Fax machine on Unifi, Wiring from dining room to bedroom
|
|
 Nov 11 2017, 10:06 PM
Return to original view | Post
#1
|
 
Senior Member
6,733 posts Joined: Jan 2003 From: Zion  
|
QUOTE(Harun786 @ Nov 11 2017, 02:18 PM) SOLVED !!!! I have problem when using fax on unifi phone line. But now its solved when i adjust the speed setting on fax machine from medium to low. Just for your info High = 56k Medium=28k Low=14k If you have problem sending fax at higher speeds, it is usually the fax machine on the other end cannot connect at faster speeds. |
|
|
Nov 13 2017, 06:53 PM
Return to original view | Post
#2
|
|
Senior Member
6,733 posts Joined: Jan 2003 From: Zion
|
QUOTE(badai @ Nov 13 2017, 05:42 PM) you missing the point. your machine and the other machine can't match the speed. and the speed has nothing to do with VOIP. it's your machine that are so old and outdated that it has speed setting while all current fax machine can auto negotiate during handshake to sync all their parameters. Almost all fax machines including all in one can adjust baud rate transfer from 9600 up to 56K. Usually adjust the slowest can correct compatibility and communication problems. You are right if the fax machine is too old, it may not be able to communicate. But usually newer ones can auto sense lower speeds and accept the fax signal. Only the newer 56K one has problem transmitting to lower speed ones. Well not really an issue not since TS already solved his problem. This post has been edited by netmatrix: Nov 13 2017, 06:54 PM |
| Change to: |  0.0226sec
 0.83
 7 queries
 GZIP Disabled
Time is now: 15th December 2025 - 11:45 AM |
Quote