Should be the latest firmware d... Insert microSD card and power on to check the functions.

Nothing much after setting up unless you want to self-install which very quick. Less than 30 minutes can install.

Should be the latest firmware d... Insert microSD card and power on to check the functions.

Nothing much after setting up unless you want to self-install which very quick. Less than 30 minutes can install.

I believe most cars' cigarette socket is unpowered already when you turn off the switch. If it is not, then, yes, remove the power socket.

The easiest way to check is to test with your car phone charger. Charge your phone when car is swithed on. Then, turn off the switch and see whether you phone is still getting charged or not.

As for me, I just leave the power socket on all the time coz it is unpowered when I turn off my car.

I think most car accessories don't have power after you off your engine. Only certain conti car will still power that socket for another 10-15 minutes if not mistaken.

Modified on: Wed, 16 Aug, 2017 at 10:34 PM

Link

Latest A119 firmware is released, version number is V3.3, below is the download link, or check the attachment:

https://dl.dropboxusercontent.com/u/2249321...are/FWBA119.bin
Change log:

1. Added: Parking mode feature
2. Added: Lock the previous file while the button pressed in the begin of 15s of current file
3. Improved: Change the sound for taking screen shot while pressing the menu button
4. Improved: One click to stop recording, mute/unmute while in screen save mode
5. Improved: No embed GPS info in the movie while GPS feature disabled.
6. Fixed: Screen on issue while detected on detection in screen save mode
How to update:

Please do the following to upgrade the dash cam

If your camera firmware version is V1.1 or earlier, please upgrade the loader LDBA119.bin first.

If you have already installed the V2.0 firmware, no necessary to upgrade the loader, please ignore the #3--#6 steps.

From V1.4 firmware, the firmware will be automatically deleted from Micro SD card after upgrade completed.
Use max. 32GB card formatted by camera or on computer as FAT32
Insert card in camera and connect it to computer using USB cable
Copy just the LDBA119.bin on the root of the card
After LDBA119.bin is copied to the card disconnect the camera from computer
Reconnect the camera to your computer and wait few seconds until you can choose Mass Storage from camera menu
Delete LDBA119.bin from the card using your PC and
Copy the FWBA119.bin file on the root of the card
Reconnect the camera to your computer and wait more seconds until you can choose Mass Storage from camera menu, the front red LED will be blinking while upgrading.

Now you can disconnect the camera from PC and enjoy new A119 implementations.