Why the regret? Though I may understand why. It seems slow.

The TM silk screened one that I have now is FW: v2.06 HW: B1. First thing that hits me is that web interface is really slow. Haven't really tested the 850L but for now I feel the RGX4400 is a better choice. I've been using the RGX4400 at a nearby coffee shop almost everyday. It's really fast. It can handle 20-30 typical kopi shop users with no probs at all.

I wonder how the 850L holds up.

That's true, it's got a really nice web interface. Free dlinkddns from dyndns is always my favourite feature of DLink routers. The QoS by device look very simple to use.

Built-in AP mode selection is good for those just want to use it as an additional AP.

Shareport is very easy to setup but no FTP. It's webdav right? Must try it one day.

Lastly, they don't attempt to hide the PPPoE password. It's there when you need it.

Things I don't like about it so far. 1 x USB2 port, no FTP, no SNMP, no telnet, no SSH (but most ppl won't need the last 3), cannot change Admin username.

One day will test it to see how many connections it can take before dying. it has 128mb RAM but not sure how much of that is free.

Edit: No link lights for the ethernet ports. Why?

Are you on 2.4 or 5GHz when the problem occurs? Some installers like to separate the wifi and some not.

In my uncle's house, the installer setup the same SSID for both freqs. My phone preferred connecting to 5Ghz and it was just not good enough for the whole house. So we separated them and connected only to the 2.4Ghz SSID and that pretty much covered the whole house with adequate signal.

anyone here got lucky invitation from WEBE postpaid plan?

After 9 months of using Xiaomi Nano router as AP, I will bid farewell to it and replace it with Huawei WS880 tomorrow.

Can I know if I can give the Nano router to my sister who is using Streamyx now and will change to UniFi soon once it is available at her area, can she use it as a repeater? Her house is a double-storey semi D and router is placed at upstairs. Sometimes the signal is not so strong at downstairs so I was thinking to suggest her to do something for her downstairs, can this be done?

Oh, that's great! Do you have any guides for this or how can I Google? Just Google repeater or something?

Hey guys,

My parents just applied 100mbps unifi and they're using wifi since the TV is in the area of dining table on the 2nd floor and their room in first floor. (they're not strong enuff to walk up stairs)

Run some tests and found out that they've been using 10-20% of the speed from their wifi. Even after the unifi guy came and switch it to the "further channel" of the wifi (his words not mine).

So my question is what kind of affordable router should I go for?
ps: my mom hates messy cable lying around the floor (she always trip on it) , is why they use wifi

These 2 weeks have been horrible, connection anywhere out of MY/SG is horribly slow. Downloading files at only 30kb/s   

IP Range : 175.141.xxx.xxx   

Any idea what's happening? Haven't been catching up to the news. Some cable broken or routing issue? 

tm unifi use new router again  " TPLINK Archer C5"

what is the default username and password ????

can we use 2.4G Wifi 15 dbi high gain antenna booster female SMA Connector to extended wifi coverage ?

when the problem start? last night?

When was this? I had no issue last night and this morning.

sadly changing IP wont help. i tried a lot and all have the same problem.

true, have been having shitty connection. even using the Hola VPN doesn't help. any other suggestion guys?

Anyone here using  NETGEAR ROUTER AC3200  NIGHTHAWK X6 R8000 router ?

Please advice which is better to purchased ASUS AC3200 or NETGEAR ROUTER AC3200.

Thnx

Bought TP-LINK Archer AC2600, now ground floor manage to get full speed 100mpbs.
Do you know how to set ipv6 on this router?

Not all will have. Only selected customers for now.
Of course good routers make a difference.
blacktubi, your fan spotted here.

hi , is there any way to make complaint to tm ? i already try phone call , email , chatroom and even cfm , they still din solve the issue , everytime i make the report they close it automically , and say your service been attended .

my issue is regarding cannot browse some of the china website.