just for ur reference: mine e6400 @ 3.2Ghz @ 1.375v @ Ultra-120 @ 2 folding load = 56c 

i bet he mentioned bout intel original board.

Not change, just build another system only, I dint try Prime stable, bcoz my temperature  is too high, when run SuperPI the temperature already grow to 63c.
CPU Voltage : 1.65V
FSB Termination Voltage : 1.5V
(G)MCH Voltage: 1.55V
Memory Voltage: 2.2
Not sure is it my proc hit the wall or using cheap cooler(rm69, it look like zalman cpu cooler) and cheap powersupply(Atrix brand, 550W last time i buy rm168 only).

another good thing bout this intel board is it's very stable and no double restart.. all my previous boards did double restart (ds3,ds4,dq6,biostar 965pt, asus p5b dlx, asus p5w dh dlx)..
and summore if overclocking fail, u just need to switch off psu for around 10secs then it will revert the bios back to default.

Ya.. i buy bcoz its transparent and BLUE.
I dint use AS5, i buy the packing 1,Silicon grease(Silver) 5 tube for rm10, each 1gm.
N i find out my cooler brand name is Dragon Head Copper CPU Cooler(F1).

orthos cant be run so i guess not stable but 24/7 not crash....vcore e6600 is at 1.4v

i get it for rm240 so far so good though..

can anyone confirm what board can adjust multiplier ?
my friend is getting an ES soon

Yea.. normally most E6300 capable to hit 400fsb with stock or lower vCore.
I think 400fsb is a sweet spot if u dont wanna stress yuor proc too much.

can apply lower? mayb i shd go lower now 
F9 is official realease bios from gigabyte? 

then i would like to join you in the club....my ds3 oso just died...with extra stuff somemore...it burn my 7950 gx2...
my update went wrong stated there unsucsessfull so it revert back to it original bios...but then when i reboot it failed to boot it loopin for 4-5 times and suddenlly my 7950gx2 burn...
i dont care bout the board coz using the p5b now but the gc...oh nooo...really sayang that 1....i want to rma it....hope can rma it la...

Me also in da club.. b4 u2 join it. Last month i burnt my S3 board becoz din't set default b4 flash BIOS.
ppl burn fireworks to celebrate new year.. u burn mobo and graphic lol

oo just realize u got the version1 of FMA 

I using F9 also...FSB475X7 @ 1.45v....100Mhz better than previous with acceptable vcore...  
Just remember to load fail safe/optimized setting b4 flash...to reduce the risk ....

I've got a weird problem here.. Manage to pass 6 hours of orthos @ 460 x 7, but as soon as I shutdown my computer, I cant boot it up back. (those kentut's that you get when  you fail an overclock.) Pretty annoyingg..

Im using ds3[f9] with e6300.

Does it work?

I've toned down to my previous day to day oc @ 400x7. Still no restarting errors yet. But just find it annoying that at max stable settings, i cant restart the computer!  guess its not stable after all..