon. The steering audio control wiring will be an issue though if there is no wiring provision on the clock spring.
Ciypher
post Sep 21 2018, 10:22 AM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(Goodboy92 @ Sep 20 2018, 09:24 PM)
Not sure how it work , and abit expensive

You don't have touch screen no need that I think

https://www.lazada.com.my/products/perodua-...0&utm_campaign=[SSC-000000000000-00000-00000-0]:%20Smart%20Shopping%20Campaign&utm_term=[SSC-000000000000-00000-00000-0]:%20Smart%20Shopping%20Campaign_xxmo0000000at0000_t_pla-296303633664&adjust_tracker=t2v78t_5n20iw&adjust_campaign=1032211143&adjust_adgroup=54400014687_t_pla-296303633664&adjust_creative=296303633664_594497385_118114290&tracker_limit=1000000&ef_id=W6OfOwAABA5Q7fTQ:20180920132307:s
*
Changed my steering wheel to Advance model. Comes with audio control panel. Sadly the clock spring(Premium X) is missing the wire socket. So more parts/work required.

My touchscreen HU still no Steering control.
Ciypher
post Sep 22 2018, 06:10 AM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(arashikage @ Sep 21 2018, 11:53 PM)
When I turn on headlamp/highbeam there is a tick tick sound coming from the glove box/fuse/aircond blower area. Is that common? I only noticed it after a month of using my Bezza
*
Yes common, thats the relay sound.
Ciypher
post Sep 24 2018, 07:34 AM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(eugenecctan @ Sep 23 2018, 11:31 PM)
Guys, Can 2016 bezza use 2017 diffuser? Thanks
*
My Bezza is 2017 pre-Improvement model. If you are referring to the rear lower diffuser then yes you can get it done at SC. Cost around RM200++..

Mods done so far,
- Rear diffuser, RM200++
- Chrome aircon knob, RM28++ each.
- Gear console trim, RM40++
- Advance Steering, RM470++

Contemplating changing doors handle cover but now already have scratches so the silver painted ones don't know will suffer the same??.

This post has been edited by Ciypher: Sep 24 2018, 07:40 AM
Ciypher
post Sep 24 2018, 05:02 PM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(eugenecctan @ Sep 24 2018, 02:55 PM)
Thanks for the confirmation, but is that really a diffuser? It seems will drag the car even more from the design.
*
Not sure if its suppose to function as a diffuser(drag coefficient affected slightly) but more to address the "Tonggek" complaints.
Ciypher
post Sep 25 2018, 12:57 PM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(singk @ Sep 25 2018, 09:51 AM)
seriously, can we feel the difference in drag? the only thing to prove it is through lab test, or real life test on fuel consumption with different design. that piece is just a faux diffuser, it looks like diffuser but it never serve the function of a diffuser. an eye candy. indeed the new design looks better as it covers the spare tyre well, and i personally believe that it did disturbs the underbody airflow by a bit as it inches downwards blocking some airflow path.
if not mistaken, rule of thumb for windscreen insurance premium is 15% of insured value. you insured RM1000 value then you pay RM150 for the premium.
*
Read some article regarding this new diffuser affecting the drag coefficient very slightly. Should not affect everyday driving/fuel consumption.
Ciypher
post Sep 25 2018, 01:41 PM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


Really appreciate anybody can point me in the right direction where can I get Bezza Advance Spiral cable(clockspring) so I can continue with my conversion mod.
Ciypher
post Sep 25 2018, 02:30 PM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(Sh@rty 5 @ Sep 25 2018, 01:46 PM)
service centre  icon_rolleyes.gif
*
Done that. Apparently to convert from Premium X/Standard G spiral cable (clockspring) to Advance version require more than the spiral cable which I believe should not be the case. Maybe I will try going to other SC for second opinion.
Ciypher
post Oct 22 2018, 07:11 AM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(Chongwxi @ Oct 20 2018, 12:18 PM)
Anyone change tires to 195/50R15? Can share what tyre pressure you pump for it? Couldn't seem to find the sweet spot.  hmm.gif
*
33 PSI for my setup.
Ciypher
post Oct 22 2018, 09:43 PM

Getting Started
**
Junior Member
107 posts

Joined: Jun 2018


QUOTE(Chongwxi @ Oct 22 2018, 03:25 PM)
33psi (230kpa) all round or only for front tyre? May I know what tyre are you using?
*
33 PSI all round. 195/50R15. Kumho PS31.

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0880sec    0.73    7 queries    GZIP Disabled
Time is now: 18th December 2025 - 04:48 AM