My Nanye cutter doesnt rust yet but my Mr Diy cutter rust about a day after use it. I use WD41 on the cutter and the rust goes away.


That is not my pic, I dont own GodHand cutter. Too overpriced. Your cutter is GodHand? I have seen people complained about their Godhand broke tip.

There are proper ways to use it. No matter GodHand or other brand. All will prone to break if you dont use it properly.






This post has been edited by nazrul90: Mar 28 2017, 07:56 PM

Yes, its working. Just make sure it is Matte/Flat finish top coat before use.

Yes, material used is different. I bought Bandai starter kit set. The cutter is similar to above. The steel is easy to rust, cant fix it back plus the rubber holder rot in few year. That will be last time I use that same design cutter again.

Dont worry about how much it can cut as you still need sanding to clean off nub anyway. But hobby cutter narrow and small tip it can easily reach the small part to cut compared to normal tip cutter.

This post has been edited by nazrul90: Mar 29 2017, 04:13 PM

lol missing one of backpack thruster

Respect the modeler for this diorama build

Facepalm, p-bandai and reusing ancient joints.
http://p-bandai.jp/item/item-1000114005/

no
old MG released before year 2005 no hand peg to hold weapon

get MG Wing Zero Proto instead

err Wing Zero Proto was designed by Katoki, the so called Ver Ka line based from

This post has been edited by nazrul90: Apr 15 2017, 12:51 PM

Coming soon. And oh, no 1/100 FM, HGIBO and HGBF

This post has been edited by nazrul90: Apr 18 2017, 03:19 PM

was planned to buy this few months back but no stocks
and I found this review feel better now

best part is at 14:09

How is this nice for just for display purpose when standing pose need to mount a display base because to support heavy weight thruster backpack?

I have bad experience with RG Zaku II and that is annoyed me so much. But Sinanju is far worse than that. Partly on their fault using MK-II frame for Sinanju. Cant take the burden on bigger and heavy exterior plastic.

And FYI I treat my gunpla nicely
Take them out for display shelf sometimes, put in on table, admire it. I cant do that with flimsy RG Sinanju. And oh RG MK-II is solid piece even though his inner frame is weak on Sinanju.

This post has been edited by nazrul90: Apr 21 2017, 03:30 AM

Translated info.

Raiden-Go is damn nice. Feel like Bumblebee.
Shame that it is a Premium release.

This is beautiful. Love the color.

Still will ended up with puke gold inner frame. Why bother? The way they handle PG is very sad.

Not excited with this news but this mean we will get various RGs and possible P-Bandai.
FAUnicorn, Banshee, Banshee Norn, Phenex, Phenex G-Reco version, Unicorn GFT style statue and much more exclusive collab such as 7-11 and ANA

And you thought Granpa is milked enough already.


This post has been edited by nazrul90: May 3 2017, 07:25 PM

Lucky didnt buy Bandai ver yet
This one is way cheaper. Not into Batteroid & Gerwalk mode

It is made by Hasegawa so the details are nice but it is not snap-fit and need to paint like typical 1/72 planes made by them.
Most people build this kits said usually Hasegawa have more small part counts than Bandai.

No 00 related gunpla. Thats sad considering Seed got something on their 10th anniversary but not 00's 10th anni.

If you remember, MG Sinanju Stein ver Ka released on February 2013 MG Hi Nu ver Ka on August 2014 and MG FA Gundam Thunderbolt ver Ka on July 2016. No tradition that ver Ka must release on December.

Gotta agree this year MG release is too damn low.
Exclude P-Bandai, we only got MG GM Sniper II, Providence, Justice and ZZ ver Ka this year. Thats only 4.

4 MGs per year?

This post has been edited by nazrul90: May 11 2017, 04:56 PM

But they made MG V2 Gundam ver Ka on December 2015. That is small kit and plain unlike his variation V2 Assault Buster. No signature whether the kit is bigger or cooler, if they feel like to release it.

This August.

This post has been edited by nazrul90: May 11 2017, 07:18 PM