Outline ·
[ Standard ] ·
Linear+
Continental CC6, Any Review?
zeng
|
Nov 20 2017, 07:10 PM
|
|
QUOTE(blvckskvll @ Nov 20 2017, 03:58 PM) This is how my tyre look like » Click to show Spoiler - click again to hide... « » Click to show Spoiler - click again to hide... « Different angle and after pumping air » Click to show Spoiler - click again to hide... « is it normal? well i havent decide to go the shop yet to check I think that's normal. What's the recommended pressure for your car ?
|
|
|
|
zeng
|
Nov 21 2017, 10:43 AM
|
|
QUOTE(blvckskvll @ Nov 21 2017, 07:09 AM) front 220 (32psi) rear 210 (31psi) The above pressure is adequate, however you may go all tyres for 250 (36 psi) for agility and FE. My wira is 37-38 psi. Avanza is 40-41 psi.
|
|
|
|
zeng
|
Nov 21 2017, 06:39 PM
|
|
QUOTE(kkk8787 @ Nov 21 2017, 03:43 PM) It depends. a) Basing on design weights of (wira) car OEM's, yes it's too high a tyre pressure. b) Basing on design of tyres (of various tyre manufacturers and association), no. It's not too high. I select my car tyre pressure, base on (b) above, not (a) if you get what I mean . This post has been edited by zeng: Nov 21 2017, 06:40 PM
|
|
|
|
zeng
|
Nov 21 2017, 06:52 PM
|
|
QUOTE(zeng @ Nov 21 2017, 06:39 PM) It depends. a) Basing on design weights of (wira) car OEM's, yes it's too high a tyre pressure. b) Basing on design of tyres (of various tyre manufacturers and association), no. It's not too high. I select my car tyre pressure, base on (b) above, not (a) if you get what I mean . QUOTE(kkk8787 @ Nov 21 2017, 06:40 PM) What's the Altis tyre size (pictures or specs or recommended pressures ) ? https://bobistheoilguy.com/forums/ubbthread...ent#Post4545523
|
|
|
|
zeng
|
Nov 21 2017, 07:11 PM
|
|
QUOTE(kkk8787 @ Nov 21 2017, 06:53 PM) 205/55/R16 receommended is 31, I always go 32 Yes, these tyres can go up to 36 psi at a maximum road speed of 160 km/hr. But the size of Vios can't carry that much weight.It's ok for FE. If you intend to go beyond 160 km/hr, then you need to up the pressure from 36 psi again.
|
|
|
|
zeng
|
Dec 12 2017, 12:15 PM
|
|
QUOTE(soohoe @ Dec 12 2017, 11:47 AM) Hi I would like to know this cc6 tyre price for 205/55 R16 for my fd1 i have change 2 new michelin xm2 at rear ald last weekend (sudah botak and must change) the front one i will change before cny 2018. so wonder this 2 match is okay? or i have to stick back to xm2 for the front tyre? You're already having good practice by installing tyres of similar thread on an axle. Tread patterns on front and rear axles need not to be the same.
|
|
|
|
zeng
|
Dec 13 2017, 12:48 PM
|
|
QUOTE(ahsam1212 @ Dec 13 2017, 10:46 AM) 150k km? Can really last that long? My tyres 60k gone most of the times I did 5.5 years with around 110k km with XM2 ....tread left was more than 2 mm.
|
|
|
|