Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Tutorial on Ubiquiti Edgerouter for unifi/maxis, Edgerouter settings ftw

views
     
kutitata
post Dec 26 2016, 04:38 PM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
Awesome thanks for writing this!

If I have 9 ethernet connections in total (3 desktop, 2 android boxes, 1 cctv dvr) and 3 of them need POE (to drive UAP AC LR) what would be the best hardware from ubiquiti to use? plan on getting a router and switch.

this is for home use only running on unifi
kutitata
post Dec 28 2016, 05:54 PM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
you have been so patient to answer my questions I am grateful to you

maybe you could also explain how to setup for cctv dvrs is it port forwarding?

does android boxes need any specific set up requirements?

how about the UAP AC LR?


kutitata
post Dec 28 2016, 09:07 PM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
QUOTE(eastherd @ Dec 28 2016, 06:20 PM)
Just bought and setup ER-X. Work perfectly. (even though without TV yet, i can see the traffic coming in from the EdgeOS GUI).

Thanks!

I just bought 1X ER-X and 2XUAP-AC-LITE. Will get some old cisco POE switch soon.
*
Where did you buy the er-x and uap ac lite from, where will you buy the Cisco poe from?
kutitata
post Dec 28 2016, 09:09 PM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
QUOTE(wanttotree @ Dec 28 2016, 07:04 PM)
Awesome. Thats cool. Please do the hypptv sooner or later and share yr experience here. =) U guys can post your photos of the setup jere too. It would be nice to see how u guys set it.
*
The setup would be another thing to have a tutorial on...

Hahahah...

I was just trying to imagine placing the switch and er-x and fiber modem on the wall to see how the cable connections will work....
kutitata
post Dec 28 2016, 09:17 PM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
QUOTE(wanttotree @ Dec 28 2016, 07:00 PM)
You are welcome sir, just an enthusiast helping another. Port forwarding is pretty straight forward(no pun intended). Its exactly how u setup with any decent router. U can easily find it in the router page. As for android android box, i have not seen any need for special configurations. U can always enable upnp or upnp2 if u want auto port assign on everyrhing else. Uap ac lr, all u need to do is enable poe 24v on es-8. Ur gonna use 3 uap lrs? Wow, yr house must be a mansion. =) Btw, may i know your speed subscription bro?
*
My house is actually quite small but I wanted the best coverage even in the kitchen and all that plus through the walls and rebar I am afraid the signal will be poor.

This set up will be at a new house currently under renovation so I am not sure what unifi speed I will use either the 30 or 50 plan.
kutitata
post Dec 29 2016, 07:54 AM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
I am curious, why is the Edge Router X cheaper than the Edge Router Lite although the ER-X has more ports?

Okey I did some googling and found this :-

https://help.ubnt.com/hc/en-us/articles/219...r-Should-I-Use-

The main difference between ER-X and ER Lite is the pps...

1 mil vs 130k does it make a difference?

This post has been edited by kutitata: Dec 29 2016, 08:11 AM
kutitata
post Dec 29 2016, 10:27 AM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
QUOTE(wanttotree @ Dec 29 2016, 08:17 AM)
Edgerouter-x has a mediatek processor running at 880mhz single core. Paired with a switch chip. This router is capable of offloading a nated internet up to 800mbit/second.
In the other hand, edgerouter lite has a cavium processor running at 500mhz dual core. All of the ports are connected to the cpu directly, because it lacks a switch chip. So if u have an internet that can provide 2gbit/second, u can actually pull 920mbit/second per port from the other 2 lan. Usually people use this router because they have their own robust l2/l3 switch to pair it with. I hope my expalanation is clear. Cheers
*
Okey, so for an unifi application could the ER Lite difference be noticable? I am no expert in networking or IT.

I am now mulling using both connect both the

Fiber Modem

--ER Lite

---ER X

----Desktop

----Desktop

----US-8-150

-----(balance connections)

Does this configuration makes sense? Or no difference?

Or should I connect the US-8-150 to the ER Lite directly?

blink.gif

This post has been edited by kutitata: Dec 29 2016, 10:29 AM
kutitata
post Dec 29 2016, 02:56 PM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
QUOTE(wanttotree @ Dec 29 2016, 02:21 PM)
Its not a very good idea to put edgerouter-x in between edgerouter-lite and us-8. May i know why u r trying to set up two routers together? Maybe i can figure something out.
About edgerouter lite being noticable compared to edgerouter-x. Most probably not. As long as u are not breaking the 920-940mbps, it wont make any difference in performance. But in case of pairing it with a couple of switch, it will improve yr lan eg: file transfer or local file streaming. So the choice is yours, in many household application. U wont go wrong with either.
Look at it this way.

If u have more ethernet devices eg: desktop,nas,laptop,tv,streaming box,cctv,a bunch of aps. = Er-l + switch/switches

But if u have something like this eg: smartphones, 1-2 APs, laptop connected to wifi, ipad, wireless tv. = Er-x
Im sure by now u can get the idea.
*
I am trying to connect all 9 connections. Actually 2 them won't be used often (maybe not used at all).

Ethernet devices : 1 mac desktop, 1 hypp tv, 1 cctv dvr, 1 android box, 3 APs...

So I have decided to go for ER-L + US-8, that way I can connect to 8 devices (7 in us-8, 1 in er-lite, and in future add a dumb switch to add more connections). I will leave one out for now.

What would be your ideal set up for 6 connections and 3 APs?




kutitata
post Dec 30 2016, 01:13 PM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
QUOTE(wanttotree @ Dec 30 2016, 12:58 AM)
I think maybe get an er-poe and a dumb 8 port switch. Get a decent ones.
*
Thank you so much! This is my favorite thread on lowyat!

What would be a decent Dumb Switch? Looking at Ubiquiti looks like they don't have






kutitata
post Dec 31 2016, 10:31 AM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
How is the interface for ER-POE to control the UAP AC LR?

Because the US-8-150 is perfect for that right? how about the ER-POE?

Briging this article to attention as well:-

https://community.ubnt.com/t5/EdgeMAX/ERPoE...RO/td-p/1507325

This post has been edited by kutitata: Dec 31 2016, 10:35 AM
kutitata
post Jan 1 2017, 12:43 PM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
So after reading and trying to understand...

For 9 connections (3 of needing POE)

option A
ERPOE5 & Linksys LGS108

option B
ERL & US-8-150 (1 WAN and 2 LAN on ERL)

option C
ERL connects to US-8-150 which connects to Linksys LGS 108

kutitata
post Jan 1 2017, 06:16 PM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
QUOTE(wanttotree @ Jan 1 2017, 06:00 PM)
Option A is perfect
Option B only gives 8 usable ports
Option C is a no brainer.
=)
*
Thanks again for answering my question...

One last thing...

when I do set up all the LANs, how will it go?

the three APs connected to the ER-POE will be on separate LANs?

How will that affect the network..?


Some people set up one LAN for wired and a WLAN for the wireless...

Then it would be ERL, TS-5-POE and Linksys LGS108


kutitata
post Jan 3 2017, 10:22 AM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
QUOTE(wanttotree @ Jan 1 2017, 11:08 PM)
u can set it up either way. a lot of people do that because they want to segment their activity. some even do it for fun. setup different subnet for different places in the house. saperate their cctv is common. i think you should segment subnet separating only cctv vs all other online devices. unless u have voip, u can add another subnet with different vlan.
wired and wireless is not necessarily needed to be separated. what if u want to cast your youtube from yr phone to your tv via chromecast or miracast. yr phone and your tv wont be able to see each other if u want to cast. maybe you want to stream something from your nas to your laptop. that also prevent it to communicate to each other.

erl+ts5poe+lgs108 is not bad. it makes it possible for u to setup hypptv together.

your setup maybe look like this for erl
eth0 = wan
eth1= lan 1
eth2= hypptv

lan 1 can daisy chain both ts5poe and lgs108 with no issue.
ts5poe can accommodate 3 aps and one more lan available to use
lgs108 is clearly open for everything else. =)
*
Thank you so much smile.gif

I would like to view the CCTV stream on mobile devices whilst at home, would that mean that it should be on the same subnet?

ERL

-Hypptv

-LGS108

--(all 6 connections)

--TS5POE

---(3 UAP AC LR)

---(Spare)

What about QoS? Does it help in a home set up? Like for instance to prioritize the android boxes to ensure good streaming?



kutitata
post Jan 3 2017, 12:47 PM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
QUOTE(welwitchia @ Jan 3 2017, 10:53 AM)
Hi Where does one buy this brand in KL?
Many thanks!
*
a few resellers listed here:-

https://www.ubnt.com/distributors/#asia
kutitata
post Jan 3 2017, 06:45 PM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
QUOTE(wanttotree @ Jan 3 2017, 01:35 PM)
Its all based on your own activity and how much people are using it simultiniously. If u have 30mbps and at least 2 ppl are streaming 4k videos at the same time, may a person is gaming online too. Maybe qos is a good idea. But other than that, the router on its own is performing rly well. Eg: 5 ppl max in my house at one time, i stream netflix 4k, another person stream youtube 4k, while another stream netflix on her phone. And the rest use normal youtube and web surfing normally. Never once my 50mbps is having a hiccup. Everything loads without buffer, n never slow down. Then again, this example is for a 50mbps. 30mbps and lower will vary. Non 4k streamer are always happy with 20-30mbps in my experience. Cheers
*
Wow, are you using the erl?

Mind explaining a bit on your hardware and set up?
kutitata
post Jan 5 2017, 07:40 AM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
QUOTE(wanttotree @ Jan 4 2017, 10:54 PM)
Yeap i am on erl. Using a 8port smart switch to handle my vlan and lan. One uap ac lite. All can acommodate 10+ wired and wireless.
*
Okey, so now I am sold!
kutitata
post Jan 5 2017, 07:47 AM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
What about

ER-SFP & LGS108...

why ER-SFP and ER-POE5 so much difference in price?
kutitata
post Jan 6 2017, 01:08 PM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
then you have convinced me to go the ERPOE5 + LGS108 route

can we set the hypptv to the LGS108 ?

This post has been edited by kutitata: Jan 6 2017, 01:09 PM
kutitata
post Jan 8 2017, 03:33 PM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
QUOTE(wanttotree @ Jan 7 2017, 04:32 PM)
I was thinkin u were to get erl+ts5poe+lgs108. I hope u understood. U did mentioned a few options, but its your decision 100% to buy which one.
*
Yea, I agree I am being going through so many options...

I mean to be honest they all cost almost the same...

Would a ERL+TS5POE+LGS108 be better than a ERPOE5+LGS108? I know you explain me it to me so many times...

blink.gif

Another question, how do we set up the UAP AC LR that the clients will keep re-connecting to the AP that is closest to them?
kutitata
post Feb 7 2017, 02:29 PM

Casual
***
Junior Member
322 posts

Joined: Dec 2007
looking forward to your next tutorial wanttotree

2 Pages  1 2 >Top
 

Change to:
| Lo-Fi Version
0.0329sec    0.37    7 queries    GZIP Disabled
Time is now: 30th November 2025 - 01:46 PM