i think is how to disable the EIST feature...

Then what is the meaning of "<10 word protector"????

To disable EIST, go to bios, look for CPU EIST function and set it to disable.....

haha , tis forum cant post if no 10 word ma , haha just simply write lo..
ya how to disale EIST

planning to get E6750 pair up with GA-P35-DS3

get nia E6850, hahaha

Simply go to BIOS and search for CPU features setting.

E6750 pair up with GA-P35-DS3
OR
E6750 pair up with P5K

Which one better guys?
I plan to do a little bit OC, budget around 400~500 +

Both have pro and cons. But I go for the cheaper.

for P5K, at least need Deluxe version. don't go with plain version. serious vdroop. for Deluxe and Premium version, got voltage damping option, at least can reduce some vdroop problem

But my budget only 400~500+ wor..how to get P5K Delux?

Then the P35-DS3 would be a good choice for your budget.

I'm also using this mobo with the E6750. Can OC the mobo till bus speed of 480Mhz without increasing any voltages. However, I can't seem to get past 480Mhz probably due to my CPU FSB wall.

My God.... what ram you are using?
this comming PC fair i plan to buy Twin X 6400 1GB x 2 800mhz....

How far i can OC? I read some review, 3200mhz is not a problme.... set mry 1:1 400 X 8 = 3200 mgz

It's in my sig. If you want good overclocking rams, our LYN ram guy (hmmm... guess who? ) will advise you to get rams with micron D9 chipsets like the D9GKx or D9GMH ones......

Ya, 3200Mhz for the E6750 should run at stock without any problems. I've managed to OC to 3280Mhz at stock by needs higher vcore if want to OC higher.

If you OC to 3200Mhz, then it would be ok for your rams as they will be running at 800mhz also... (1:1)

This post has been edited by kmarc: Aug 7 2007, 11:07 AM

TQ.... Gigabyte har.... alot of SG ppl tell me they prefer GA then ASUS....
P35-DS3 better than P5K huh... mm....

Errr..... I don't really know whether P35-DS3 is better that P5K or not if you put them head to head. Just that through my research, I found that the P35-DS3 was a suitable for me as a value-for-money performance mobo. You should compare these 2 boards and read some review on them too!

This post has been edited by kmarc: Aug 7 2007, 11:29 AM

Sorry to ask... koko kmarc, is P35-DS3 or P35-DS3R u recommend?

Aiyooo..... so malu..... don't call me that la.....

The difference between the DS3 and DS3R is only the southbridge chipset. The DS3 is ICH9 chipset whereas the DS3R is the ICH9R chipset.

The only difference I know is that the ICH9R chipset can support RAID function for the hard-disk. Other then that, they are identical.

In addition, the DS3 is so much cheaper compared to the DS3R.

Yup...is so RM100 buck diff =_="

Hai.. now consider another one liao... GA-P35-DSR or P5K-SE
price only 20 bucks diff ....

can DS3-R run SLI? It just says FireCross..

Nope. You have to get a more expensive one like the GA-P35-DS3P.....