Brought to you NIMITZ (Original) rear-view mirror mounting kit for Xiaoyi Yi , Yi 2.7k, Xiaomi Mijia, 360 1st and 2nd generation Car Camera / Dashcam / Driving recorder
** Solid mounting + Hiding/concealing + Minimal visual blocking **
GUARANTEED ORIGINAL NIMITZ PRODUCT, NO CLONE/IMMITATION!
** Solid mounting + Hiding/concealing + Minimal visual blocking **
GUARANTEED ORIGINAL NIMITZ PRODUCT, NO CLONE/IMMITATION!

============================================================
Value: Why you need rear-view mirror mounting?
============================================================
Value: Why you need rear-view mirror mounting?
============================================================
3 Main Advantages:
(1) Solid and steady mounting:
Suction cup mounting - drop/fall in times may damage lens surface and causing ugly bubble wave on costly car tinting film.
Sticker mounting - could tear off tint film if being removed and may also drop when the sticky rubber layer get overheated & hardened in times.
Rear-view mirror mounting - no dropping and no damaging windows tinting film.
(2) Hiding/concealing car cam:
Too obvious of your dashcam to be seen by suction cup / sticker mounting?
Afraid of break-in stealing your dashcam?
Then you need rear-view mirror mounting to hide it just behind mirror.
(3) No visual blocking:
Rear view mirror mounting of dashcam enable least visual blocking, better driving experience. No gadgets blocking on windsreen anymore.

============================================================
What are available in this Nimitz package?
============================================================
What are available in this Nimitz package?
============================================================
This is Nimitz *Special Edition* contains all adapters for XiaoYi Yi (all versions), XiaoYi Yi 2.7k, Xiaomi Mijia and 360 (generation 1 & 2) dashcam.
This is not generic Nimitz edition (explained in Q&A later).
Nimitz products updates: Nimitz keep abreast of latest development to add in / remove unnessesary parts from batch to batch.
First edition 2016: basic components for Yi and 360:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Provides extra sticker adapter, just in case one would like to stick dashcam to rear windscreen as 2nd camera for rear recording.

June 2016 edition:
~~~~~~~~~~~~~~~~~
Improved edition: 2 new accessories added.
a) Long pillar
b) Joint body of 14mm and 16mm ball room size

Long pillar major improvement:
By using long pillar, you can now easily tune into better angle to enable dashcam fully covered by mirror where as short pillar with limited angle adjustment may still expose partial of dashcam body out of mirror casing.
Tips: best use 300mm wide mirror to conceal dashcam.

Joint body of 14mm and 16mm ball room size:
It is designed for 360 dashcam, one end with 14mm ball room size, the other end is 16mm ball room size.
It allow users use original 360 adapter that comes in non-standard 14mm ball size.
End of 2016 edition:
~~~~~~~~~~~~~~~~~~~~
Added adapter for 360 dashcam 2nd generation.
Withdraw joint body 14mm>16mm ball room size.
January 2017 edition:
~~~~~~~~~~~~~~~~~~~~
Replacing pure metal nut with manufacturer redesigned pom plastic body with metal nut inside (to counter clone/immidated Nimitz products in market).
However, ONLY FOR MY STOCK, I added extra metal nuts so you can use back metal nuts if wanted.
April 2017 edition
~~~~~~~~~~~~~~~~~~~
Added Xiaomi Mijia adapter
Added plenty adapters for 360 dashcam.
Officially support 3 manufacturer dashcams, namely Xiaoyi Yi cam (all variants), Xiaomi Mijia cam, 360 cam generation 1 and 2.
August 2017 edition:
~~~~~~~~~~~~~~~~~~~~
Added adapter for latest XiaoYi Yi 2.7k dashcam.
Officially support 3 manufacturer dashcams, namely Xiaoyi Yi cam (all variants), Xiaoyi Yi 2.7k, Xiaomi Mijia cam, 360 cam generation 1 and 2.
October 2017 edition:
~~~~~~~~~~~~~~~~~~~~~
Withdraw 70mm long screws x2 as not really useful by customer feedback. If really need you can get these long screws at local hardware shop.
============================================================
Q&A:
============================================================
Q&A:
============================================================
Question 1:Nimitz VS other brands/clone/immidated ~ Why choose original Nimitz instead of cheaper others?
Answer:The rule of thumb in biz world: cost = quality always prevail. Nimitz is using better material and in better design.
1.1) Clipping structural design flaw:
Others is using 1 side screw fastening, whereas Nimitz provide both side screw fastening, balance and stable!
Other's mounting diameter is FIXED. For slimmer pillar, user must add in multi ruber liner to get it hold up. But multi layers of rubber liners also can cause slippery in bumpy ride, not steady focusing any more.
Nimitz supports variety pillar diameter size from min 12mm up to xx mm as long as you got long screws of that length. Just need 1 rubber liner to strengthen stability.
** Nimitz provides both side screw thighting up, fitting variety of pillar size. Stability achieved with 1 rubber liner only !!!

1.2) Screw and nut material:
Nimitz's screw and nut are made of metal, whereby other makers use metal screw + plastic nut.
Nimitz enable consistent strong fastening power, whereby others with plastic nut would degrade fastening power over times.

** Please Take note of Nimitz January 2017 edition product updates in above.
1.3) Rubber liner design and material:
Nimitz rubber liner is more elastic (flexible), with matte friction finish that provide more grip power.
Others' rubber line is less elastic (flexible), with flat finish that provide less grip power.

1.4) Power USB cable management:
Nimitz joint body provides cable storage hanger to pass through usb cable neat and tidy, no mess up.
Question 2: Is this Nimitz generic/standard package? Is generic/standard package fit Xiaoyi?
Answer: No, this is special edition. Nimitz general/standard package comes with different multiple adapters but not fit XiaoYi, Xiaomi or 360.
Question 3: Authenticity, is your stock original NIMITZ? I saw some overseas ecommerce site selling at much higher price.
Answer: Yes, it is original NIMITZ stock.
1) Every Nimitz package comes with authenticity checking sticker on its instruction manual!
2) Engraved Nimitz brand name on accessory and rubber liner!
3) I got the stock from NIMITZ directly, namely from Nanjing province, China. Not from other famous trading province like guangzhou, shenzhen, etc whereby many imitated/clone products exist.

Question 4: Ready stock or preorder or ship from overseas?
Answer: Yes, it is ready stock. No need wait 2 weeks or 1 month or preorder all that.
Question 5: Should I need specify for which dashcam when ordering?
Answer: Nope, all adapters bundled in single package.
Question 6: Can other brand of dashcam using this Nimitz rear-view mounting kit?
Answer: Yes, as long as the dashcam is come with adapter with ball joiner, and the ball diameter is around 15-16mm then can fit in Nimitz body.
============================================================
Purchase with puchase Offer:
============================================================
Purchase with puchase Offer:
============================================================
100% concealing your dashcam/ driving recorder!
One main purpose of applying rearview mirror mounting kit is hiding up your dashcam.
But what if dashcam casing is not pure black color? It would still visible. Modern dashcam got variety of color, such as grey, gold color.
For security matter, dashcam casing color is better 'tuned' into black.
Solution: Stick a dark solar tint film on dashcam casing for:
a) concealing dashcam
b) helps heat rejection
Available now this 100% dark solar film, best use for this purpose. It is a true solar film, not dye plastic film available in Mr.DxY. According to supplier, this film use korea material.
3M -super thin -high temparature resistance -double sided tape would be provided to stick the film to dashcam plastic body. This is a type of 3M tape being used for smartphone digitizer screen replacement, not those in stationary shop. (a few short strips cut off, NOT A WHOLE ROLL YA!)
Solar film helps reject heat being absorbed by xiaoyi dashcam, remember, xiaoyi use rechargeable battery, heat do harm to battery.
Using non-solar film black paper or carbon paper would absorp more heat because black color does not reflect light. Take note.
PWP: Juz add RM4, u can get 1 piece of darkest solar film (cut off size around 10cm x 6cm) + 3m tape strips (cut off, a few strips).
Here got pictures illustration:

============================================================
Dealing:
============================================================
Dealing:
============================================================
Price: Nimitz mounting kit alone (new batch) - RM25
PWP optional: black solar film + 3m tapes - add RM4
Poslaju add RM7.50 peninsular, RM10 sarawak, RM11 sabah
or
COD available at KTM station
PM or Whatsapp: zero one six- 996-3861
This post has been edited by coolstore: Oct 25 2017, 03:40 PM
May 15 2016, 09:07 PM, updated 7y ago
Quote

0.0364sec
0.96
6 queries
GZIP Disabled