i Know, update bios like syok sendiri oni. i think got bug fixes la..
i know amd platform is abit hotter, but this is too ridiculous....normal use also can go up to 85C, wtf??

the story is like that...I send my lappy to service center b4...b4 i send, my processor can only run at 1.8ghz full, canot set to other frequency...

then after get my lappy back from HP service center, the engineer claims that he change mobo and update bios for me...but then go home i try, i can set processor speed liao...terkejut....i mean if u set on control panel power option to portable/laptop, it will stay 800mhz, and when u set to home/office it will stay on 1.8ghz, if u set to always on, it till be jumping around from 800mhz 0.8v to 1.8ghz 1.1 v....i like that feature....i duno what he did to my lappy, at first i tot update biosthen got this feature liao...this is good to monitor the heat...

but problem starts when i formatted my lappy recently...it set back to all same, no mather u set what in the power option, it will jump around from 800mhz to 1.8ghz....i duno why, canot set liao....i mean if we r travelling we wan to save power, we want to set it to always 800mhz to monitor heat and batery power ritght??

i suspect is the chipset driver...anyone punya lappy run like what i say above kah? can i have ur chipset driver and proc driver?

arrr? vista got that kinda processor setting?

---

Added on April 17, 2008, 9:50 pmdoesnt matter vista or not..as long as windows 64 bit then can get 4GB RAM ady...

This post has been edited by jediknight7sam: Apr 17 2008, 09:50 PM

Win XP got 32 bit and 64 bit ma

Win Vista also got 32 bit and 64 bit lo...

by the way, i would like to know where is the location of the GPU? I feel very weird, coz if mine hits around 80c, then it must be super hot at the bottom when i touch...but i tried examine the bottom of my lappy Proc 45, HDD 50, i only feel this 2 place hot....if u know what i mean...

from what i know, only 64 bit windows OS can detect ur 4GB Ram if u add untill 4GB..correct me if im wrong..

tried b4..noteook hardware controller cant control if ur lappy punya power option at control panel canot control...NHC is jst making a simple and user friendly interface for it's user.

u mind to try? do u have amd power monitor? try open up amd power monitor, then set at control paner--->power option-->portable laptop.....see the proc frequency fix at 800 or not...ofcoz when u test, dun open NHC.

how come compaq one got freedos then got vista one?

This post has been edited by jediknight7sam: Apr 18 2008, 11:30 AM

i know....NHC got nothing to do with this actually...if ur chipset driver or proc driver supports(im not sure which one. thats why im asking), then no need nhc u also can change the proc speed using control panel-->power option....if u know what i mean...

can i know where u download ur chipset driver from and the driver version? i think my version doesnt support..

i suggest u turn of nhc and use only MD power monitor to control and see can or not..

This post has been edited by jediknight7sam: Apr 18 2008, 05:17 PM

i dun think is OS problem..lastime my lappy canot...only set at 1.8GHZ full speed..canot even dynamic switching..but then after i get my lappy back from HP SC, can set everything..very happy...i tot update bios can liao...but then after i format, can only dynamic switching no mather what power option profile i set..so weird...

i reckon is a driver problem, not sure is chipset driver or proc driver..

ok...can u send me ur chipset driver and proc driver? i also got from the shop....

what is 5S?


by the way guys..i use RM clock to set it...abit trouble and dangerous....wrong voltage or wrong frequency to ur proc then will get BSOD liao...haha..i kena few times d..hhha...kinda fun though..haha

coz u were comparing XP and Vista ma..mind to clarify?

freedos mean no OS in ur lappy lo...cost rm 400? no la, use ah hem ah hem lo...

for the time being, i dun advice ppl to use vista yet...unless u do dual boot for vista testing purpose...

around 2 hours lo....

i see...that's why i say, it's not because of OS, i think is the driver problem...b4 format can, after format canot liao..

support what siuyi?

thats why i wan to caompare the driver version...so many chipset version make me confused..

what kinda patch? patch to enable us to set 800Mhz only, jump from 800Mhz to full speed and set at only full speed only? I've download some patch from AMD site but now my proc only can set 1.8Ghz only and jump around....canot set only 800Mhz..how rr?

normal for vista and XP about LAN...still need to wait Windows to figure out this problem...

Mobo burn maybe...lots of case happen liao....b4 ur problem come...have u check ur GPU heat b4?

bingo...now we see the problem...you should monitor ur GPU heat...that's the culprit...from what i heard from forumer here is...GPU too hot and burn off some components on the mobo that caused that...so u might wan to send back to service center for a new mobo...nothing to do with RAM nor HDD.

I understand ur point, infact, i do...

but my point here is...i want my proc to be able to set it to use 800Mhz only...now my proc is running like u said, power down when idle and power up when load more stuffs...im using xp by the way, and last time i cant set it to only 800mhz after i get my lappy back from service center,(duno what the engineer did to my lappy).....so now after i format, i cant set it anymore. so i suspect it's a software problem, not har5dware, coz hardware definitely support...

i already install that 1.3.2.0053 already still no effect...please help

yes...i want to monitor my heat...when it's too hot, i wan my proc to run at 800mhz only, not more than that....means full load also will set at 800mhz....thanks by the way..=)

how u set to power saver? balanced and high performance?

thanks man...
i tried b4, but using RM CLOCK....this kinda software kinda risky because we under volt it and underclock sometimes without following what is supposed to...i use rm clock to do the job but if once a small wrong setting will get u to BSOD....
happend few times liao..hahahah..

im looking for a proc driver or something like chipset driver to enable our own XP control panel power option to set it to 800mhz by only set the option to Portable'laptop...after get my lappy back from hp service center i can do the setting, duno what the engineer did to my laptop...i call him back he said he change MOBO and update bios only...i see my bios also latest now after i format my lappy....but now canot set the proc speed like i can set at power option ady...

any solution?

u have the same problem with me...my heat also like urs..

but im kinda surprise to hear that HP also got this problem...i tot the air ventilation is better than compact...

then i bet it must be the Geforce 6150's fault ady...im using V3415AU by the way...

i tried to underclock my GC as well, but so far still no progress...like 6150 already set not for ppl to overclock...

i used rivatuner, ntune, nv tray, some registry modding all canot..i also duno why...im blaming 6150 now....who can help us?