Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

TIME [OFFICIAL] TIME Fibre Broadband™ v3.o, 500 Mbps of rocket science

views
     
mavric
post Apr 6 2016, 10:39 PM

Getting Started
**
Junior Member
104 posts

Joined: Oct 2007


Hi guys,

Need some advice. I've been on Time for the past 2 years. It was 8Mbps when I first signed up with the 24 month contract. Then upgraded automatically to 10Mbps and recently got the email of another upgrade to 100Mbps. Naturally I was quite excited when I saw that email from Time.

But my joy was short lived. My modem and router is in the hall right next to my living room, literally 2 feet away from my sofa without any walls etc. blocking or interfering with the signal.

When I am on Wifi and I run Speedtest, the result is around 30 - 40Mbps for download and upload speed respectively. However, when I plug in my LAN cable, it can hit up to 80++ Mbps for upload and download.

Modem: Huawei HG8240
Router: Linksys E1200

Both were given to me 2 years ago when I signed up wit Time.

Any advice? Suggestions?

Thanks in advance.
mavric
post Apr 6 2016, 11:40 PM

Getting Started
**
Junior Member
104 posts

Joined: Oct 2007


QUOTE(TXSim @ Apr 6 2016, 11:05 PM)
Wi-Fi Router is the issue. Can't achieve full speed.
*
Hmm but the Linksys E1200 is a Wireless N Router capable of up to 300Mbps. At least that's what it claims on the box and in Linksys website.


mavric
post Apr 7 2016, 12:59 AM

Getting Started
**
Junior Member
104 posts

Joined: Oct 2007


QUOTE(ezinger @ Apr 7 2016, 12:07 AM)

*
so what's the best router in the market now that could easily hit 100Mbps?
suggestions are welcome rclxms.gif
mavric
post Apr 10 2016, 01:14 PM

Getting Started
**
Junior Member
104 posts

Joined: Oct 2007


QUOTE(infin @ Apr 7 2016, 09:17 AM)
Wifi signals will vary wildly depending on the wall configuration of your place. There will be sweet spots where you can achieve high wifi bandwidth but also black holes where the signal is weakest.

However, the biggest negative impact on the quality of your wifi signal is this -  all the other wifi routers/access point around you. In condos, that means that both your wifi router and PC/devices will have to fight with X number of other wifi devices for the same range of radio signals, worse still if your wifi router doesn't have a good algorithm to dynamically change wifi channels so that it doesn't conflict with other wifi users. In a condo environment it is like a very loud restaurant/club - everyone is shouting to be heard over everyone else and you can't really hear what the people at your table are saying...

What you can try to do is to find out what channels other wifi routers are using and configure your wifi router to a channel that isn't used or one that provides you with the best signal strength.

Otherwise look into triple/quad band wifi AC routers but keep in mind that your PC and devices must also be able to speak the same language and be AC and triple/quad band compatible. For PCs, this means adding a Wifi dongle that matches the spec.
*
QUOTE(ezinger @ Apr 7 2016, 10:34 AM)
Most AC1200 routers can easily get 100 Mbps throughput but it still depends on your wireless environment.

user posted image
*
My router placement in my condo is just 1 feet away from where my sofa is so pretty sure that's the sweetest spot in the house smile.gif Tried fidgeting with the channels, upgraded to the latest firmware available, reset and reconfigured the router but the results are the same. On the current Time 100Mbps line, I am only able to achieve around 40+Mbps on wifi but can hit 80-90+ Mbps on LAN. Since the fibre was pulled all the way to my modem and not the last-mile-copper types, that rules out any cabling issues considering my speed on LAN is very much acceptable.

Of course I tried my luck emailing Time Support and complained about the Linksys E1200 router they gave me 2 years ago. Here's their response:

"Please be inform that the given Cisco Linksys E1200 router is run on 2.4Ghz radio frequency band which can support up to 40Mbps on WiFi. We regret to inform that we do not offer any router replacement. You may purchase the dual band router on your own or purchase the router from TIME through our selfcare portal."

So all things considered, does this mean I really need to get a new router to hit the promised land of 100Mbps and stop flogging the old E1200?

Checked the official link here: http://www.linksys.com/my/p/P-E1200/

Still find it hard to accept the E1200 can only support up to 40Mbps on WiFi.





mavric
post Apr 11 2016, 03:35 PM

Getting Started
**
Junior Member
104 posts

Joined: Oct 2007


QUOTE(ezinger @ Apr 11 2016, 09:40 AM)
The E1200 doesn't even have a gigabit port. I think it's safe to say that a minimum of a dual band router would easily let you reach 100 Mbps on LAN and possible around the same on WiFi.
*
QUOTE(jjj2 @ Apr 11 2016, 10:54 AM)
Hi Mavric,

Don't waste time with E1200, its hardware barrier just won't let you increase your performance..

Try to purchase a Router either from the Selfcare Portal or from outside computer store... make sure its Gigabit WAN/LAN. For current & upcoming bandwidth optimization concerns, get at least an AC1200 Router.
At the same time, make sure your receiving devices (Eg. Laptop, Mobiles, Tablets etc) all are able to support at least Dual Band, better if it supports Wifi 802.11AC.

If you need Router placement advise for your unit, kindly buzz me.

Thanks.
*
Hey guys,

I'm gonna replace the E1200 with this: https://www.asus.com/Networking/RTAC68U/specifications/
The AC68U has rave reviews from what I read. Anyone got hands-on real life experience with it?

Right now I have 2 laptops at home, both have WLAN a/b/g/n
One more new laptop coming soon, with dual band WLAN ac.
Both mobile phones already have WLAN a/b/g/n/ac.

This morning slept at 4am for one final round of tweaking on the E1200.
On LAN, hitting 80+ to 90 Mbps no problem on the E1200. Very acceptable since ISP gives me 100Mpbs.
On WLAN, 30+ to 40+ Mbps only. Unacceptable. So I will welcome AC68U real soon.




mavric
post Apr 11 2016, 07:01 PM

Getting Started
**
Junior Member
104 posts

Joined: Oct 2007


QUOTE(jjj2 @ Apr 11 2016, 06:21 PM)
Hi Mavric,
We've tested this unit as Router, AP, Repeater Mode...all functioning fantastically well. Unless your unit is over 2,000 sq ft and multi storey, if for a 1000--1300 sq ft condo, this unit is a bit overkill.

Just like party Bor said, unless you planning for future upgrade.

Else try go for lower end model such as AC66U.

Thanks.
*
Thanks for the advice bro. Apparently it is a bit of a challenge to source for AC66U. Went to a few shops but they only have AC68U. I believe 100Mbps is just the start, I guess I'll go for AC68U with an eye for future upgrade.



QUOTE(RagingCandy @ Apr 11 2016, 06:08 PM)
Have u try to tweak ur wireless adapter?
http://www.intel.com/content/www/us/en/sup.../000005544.html

I manage to get around 90Mbps with my 4 years old laptop (intel centrino Wireless N1000) with 4 years old router (netgear WPN824N)
*
I've tweaked my receiver settings.

You can easily check all the radio types that is turned on on your laptop/desktop:

Load the 'cmd' shell. Then 'netsh wlan show drivers'


mavric
post Apr 11 2016, 07:52 PM

Getting Started
**
Junior Member
104 posts

Joined: Oct 2007


QUOTE(PsychoJoe @ Apr 11 2016, 07:43 PM)
If it helps, I saw some AC66U @ Viewnet Lowyat.
*
where exactly is viewnet in lowyat?
mavric
post Apr 11 2016, 07:53 PM

Getting Started
**
Junior Member
104 posts

Joined: Oct 2007


QUOTE(PsychoJoe @ Apr 11 2016, 07:43 PM)
If it helps, I saw some AC66U @ Viewnet Lowyat.
*
where exactly is viewnet in lowyat?

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0265sec    0.42    7 queries    GZIP Disabled
Time is now: 29th November 2025 - 07:12 AM