wow... 1.3125v??? very very jealous... my fren got a L630B last 2 weeks n it oc very badly oso... can't even touch 380fsb @ 1.5vcore... maybe his board (p5b)problem oso (i suspect my mobo, ab9, can't go too high)...

neh, i dunwan to downclock my multiplyer... doesn't see any point going down except to reach high fsb but 400 x 8 = 3.2ghz but 370 x 9 = 3.33ghz wor... i wanna go 400fsb coz my ram is pc6400 mah... juz wanna do 1:1 to c how good/bad they can be...

btw, any mobo (c2d) good for mild oc (400+ fsb), low v drop, no need lots of vmod (can't understand most of the diagram) n has a lot of 3 pin fan support with software (like the uguru, coz it can go really silent automatically at nite when i'm sleeping with air cond on)...

huh?? is it hard to do 400fsb x 9?? well, i know it'll take 1.5vcore or more... but it'll be ok as long as it doesn't owez work in max load n oso keep load temp below 70 should be ok guar... dunno leh... as said currently running 370... u guys did orthos stable with ur setting oso rite??? btw, me using air cooling only... n not very large unit... AC freezer 7 pro n silencer NV5 plus 40mm x 23 high rpm fan for nb...

is abit aw9d-max worth to consider for my next change???

i can ask gdex ppl go ur house to pick up the board n thorw it to me in sabah if u dun mind... hahahaha...



for my fren b series, v tried changing hsf a few times, change board for testing(use on my ab9), change psu n gave up..! i guess not all b series can do amazing result... might be luck..! n gtghost really having 1 BIG luck... biostar??? i like that board oso, cheap n amazing but no 1 sell in sabah n oso no support in sabah...

huh...! MSI finally back for good???

so it's normal to set above 1.55v for 400 x 9 n load temp usually above 70 kah??? can't it be run for 24/7..??? well, i'm not loading it too much though... i'mm too noob to play with ram setting that's y i just bought the kingston hyper-x 800 so i juz set as recommended... maybe 1 day i can ask sifus here to help for ram guidance..

n/b starp just leave it at 1066, cpu:dram set to 1:1, ie, default 4:5, fsb 350:437.5, ram is running at 875mhz... dat's too much without some serious tweaking at the ram timing n vdimm...

up ur vmch, vmchio n vdimm too... (add a 40x40x10mm fan on top of the nb will help cooling it down enuf)

the rest of the cpu functions (in bios) ie:

c1e
intel speed step
virtualization
EIST
bla bla

all disable...

my previous mobo with e6600es... it did 370fsb x 9 stable n cool for daily usage... but i only use them for 1 month +, then sold...



wish u luck, remeron...

This post has been edited by HaHaNoCluE: Apr 22 2007, 01:25 PM

400 x 9..? i'm using 1.55 too but idle at 56 dig... load is 70+ dig....

so i went back down to 370 x 9 at 1.375 vcore... btw, i'm juz using a artic freezer 7 pro though so if i change to something bigger i guess it might help to shave off 5 dig..

i' running 400 x 9 (3.6) orthos stable at
1.55vcore
2.20vdimm (team vr)
1.90vmch

idle temp 49 to 51 (arctic freezer 7 pro at around 1900rpm)
load temp 69 to 71 (rpm at max)

is it ok for 24/7???

hmmm... 3rd party cooler??? i was looking at tr 120 ultra but it does cost a bit xtra at rm250 if i'm not wrong... but i oso wonder y my team rams (micron d9gcn) oso need so much v??? i set them at 400mhz 4-4-4-12 memtest pass at 2.1vdimm... i can boot into windows with 1.5vcore... fail orthos after 1 hour...

i did 400 x 9 on air with my e6600 L631A but idle 52 load near 70...

i'm using arctic freezer 7 pro... but room temp is around 26... it might help if i blast the air cond kaw kaw... planning to go wc, c how it'll perform...

sure 965-s dark... wc will gif me more trouble in maintenance i guess, but open casing gimme me lots of maintenance too... very dusty... close case gimme he heat (even big casing)... the down part of wc is that i owez change parts, so not very convenience... i juz wanna try c if wc can help lowering my temp by A LOT..! coz if not i'll go back to air but maybe i'll try tr 120 ex with hr-03...

actually i need to increase slightly all the voltage of core, mch, bla bla, except the dimm when i go from 400 x 8 to 400 x 9... the temp oso increase very very much...

huh QX really has very bad temper huh..? hahaha... i think VT-Ten, u should try geminII 1st... if doesn't fulfill what u want then juz sell it off 2nd hand still might depreciate around rm50 like dat only... n juz go wc...

hey mou la la... hehe, jk.. i think since u r picking a budget proc, it doesn't justify to get a mobo that's too expensive, else if u r going to change proc very fast... i guess any 965 proc around rm350 will do very well for oc up to 300+ fsb... otherwise, there r a lot of p35 mobo around for about rm500...


saw very good oc result (unmod) of abit ip35-pro mobo... wonder if it'll be in malaysia soon... i've asked their distro but not avail yet... giga va-p35-ds3 seems much affordable for fun...


btw, does wc nb help much in oc??? aiming to do 400 x 9 24/7... going wc the proc asap the kit reach my home...

hey to be truth... c2q faster than c2d a??? i mean i dunno if xp/vista can utilise so many cores... soli a noobs q... hehehe...

orthos stable??? what is the idle n load temp??? n oso room temp??? nice result u got ther, sumore with air...

irenic, is that orthos stable??? omg, that's a new reason y i can change proc now...

VT-Ten, 4000 x 9 is dammmmmn high leh... 36.0ghz wor... sumore @ 1.38 vcore only sure bsod lar...

irenic, ur e2160 wanna sell off??? pm me if u do, me looking for 1 for secondary rig... tq...