The Official iPhone 7/7+ Thread | V5, This is 7
|
|
 Nov 22 2016, 02:24 PM
Return to original view | Post
#1
|
 
Senior Member
3,854 posts Joined: Mar 2006 
|
Still find my photo to have some amount of noise. Even in decent lighting conditions. Am i expecting too much from my phone?
|
Quote|
|
|
|
|
Nov 22 2016, 09:04 PM
Return to original view | Post
#2
|
|
Senior Member
3,854 posts Joined: Mar 2006
|
QUOTE(maxilife1 @ Nov 22 2016, 07:17 PM) oh yeah.. Using the exact same casing. Black color though. And dirt cheap i think not original. Very bulky but i feel necessary whike i get useed to the size coming from 4s. After im used to it plan to fit the liquid armor on. I still have my layer of original apple plastic on the back to prevent the imprintssold my iPhone 6 plus 64gb and got my iPhone 7 plus 32gb gold  straight away apply tempered glass at the front, matte protector at the back, with otterbox casing which is kind of bulky.. need to find a slimmer protective case.. i like spigen but theres not many good design to choose from..mostly black or dark color [attachmentid=8108079]  |
|
|
Nov 23 2016, 09:52 PM
Return to original view | Post
#3
|
|
Senior Member
3,854 posts Joined: Mar 2006
|
Was wondering what is your charging habits to ensure long battery life. Used to hear we have to drain the battery before recharging.
But read llenty of articles saying you dont need to do so with lith ion batteries. Optimum should keep charge around 50-80% throughout the day. And go through a full charge cycle once a month. Currently doing this so wondering if it will do any good. Or bad.  |
|
|
Nov 24 2016, 08:14 AM
Return to original view | Post
#4
|
|
Senior Member
3,854 posts Joined: Mar 2006
|
QUOTE(Stitchie @ Nov 23 2016, 11:56 PM) Loving the liquid armor case from spigen, the finish is just fantastic, provide good grip at the same time feels smooth ( matte black is crazy slippery, my friend dropped my 1 day old i7 into the soup while trying to take pic T.T)  Taken with my note 5 The front I'm using nilkin tempered glass, very smooth too, liking the oleopbobic coating...but unfortunately was not being careful while trying to clean the dust bent the glass upward, now it has a ugly halo effect on the top left corner   QUOTE(jerryhean @ Nov 24 2016, 12:58 AM) Same color same combination. QUOTE(attw @ Nov 24 2016, 07:20 AM) Yup, same - another one with the same casing here Exact same combination for me only that my phone is jetblack. I just received my liquid armor yesterday but planning to use my otterbox at least for another 1 week while i get use to the plus size. Dont want to risk dipping into soup or worse....... Looks lovely though the combination, cant wait to ditch this bulky otterbix.  |
|
|
Nov 24 2016, 09:09 AM
Return to original view | Post
#5
|
|
Senior Member
3,854 posts Joined: Mar 2006
|
Btw do you guys mind sharing ur depth effect photos in good indoor lightings? I still feel the amount of noise is so bad that i wonder if my lens are faulty
This photo is the non depth effect one. Only slightly cropped » Click to show Spoiler - click again to hide... « This post has been edited by aztechx: Nov 24 2016, 09:09 AM |
|
|
Nov 24 2016, 01:51 PM
Return to original view | Post
#6
|
|
Senior Member
3,854 posts Joined: Mar 2006
|
QUOTE(xisan @ Nov 24 2016, 01:18 PM) I'm getting this for my 7+. Said shipping in this month in Indiegogo with 50 hours left. Interested in this too especially the floating glass part. How much is it?indiegogo link |
|
|
|
|
|
Nov 25 2016, 08:04 AM
Return to original view | Post
#7
|
|
Senior Member
3,854 posts Joined: Mar 2006
|
QUOTE(vez @ Nov 24 2016, 11:52 PM) unless you want everyday open and clean dust, not a good case They did mention this in a reviewsure trap dust day by day... then wont looks nice There is only a 0.1mm gap between the glass and the back of the iPhone, but the glass never touches the iPhone. Only 13% of the iPhone is touched by the case. To keep dust from getting under the case at the camera cutout there is a small rubber gasket that is lightly glued to stick to the case — and which makes a seal where the iPhone camera and flash is located Contemplating to buy or not This post has been edited by aztechx: Nov 25 2016, 09:20 AM |
|
|
Nov 25 2016, 01:50 PM
Return to original view | Post
#8
|
|
Senior Member
3,854 posts Joined: Mar 2006
|
QUOTE(jerryhean @ Nov 25 2016, 10:37 AM) Add USD10 for delivery to MY. Im a bit confused how this indiegogo works. So many different prices and do they really ship to Malaysia?? |
|
|
Nov 27 2016, 01:14 PM
Return to original view | Post
#9
|
|
Senior Member
3,854 posts Joined: Mar 2006
|
QUOTE(Andrewtst @ Nov 27 2016, 03:45 AM) iPhone 7 Plus Main Wide-angle lens v/s Telephoto lens. I too have the same complain. The noise is unacceptable for me to the point i thought my device was faulty.The Telephoto lens in low light is very bad! (actually not really low light but only night time indoor room normal condition) The noise is OMG! I believe that the reason why Apple auto switch to main lens for 2x zoom in low light condition! Main Wide-angle lens  Telephoto lens (taken from keep original photo when using Portrait Mode). Apple boot up too much highest ISO which is 1000 and destroy the output badly.  Actually the Telephoto lens quality not bad one. Below is taken using ProCamera using manual mode adjust to ISO 200.  Which pro camera app you are using?the usd4.99 one? Can it use the portrait mode? |
|
|
Nov 28 2016, 10:10 AM
Return to original view | Post
#10
|
|
Senior Member
3,854 posts Joined: Mar 2006
|
Concerned on the quality of my 7+ camera, I found there's a dedicated thread with plenty other people facing this issue.
Horrible noise and watercolor effect even in good lighting conditions Apple support link Now I do hope apple acknowledges this problem and rprovide a fix |
|
|
Nov 30 2016, 12:12 PM
Return to original view | Post
#11
|
|
Senior Member
3,854 posts Joined: Mar 2006
|
QUOTE(endless88 @ Nov 30 2016, 09:14 AM) Hi guys, just wondering did anyone feel that the haptic feedback at the home button is a bit weaker after some time? Mine is abt 1 mth old. Same case for me here. Thought it was my issue |
|
|
Nov 30 2016, 08:34 PM
Return to original view | Post
#12
|
|
Senior Member
3,854 posts Joined: Mar 2006
|
QUOTE(Ch3n_low @ Nov 30 2016, 08:11 PM) Or you get used to it already? Haha no way for me to confirm. When i hold the sides of the phone while the taptic engine works, the vibration is ok. Only my thumb no longer feels the 'force' . So your theory makes sense too. |
|
|
Dec 3 2016, 08:34 PM
Return to original view | Post
#13
|
|
Senior Member
3,854 posts Joined: Mar 2006
|
QUOTE(apowerfulskill @ Dec 3 2016, 05:31 PM) So so far you guys who have gotten the Jet Black model has it been good so far? As in, doesn't end up all scratched up too much? Safely enclosed in my otterbox casing with the original plastic wrap from the box. Was worried oabout overheating but so far so good even when charging. Wanted a matt black for less fuss but no stock so.... |
|
|
Dec 21 2016, 02:05 PM
Return to original view | Post
#14
|
|
Senior Member
3,854 posts Joined: Mar 2006
|
Facing another issue where my video that i take sometimes have the audio cut off intermittently
By the way was wondering if thise irings would stick to the surface of spigen liquid armor. Love this casing This post has been edited by aztechx: Dec 21 2016, 02:06 PM |
|
|
Dec 25 2016, 06:25 PM
Return to original view | Post
#15
|
|
Senior Member
3,854 posts Joined: Mar 2006
|
QUOTE(silencer5089 @ Dec 25 2016, 01:50 AM) Switcheasy glass case. Very suitable for black and Jet black units Wow u got it already?! Was envying this case for quite sime time |
|
Topic ClosedOptions
|
| Change to: |  0.0184sec
 0.98
 7 queries
 GZIP Disabled
Time is now: 25th November 2025 - 06:02 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.