This much.
MG Exia, 00 and Qan T.
All of them having weak ankle. Which is can make your gunpla fall by just standing straight.
Put on action base also no use. It will make the joint sag over time.



This post has been edited by nazrul90: Jul 21 2017, 08:03 PM

A better look for inner frame. Also Unicorn has a better closed fist hand compared to previous RGs.

I find Reversible is better design than Reborns.

Any different than existing MG?

Any different than existing MG?

http://schizophonic9.com/re4/rg_unicorn.html



Most of the transformation resemble the MG and PG version but with exception for the face change.

The Unicorn face and Gundam face on same one solid piece. You only need to flip 180 degree to change the face. The arm locking mechanism is pretty well done.

Also this made bigger than usual, maybe to make it more stable and less fragile.

This post has been edited by nazrul90: Aug 5 2017, 03:31 AM

https://www.facebook.com/100006410808684/vi...19907811566226/

This post has been edited by nazrul90: Aug 8 2017, 07:49 PM

You mean like this?
They screw 4 RG release because of their decision.

Wow Cherudim Saga GBF type

But the HG Cherudim is shit. Hmm...

Not bad.
I dont believe 3D render pic one but this is the one on display. More likely the color we will get by straight build



This post has been edited by nazrul90: Aug 20 2017, 07:00 AM

MG Advanced GNX review
http://hobbynotoriko.yumenogotoshi.com/mg-gn-x-ad.html

Ball joint made from what? If polycaps ball joint you cant fix it except use something like paper.

If ball joint made from PS and ABS plastic, then you need to add more layer on it. Paint the joint part to fix loose problem sometimes work but I suggest to use putty as layer on ball joint. Sand it if too thick.

Do not use hobby cement, it is not add layer on plastic but instead melting it. I use putty on ball neck joint for my HG Unicorn before. It works better than layer of paint.

This post has been edited by nazrul90: Aug 24 2017, 01:21 AM

Different situation. Seam line removal is bond the plastic together by melting it.
Doesnt work well for tightening joint which we try to add another extra layer on it.

Heck the normal super glue work best than hobby cement.

Use hobby knife to trim it first and then sand the part gently.

Did it myself. It is become not so hard layer and probably will use more cement than needed to get the thick layer.

Also the extra thin type cement cant use to fix loose joint at all. It will evaporate like water when it dries.

This post has been edited by nazrul90: Aug 24 2017, 06:49 PM

Eh nope, I'm using the Mr.Cement Limonene type. It is extra thin solvent with lemon fragrant. The solvent does not bond with ABS plastic like my all purpose Mr.Cement Deluxe. Plus the cement is thin like water than thickness like glue. Not all hobby cement have same feature, there is a special cement for metal part, ABS plastic and such..



Multi purpose hobby cement works if you apply really thick layer but got risk as @advocado said .
Safe route is either use super glue or buy hardware top coat spray Anchor, Mr.DIY etc to apply the thick layer.

I like use putty method though because paint layer or super glue only working for a while before goes loose again.
Putty is harden like original plastic which is the best way to fix loose ball joint.

This post has been edited by nazrul90: Aug 25 2017, 10:44 PM

The future of gunpla.
35% of lineup become regular release, 65% become P-Bandai

This post has been edited by nazrul90: Aug 26 2017, 06:59 PM

Fenice variant is a hot cake. I finding hard time to find the HG normal Wing Fenice at hobby store.
While Rinascita is popular enough to get a MG.

https://www.gundamkitscollection.com/2017/0...per-custom.html

wait nobody post this yet? many said this MG is not a P-Bandai

woohooo RG Johnny Ridden's Zaku!!
http://www.gundamkitscollection.com/2017/0...-2-zaku-ii.html

This post has been edited by nazrul90: Aug 27 2017, 06:38 AM

Definitely MG Acguy. It is made flawless and the building process is so fun. If you like Zgok get the RG ver instead. The MG is kinda bad.