LYN Bezza Club Rules Following rules are being implemented to prevent any unhappiness arise during discussion. Rule 1: Don't get us banned again haha respect each other, don't come in here to shoot Bezza owners, or other cars. If you have Moolah, please go far2 and buy your other car. Rule 2: This is not a trading thread. Any trading activities can be shared etc., but don't until too much ok? Rule 3: enjoy, share your problem and improvement for our Bezza, and treat others like how you treat your Bezza. We are all learning together here.
» Click to show Spoiler - click again to hide... «
ApikKirito91's Review
» Click to show Spoiler - click again to hide... «
Known Issues / Solution
» Click to show Spoiler - click again to hide... «
1.tik tik sound coming from around the compartment at driver side pending answer
2.Lots of noise coming from the back normal because bezza doesn't have good noise insulation
3.From P to R is very hard to engage this actually happens to me.. but I found out why.. (for me at least) it only becomes hard to change from P to R when your P brakes engage (meaning, after put into P the car still moves slightly). So what I do is prevent my P brakes from engaging... when parking : keep foot on brake, push gear into P (don't take foot off brakes), pull handbrake till really maximum. This way, the handbrake stops the car moving hence no need for P brake to engage, hence not hard to change gear later
4.My steering wheel feels like it's mis-aligned a little bit to the right A few members have this issue, some went back to Perodua to adjust, but alignment can be done outside as well. Ranges from RM25 (normal machine, about 15-30min) to RM200 (for those sifu, manually adjust, min. 4hours)
5.faulty brake lights do check your brake lights from time to time
» Click to show Spoiler - click again to hide... «
Useful Information
» Click to show Spoiler - click again to hide... «
1. Lock Nut Size to Protect your rims M12 X 1.5mm - Brand you can buy - TPI, McGard, Rays (Careful, a lot of fakes)
2.Service Recommendation - Don't Pay for things you do not need! [attachmentid=8458910]
3. Upgrading Rims? Please remember details below: PCD - 4X100mm (Can refer to HERE, just look for Axia cos Bezza too new) Recommended not to go above 55 thickness, as it will scrape against your fender, unless u roll it. Use Stopper or Adjustables Absorbers if you need. Review Upgrade Rim from kenyap9205
» Click to show Spoiler - click again to hide... «
4. Soundproofing - Add rubber lining (courtesy DIY info from eugenecctan)
» Click to show Spoiler - click again to hide... «
- Add sound dampening layers to doors, firewall, boot, arches (such as paid product from Sh@rty 5)
» Click to show Spoiler - click again to hide... «
[attachmentid=8458972][attachmentid=8458973]
Agent Review and Recommendation
» Click to show Spoiler - click again to hide... «
Recommended To Buy From 1.Sri Petaling, Selangor - Daniel (+60 16-323 6465) Just Mention Yang Blue Bezza - Recommended by y4ng - Loan super fast, trade in fair price, and there's additional discount
Recommended To AVOID 2.G.A. Trading Sdn Bhd 301262K - not recommended by grinnfrownin
» Click to show Spoiler - click again to hide... «
[quote=grinnfrownin,Mar 2 2017, 09:11 PM]So far worst experience with Perodua Dealer at Bangi. Had a friend signed loan 8/2 and until today did not received car. After signing, con agent promised week after but on that day say cannot deliver, ask for more time. Waited 2 more week until 28/2 (bad idea, should've cancel loan) and friend took leave. The day before con agent offer to deliver car to house! But on 28, an hour before meeting time he say cannot deliver. Stellar con.
So on 1/3 we had to do his job and call up his manager and threaten to cancel loan. Same day friend name registered to car in JPJ system and tomorrow promised to deliver. Apparently the cause is gear up body kit not ready for installation but agent never offer to receive car first then install later. The car could've been delivered 3 weeks ago. The problem is whole time is the con agent give various excuses such as wrong order, no rolling fund, custom not approved, etc etc. All lies, the manager gave the real reason(supposedly? 3 weeks is still 3 w). G.A. Trading Sdn Bhd 301262K Jalan 4/12, Seksyen 4, 43650 Bandar Baru Bangi Agent:AmXXXXXX 01422574XX /rant Sorry. Mistake was not cancel loan earlier.
[/quote]
Hi for the standard g auto.. is there any push start button?
Mar 20 2017, 10:52 PM
respect each other, don't come in here to shoot Bezza owners, or other cars. If you have Moolah, please go far2 and buy your other car.
0.0349sec
0.51
7 queries
GZIP Disabled
Quote