Dear Friends,


I looking for awning contractor who provide good services and competitive price.
Location in KL.

Any recommendation ?

parking

I knew 1 who provide very good services and competitive price, pm me if u serious then I will share with you.

Three kim?

Pm me pls

3kim does awning too?

Think so, saw a few photo's of awning in their fb page before.

http://www.threekim.infotoday.com.my/

We are manufacturer for Wrought Iron & Mild Steel products likes : Grille,Gate,Fencing,Railing,Polycarbonate,Awning...

http://www.threekim.infotoday.com.my/

Beside grill.. and awning. Three Kim also provide folding gate can contact Ivy for quotation.. my awning and gate from three kim

Finally, after surveyed and get quotation for more than 6 contractors,
I deicided to use this contractor which recommended by forumer pm here.
He is the cheapest among my survey.

This friendly contractor name is Mr Koh, Company is Winner Steel from klang, 019-3264809
I got mr koh contact at 10am, text him at 11am, and he managed to come all the way from klang to cheras in 2 hrs.
heavy rainning somemore, so efficient and good attitube.

The most crucial points are good workmanship + Reasonable price + Superb service.

let pictures tell a thousand words














Material used : 3mm Solid Polycarbonate (Grey)
Size: 18 X 7 ft (132 sf)
Price: RM17 /psf
Timeline: 5 days
Steel Coat : Leather brown (FOC)
Installation : FOC
Pillar : No pillar design (look neat)
GST : N/A




Conclusion:
Very satisfied and two thumbs up !
Good workmanship + Reasonable price at today market.

Hope other forumers find this review useful

This post has been edited by Garmin_GPS: Mar 26 2017, 08:12 PM

How's the noise level when it rains? Worried that it might be way too noisy

parking for reference later

Nice, thanks for sharing.

I'm planning to do awning for my balcony area, almost the same sqft as you did. However, my budget is kinda low and I can't be putting pillars since I've already have corner lamps on each side at my balcony.

Any idea what might be cheaper options than Polycarbonate?

Metal deck, zinc type. Beware will be very loud during rain.

For poly it will not make noise, or can say very less noise, only those zink type will make noise during rain.

my one is without pillar too, cheaper option is those zink type.
i think only less than rm10 psf.
but drawback is not that nice in looking and will make noise during rain.

hi guys, has any of your polycarbonate awnings cracked before? Mine has cracked as a result of the sun, after a few years. So I'm not sure if I want to use polycarbonate anymore or the noisy zinc awnings. Any other choice of materials out there, besides glass?

Try this Contractor

Awning Installer Specialist - Polytech Marketing Sdn Bhd

They only Do Awning or Skylight

No Gate
No Grill

They offer 2 years Workmanship Warranty on top of 10 years Warranty for Their Imported Polycarbonate . ( Click Here)

Metal Structure is Minimum 2 inch x 4 Inch
Less that That , please don't Stand on it

Parking

parking

anyone have experiece buying from wira sky steel. they always participate in exhibtion

parking

mine cracked.
and recently dropped down.

There are newer and thicker polycarbonate now. Regardless they will still be noisy if it's raining or weather is hot. I opted for glass. Still the best imho

Due to the material, it'll cracked after few yrs, usually less than 5.

hi can i know who did your glass work for you? How much was it? I agree with you glass looks the best and doesnt block the precious light. I am looking for one now. Hope you can share

Please see my other thread "Cost of Renovation Items". My awning is currently under installation. Note that I chose translucent glass as it will block the sun and won't be so hot for my laundry machines which are outdoor in backyard

I requested for quotation to replace old metal deck awning with new (also metal deck type) for area size about 18 x 7 ft. The contractor quoted RM5,500 which I think is too expensive. Can anyone advise whether this price is reasonable?

parking too, looking to do awning my backyard

Hi, i'm steel trusses installer maybe i can help u.

Hi, i can help u. i'm steel trusses installer

My polycarbonate has been good for almost 8 years now.
So far, no leakage or crack yet.

If you don't mind, let me know what is the reasonable price for metal type awning for area size approx 18 x 7 ft including dismantling the old metal type awning. I have attached the metal type sample photo from Lazada.

This post has been edited by suyin922: Jul 17 2020, 09:10 AM


Attached thumbnail(s)

Need to the site condition estimate ard RM3K

Hi, thanks for your response. I am staying in Klang if you do serve this area. Before I invite you for site visit, may I know roughly how long it will take for such works? Recently there were few in my neighbourhood did the awning works, some contractors tend to do few hours a day then not coming the next day so taking long time to complete. My concern here is mainly because I need to find place to park my cars. If contractor takes a long time to do, I will have problem for parking.

This post has been edited by suyin922: Jul 17 2020, 11:43 AM

please try to get a quote from Yong Wang Iron, they delivered a quality works.

https://www.facebook.com/chungseong.ang

You may call Mr Ang or message him at 016-205 0402 / 016-668 8813

This post has been edited by maxguy: Jul 17 2020, 02:25 PM

Looking to build an awning 24 by 20 or 24 by 15 for car porch area. No pillar if possible.

Not familiar with the materials but looks like polycarbonate awning is the way to go. Mainly to park car under it and dry clothes under the sun.

This post has been edited by eddydo: Dec 2 2020, 07:25 PM

Yong Wang Iron Works & Trading
Please Contact : Mr Ang 016-2050 402 Mr Lim 016-6688 813

any recommended contractor around klang valley? just a basic awning to protect the car shld be fine. wonder how much is the price of zinc one nowadays

i'm looking Aluminium Composite Panel Awning for my house too.. any recommendation? and approx cost per ft2?

😀

This post has been edited by katijar: May 10 2022, 07:17 PM

do we need approval from local municipal for awning ? i heard that we need right ?

If you don't create any problem for the neighbour, no one will bother - I guess.

But, if your neighbour complains, you have to be careful. Famous case at Subang Jaya

https://forum.lowyat.net/topic/5076377

hi guys.

For awnings glass which is better?

Frosted vs Clear