Intel® Core(tm)2 Duo/Quad Overclocked Rev. 2, Going beyond factory limits
|
|
 Feb 23 2007, 06:26 PM
Return to original view | Post
#21
|
 
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah   
|
oh ya forgot about the ram timing.
it is 5-5-5-15 at first. 5-7-7-18 put some stability when playing dota, but only hold up for 40 minutes then my system reboots. do mean MCH & FSB is +0.1v only? im using F10 right now, or should i go back to F8?  so what's the prob? This post has been edited by BlackThyra87: Feb 23 2007, 06:30 PM |
|
|
|
|
|
Feb 23 2007, 06:34 PM
Return to original view | Post
#22
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(siauann @ Feb 23 2007, 06:30 PM) urs is a C4 hynix? nope. mine is XMS5402v8.1 PROMOS chip (confirmed from Corsair's RAMGUY)5-5-5-15 shd be no problem running @ ddr800 i believe... y not u try this setting... vcore=1.325v (stock) fsb and mch = +0.1v vdimm = +0.2v timing = 5-4-4-12  i wish i could get that hynix.  do u think that reverting back to F8 will improve stability and lower voltage? i will try.. This post has been edited by BlackThyra87: Feb 23 2007, 06:35 PM |
|
|
Feb 24 2007, 04:40 AM
Return to original view | Post
#23
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(siauann @ Feb 23 2007, 06:30 PM) urs is a C4 hynix? tried that settings. no luck. even im using F8. 5-5-5-15 shd be no problem running @ ddr800 i believe... y not u try this setting... vcore=1.325v (stock) fsb and mch = +0.1v vdimm = +0.2v timing = 5-4-4-12  looks like my ram really holding my oc setting. recommend me some cheaper and nice oc potential!  This post has been edited by BlackThyra87: Feb 24 2007, 04:43 AM |
|
|
Feb 25 2007, 12:01 AM
Return to original view | Post
#24
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
im switching to Micron D9 chip soon. anybody has some thought to share about DS3+D9 combo?
|
|
|
Feb 27 2007, 11:41 PM
Return to original view | Post
#25
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(siauann @ Feb 25 2007, 01:22 AM) im using it...DS3 + D9...i can say D9 is a great ram...a lot room for oc..and DS3 is a budget oc mobo... yeah. with my current D9GKX (from sHawTY  ), i got 3.2ghz, DDR916@ 4-4-4-10 at 2.1v, orthos stable. the ram capable of clocking over 1ghz @ 4-4-4-10 too...  here's some results of Pi performance: 1m -  32m -  This post has been edited by BlackThyra87: Feb 27 2007, 11:50 PM |
|
|
Feb 28 2007, 10:49 PM
Return to original view | Post
#26
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(tAmp0i @ Feb 28 2007, 10:47 AM) Is that result from 3.2GHz, DDR916 4.0-4-4-10? Thanks.... yes, those are the results from 3.2GHz E6300, DDR916@4-4-4-10 / 2.1v This post has been edited by BlackThyra87: Feb 28 2007, 11:14 PM |
|
|
|
|
|
Mar 1 2007, 10:49 PM
Return to original view | Post
#27
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(RokXIII @ Mar 1 2007, 07:42 PM) Bro, mind to tell me how much u feed ur vcore? hmm at 3.2Hz, it was 1.38v, but not very stable, i played hours of dota and it got hanged. so i thought 1.4v would be doing just fine |
|
|
Mar 4 2007, 02:40 PM
Return to original view | Post
#28
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(siauann @ Mar 3 2007, 01:14 PM) i can run 3.15ghz @ undervolt OMG. u got one hell of a processor! probably 1 in 1000 qty!   btw, any tricks i can follow to achieve that kind of settings? ATTN to Mr. tAmp0i Please update my cooler info in the 1st page. im using CM Hyper48 though. and also, i updated the screenies down at my sig there. thanks. This post has been edited by BlackThyra87: Mar 4 2007, 03:01 PM |
|
|
Mar 10 2007, 02:51 AM
Return to original view | Post
#29
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(Spootid @ Mar 9 2007, 10:45 AM) Guys... having a hard time overclocking my C2D... First off, lemme give you info on what I have for my system... -Intel C2D E6300 proc -Biostar Tforce 965PT mobo -512MBx2 Corsair DDR 6400 RAM -and other stuff... Now... I've tried everything to make my PC run at least 400FSB... but each time I increase the FSB past 266MHz... my PC cannot boot-up... I've increased the voltage also... My RAM shouldn't be a prob rite...??? Coz it already supports DDR800 rite...??? So what gives...??? Please help me...??? Newbie here... and I would like to at least rum my PC at 2.8GHz... QUOTE(mfcm @ Mar 9 2007, 02:27 PM) wat voltage u up?the ram u setting manual?ur psu enuf power?u disable important part in bios b4 u OC? E6300 can do 2.8GHz with NO voltage increase. agree with mfcm: 1 - get good PSU to ensure stable voltage across the rails, especially the +12v rail. 2 - Disable unnecessary bios features like NX bit, power saving functions.. etc. 3 - set the ram divider/ram multiplier to 1:1, put at least 2.1v on the ram @DDR800 4 - shoot the fsb. u might need to add some voltage at FSB and MCH when runnin 400 fsb. good luck. |
|
|
Mar 10 2007, 02:30 PM
Return to original view | Post
#30
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
1m Pi Score update:
currently at 3.4GHz (1.4v) / DDR2 972 @ 4-4-4-10 2T (2.2v)  Validation!» Click to show Spoiler - click again to hide... « |
|
|
Mar 13 2007, 01:24 PM
Return to original view | Post
#31
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(Spootid @ Mar 13 2007, 08:53 AM) Well... I'm using an ACBel 400W Intelligent Power with active PFC PSU... I think that should supply enough power rite? As for the other settings, I did run my ram divider/multiplier at 1:1. Never increased the RAM voltage though... along with the FSB and MCH voltage. As for the BIOS features, I will try to do that later in the day... Will keep you guys posted on this... normally, 300 fsb sure 100% not prob for C2D. and im thinking it's ur mobo which is holding ur OC back. If u run 1:1, ram sure no prob as 1:1 equals to 300x2 = DDR600 only. Dont forget about the vdimm voltage though.p/s... I tried increasing to 300MHz FSB... also cannot... PC suddenly reboot with a beeping song... as if the RAM's faulty...  After reboot, the PC's setting back to normal... |
|
|
Mar 13 2007, 05:43 PM
Return to original view | Post
#32
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(sHawTY @ Mar 13 2007, 05:35 PM) Good. i'll test my pair too Now i'm running my two pieces of GKX @ 4-4-4-10 @ 1GHz at 2.25Volts. Priming now. It's already 6 hours. Gonna post the screenshot after done more than 18hours, or maybe after i come back from johor tomorrow night. That means i'll be priming my pc for 2 days! lol! After priming, i'll do superPI. And try the 3DMark benchmarking again.  Edit: Guys, is it okay if i were to prime my pc for 2 days straight? I'm on swiftech watercooling though. for me, 1ghz @ 4-4-4-10 @2.2v is very easy to achieve for GKX though.but im too lazy to do prime for more than 10 hours lol but so far 13 hours stable for me (it was 2x GKX from u)  but forgot to take screenies. btw, u on WC sure no prob la. but the ram must take at least a good HS lor.. p/s im thinking of buying AllnGap's ram cooler mod This post has been edited by BlackThyra87: Mar 13 2007, 05:45 PM |
|
|
Mar 14 2007, 02:29 PM
Return to original view | Post
#33
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
i just managed to improve the 1m score a lil bit.
same speeds n timings. but i got better score: » Click to show Spoiler - click again to hide... « Mr. tampoi pls update This post has been edited by BlackThyra87: Mar 14 2007, 02:33 PM |
|
|
|
|
|
Mar 15 2007, 01:41 PM
Return to original view | Post
#34
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
i tried 500fsb with my DS3 (F10 bios) but i cant boot into windows...stuck at the windows loading screen.
anybody have a tip to do 500 fsb with DS3? |
|
|
Mar 16 2007, 03:47 AM
Return to original view | Post
#35
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(warrior @ Mar 15 2007, 09:38 PM) Hi all, finally i get to join C2D club bro? how's ya temps? core1, core2 and die temp. My rig as below... Motherboard : MSI P6N SLI Platinum Processor : E6600 Memory : 2x512mb Corsair TWIN2X1024-6400C4 Cooling : TT Big Water 745 |
|
|
Mar 17 2007, 06:02 PM
Return to original view | Post
#36
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
gtghost...
thats nice voltage there... even i got B2 rev (week 27), i cant seem to achieve like what u just did. i can only boot into windows @ 3.2ghz, 1.325v (default) but after 1 minute of orthos, it fails. At 3.2ghz i need 1.4v at least though. This post has been edited by BlackThyra87: Mar 17 2007, 06:02 PM |
|
|
Mar 18 2007, 12:21 AM
Return to original view | Post
#37
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(gtghost @ Mar 18 2007, 12:17 AM) Ah thanks bro, Is default 1.315 or 1.325? I thought it was 1.315??? It's on biostar 965PT. well, in DS3, the default is 1.325v. im running orthos at 3.2GHz with 1.375v now. so far 1.5 hour stable |
|
|
Mar 24 2007, 03:18 AM
Return to original view | Post
#38
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(Hyde`fK @ Mar 24 2007, 03:17 AM) Hmm, my previous E6600ES overclock to 3.2ghz with 1.5vcore, idle temp 48c, full load 51c. huh are u serious?i can do 3.2ghz with less than 1.37v orthos stable. how come u need 1.5v?  TT BTvx so good yaa? This post has been edited by BlackThyra87: Mar 24 2007, 03:20 AM |
|
|
Mar 25 2007, 07:19 PM
Return to original view | Post
#39
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
yep... at 860mhz can do 2.1v @ 4-4-4-10 no prob...
|
|
|
Mar 26 2007, 12:31 AM
Return to original view | Post
#40
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(irangan @ Mar 26 2007, 12:27 AM) Actually I did that benchmark during LanParty. Just OC for fun. Havent really tweak it to the maximum. Hehe.. Yeah, I do think 2.1-2.2vdimm is good enough but I put 2.3vdimm, just to make sure everything go smooth. I HATE RESTART Noctua NH-U12 is THAT good? My IDLE at 3.87 is 43'C My FULL LOAD at 3.87 is 56'C 56C at core temperature or die temp? This post has been edited by BlackThyra87: Mar 26 2007, 12:32 AM |
|
Topic ClosedOptions
|
| Change to: |  0.0659sec
 0.66
 7 queries
 GZIP Disabled
Time is now: 11th December 2025 - 05:09 PM |
Quote
