Got.

U can use brake pads for Waja.

Pls check more info at smartcarsmalaysia.com

We, as owners have list down compatible parts.

---

Added on August 21, 2010, 2:35 amNo worries. Did u know many AMT parts from a Citroen C3 will work on smart forfour?

This post has been edited by acbc: Aug 21 2010, 02:35 AM

U need to sign up as member first.

What's your username?

I'm an owner of the 2006 model.

Only 2 problems so far... clogged throttle body (easily solved, remove and clean with carburettor cleaner). 2nd is the steering rack failure (no choice, bought used from chop shop and replace).

Car is now problem-free.

The 4/4 has many advantages... one of it is cheap parts since it shared 60% with Mitsubishi Colt. And many parts are available from Proton itself.

---

Added on March 10, 2011, 8:12 amOriginal disc pad will cost over 1.4k!

Just use pads for Waja or Volvo S40... cheap, less than RM 400 all around.

---

Added on March 10, 2011, 8:15 amBefore buying a cheap 4/4, do test around. Or better yet, PM me the car plate number and will run against SCM database to see if the car has accidents or not.

This post has been edited by acbc: Mar 10 2011, 08:15 AM

Agreed. Gearbox itself is ok but the motors... one for controlling the clutch and one for shifting gears are sensitive. Fortunately, a local mechanic here has done a motor replacement for less than RM 3k.

Never ever send a smart to normal workshop. U need a Merc specialist. I sent mine to Keng Chuan for routine service and software updates every few months. Recently had the power steering replaced for RM 3k (official from Merc is RM 10k).

Problem-free car with superior FC. Love the paddle-shifters too.

Depends. If u know where to shop, parts can be cheaper and easier to obtain. My smart is already 3 years old and everything is perfect.

---

Added on May 25, 2011, 11:03 amWhat high maintenance? It shared 60% of parts with 2004 Mitsubishi Colt la!

Brakes 100% compatible with Proton Waja or older Volvo S40
Oil filter is 100% compatible with Proton Gen2
Oil sump nut is 100% compatible with Proton Wira 1.6 (4G92)
Wipers available from Tesco and Carrefour from RM 20 onwards
Clutch plate available from spare parts shop in Segambut for mere RM 1.3k and another RM 300 for installation

Only electronics is from Daimler-Mercedes which can be expensive if it breaks down.

Some u can service DIY such as electronic throttle body. Simply remove the throttle body, spray some carb cleaner and put it back. Will save RM 200 in service fee.

I did all the minor mods and servicing myself. If u love the car, u will find ways to minimize cost.

This post has been edited by acbc: May 25 2011, 11:03 AM

All the above 100% compatible with 2004 Mitsubishi Colt. Take the old items and pay a visit to many spare parts shops along Jalan Segambut or Jalan Ipoh. For suspension, u can also opt for custom made by Titan for around RM 3k.

Service brake failure means the sensors are dirty, ensure u clean those first before putting on new pads or else u will get the same warning.

For those looking for door visors, I may have a solution - custom made / order to fit. No cutting or curi from another car.

Sure, if u are in KL or PJ, u may contact me. Some used models have gearbox or steering problems.

5 years? Either u hardly drive or those original brake pads damn good quality. Mine kaput after 3 years.

Done. Try to login now.

Can u register again. I just took over from previous admin.

Actually, the Passion sold here is full spec. In UK, Pulse is full spec and Passion is base spec (even aircon is optional).

JB no idea but over in PJ / KL, there are 3-4 reputable workshops who can handle smart cars.

All smart cars sold here have no reverse sensors. I have to install one for my forfour 2 years back.

U can try Keng Chuan Electrical Auto Service in Sri Damansara. They do mostly Mercedes and have access to smart parts. Price usually cheaper than German Motor or HSS / CCB.

If u are adventurous, many Proton / Mitsubishi parts are compatible with the forfour.

No problem. I'm an owner of a 2006 black/silver forfour myself. Normal maintenance is almost like a Proton since 60% of parts is Mitsubishi. Only electronics and body panels are from Mercedes. Being plastic, chances of being dented by other cars is minimal unless accident.

Clutch not compatible with Waja or any Proton parts. U can use 2004 Mitsubishi Colt. Advice to bring a sample when sourcing the parts yourself.

Yes. They are very busy people. Too many smart cars there now. Mine need to change suspension and anti roll bar also need to call many times. Better drop by instead.

Where are u located? I'm planning to drop by today or tomorrow evening. PM me.

Yes. Ensure the rear O2 sensor is 2" away from the exhaust pipe. If same distance, Check Engine light will appear.

Yeah. Replaced mine twice in the span of 8 years.