waaa .. 2-3 months no fly ah ??
or hide and whack sim kow kow for 2-3 months then become grandmaster liau ?? hehehehe

why need to use new nick ??
kena banned ah the old nick ?? hahahahahaa

the HELI did not finish yesterday ... but for sure will finish today laaa

---

Added on August 9, 2009, 11:57 amps ... why this morning come so early then cabuts and never stay ??

sheett jorrr .. i killed either the esc or the motor of the new heli
test test to balance heli paddles and oso to check for tail imbalance .. then after a few spin up of motor suddenly motor no more esc sound and stuttering liauuu ....
looks like new docile heli will have to wait much longer for its maiden
will either go back to recommended or super simple laaa esc to test ... need new motor oso just in case

New heli so easy spoilt one meh?

using the GZ motor and 30A CX ESC .. very powerful leh
i only apply not even mid stick ... gila babi power liau
maybe my curve in the tx too aggressive liau la ... i set about 70% throttle at midstik one (as per my PRO)

70% of the GZ motor is not same as 70% of my align motor maa ... even at 100% throttle oso should not be a prob la since that motor is made for that heli
dunno when can maiden this heli oso ... alot of things to troubleshoot .. namely the vibrations .. very kow kow
later will take out main shaft and see whether got bengkok or not altho never flown

yaa ... already know its very powerful
throttle up to 70% oso can feel the power kow kow liau
i think the curves for this heli will be quite different from the PRO one laaa

still not yet go take new motor yet .. previously 11t pinion .. seefoo suggested i go down to 9t just in case i feel its too powerful .. hahaha
but this morning itself i feel the PRO not enuff power liau .. tiuu jorrr .. so soon have to play play upgrade liau meh ?? hehehe

small tear will not affect helis like coaxial one laaaa
and oso those blades are not expensive .. if too many chips liau then one blade will be heavier so will cause imblanace and vibrations lorrr ...

your heli go 1 side .. please make sure your swashplate is level on your coaxial
by nature coaxials will only go up straight IF there are no wind or other factors ...

---

Added on August 12, 2009, 1:56 pm

batt bengkak mostly becoz of overdischarging ... i normally fly until 3.7v and above
on my PRO currently ngam ngam 5'30" ...
the other heli dunno yet coz not yet fly .. hahahahahaa
but i expect should be around the same time one laa ...

will try both and see which one i like la .. hahahaha
have to get the thing in the air 1st ..

already got my motor ... now waiting for seller to test motor see whether its motor prob or esc prob ... hahaahahaa
if the motor i kasi him to test one not working then motor prob lorr otherwise its esc something wrong liau

if all goes well .. tomoro i continue working on the heli
and if nothing else goes wrong .. heli should be airborne in a couple of days la

crashed the 4g3 again !!
trying to ff in the house .. hahahaha
this time damage was the tail again .. wires severed .. bearings popped out .. and the c-clip holding the whole thing together cannot be found .. its so damm kow small ... but still can use la the motor without the clip .. it will be depending on the magnet power of the motor to hold everything together .. hehehe
time to rewind motor again ...

only 1 heli flyable now .. 4g3 crashed out of commission .. the other heli not ready yet coz too many technical problems
so only remains the PRO that is still flying ... but this morning did not fly la .. overslept again .. hahahahahaa

---

Added on August 13, 2009, 4:06 pmi might be going to mega shop later ... u want anything ah ??
now fitting trex 450 tail rotors onto your NEON ... wanna piro gila kow kow ah ?? hahahahaaa
this sunday coming or not ??

of coz la better ... bigger surface area liau ma
i will prolly change the one on my on the way heli .. but fly stock stock a few times 1at b4 i change

ok ... only the 2 x 3S charge cable adapter rite ?? nothing else liau .... turnigy batt still no stock

---

Added on August 13, 2009, 4:18 pmu never answer whether this sunday u coming or not leh ...

yaa .. can charge diff brands but must be the same capacity laa
1300mah with 1300mah ok ... 1300mah with 1000mah or 1100mah cannot
your charger support 6S charging one or not ??
u will need the 6S charging/balancing port for it to work ...

ya .. bought liau
when u free ?? i can pass to u ...
this evening ?? wanna test test the PRO .. this morning finally crashed it .. hahahahahaa

whats FF together ah ?? hehehe
me NEWBIE and BEGINNER level only ..

FF = f**k friend
lol..
FF = Fun Fly~~

mine came with the 430SP .. runs damm hot
i heard the 450M is much cooler .. correct ah ??
anyways .. there is this strange sound coming intermittently from my motor .. i have oiled the bearings since the 1st week i owned it .. still has lots of power now but just noisy sound like hollow pipe with something rattling inside .. not the high screeching bearing kong liau sound
when this motor kong .. i am going to replace it with something not ALIGN i think .. very well recommended motor that runs extremely cool ..

no la .. scorpion is overated one la .. hehehehe
something else .. alot of kwai lohs say damm kow good and cool running .. power sommo
and the best part is .. its CHEAP .. huahahahaha

when u wanna collect your 2 x 3S charge adapter ??
this evening we go hover hover ?? hehehe

the 300 have to go buy 450 tail blades .. the stock one vibrate like sheet leh
so today will go buy the tail blades .. then have a look at the flybar from T250 or the 192mm t450 option oso coz i really hate those have to use screw to tighten on paddles stock ones laaaa

not downgrading la .. its downsizing .. hehehehe
T250 .. that one already on list .. not 100% confirm one
in the mean time have to try and get this 300 size up and flying 1st ... otherwise it will be an unfinished project for me which is not good
keep or dont keep the 300 size is another thing la .. hahaha

the place where i going to buy blades dont sell BEAM parts one ..
and mini titan parts oso quite NOT CHEAP .. hahaha
so just get the T450 v2 tail blades enuff liau lorr