hi guys.. i am looking for cuboid 150w... is anyone selling? pm me pls.. thanks 

Thanks for the info....i also got 1pc HG2 fake battery. Shows battery weak on 8A @ 50% battery....i throw away already
But if buy battery online how to check? Lot of online seller says their battery is 100% original.......worry when get it....100% fake . Thats why i worry buy battery online. Anyone here know who sell 100% ori battery online? Most of the vape shop also sell fake battery also. I also experience b4......same case....show battery weak when fire above 8A. Very hard to buy an original battery nowaday.

XTAR stuff FTW. For a 4-slotter the VC4 is nice, though it doesn't use microUSB cables like the VC2/MC2/MC1/MC0 (so no ready spares).
Thanks for the guide. Personally I already felt something was off when the HG2s/browns practically flooded the market since last month (both expos got LG browns by the boatloads)... and then Abam Mooch from ECF posted his finding, which I reposted over here some time ago.

For me looking at the top insulator (glossy = fake, matte = ori) is enough 90% of the time, though apparently it's only a matter of time before counterfeiters get that right too.

I personally prefer Sammy 25R5s (or 30Qs, but I've yet to see anybody stocking those) to LG batts though, so it's less of an issue for me.

Have a link to the Xtar VC4 you bought?

What about Nitecore i4/d4? It's almost half the price of the Xtar VC4

Found this dude selling Xtar on LYN
https://forum.lowyat.net/index.php?showtopic=2970982&hl=

I see the Xtar VC4 or MC2 doesn't come with a wall adapter.

Do you plug yours into your laptop USB?

his one of the owner right? if its true they are selling fake but sell ori price .. this is unacceptable .. somemore switch with juice only .. he should investigate this either his shop purposely selling this type of product or his staff there doing it themself ..

somemore .. to compensate u with juice is not right ..  he should give u more

Fake from Vapor Hub
My pictures from the tank they gave me:

Here you can see the rubber part(i think its call an insulator) sticking out under the build post and also at the back you can see the top cover with the engraving Avocado which on the V its half faded and grayish . The authentic one is not supposed to be even colored.
Here is the picture of the SS version engraving from RIP TRIPPERS review.

The engraving follows the color of the base which is either silver or black as shown below in the authentic black version i bought.


Here is the picture another forum member markypcs who was cheated as well just sent me a picture of his clone black version from Vapor Hub.

As you can see his engraving is grayish. Also in the picture above you can see the tank is with a clear glass. All the authentic ones come fitted with frosted glass and the clear glass tank is where the extra accessories are at.

The easiest give away is if you look at the first picture, you see the screw holding the fill hole hinge on the clone is gold and the original ones(SS or Black) comes with silver screws only as shown below:

Here is a picture showing the color of my authentic avocado black fill hinge screw.

Also in the picture above you can agak agak see the insulator and how good the workmanship is on the authentic one.

In the picture below you can see a stone chip in between two of the o rings due to poor workmanship of this clone.

Also can you spot a screw missing on the top post? The screw basically just fell off when i opened the tank brand new from the box and was sitting on the build deck.

Other giveaways of the clone:
- The biggest dead giveaway is the clone, you are able to pull the most upper part(the part that controls the air hole) out. I tried pull the top part out of my authentic one and from looking underneath, i can confidently say that the top and middle parts are joined together and there is no way to pull it out. In case you don't get what i mean, the picture below is an illustration of the part i was able to pull apart.

- Both tanks were clear instead of one being frosted.
- The ceramic block inside(if you decide to use single coil) is supposed to have 2 o-rings on both its legs but the clone came with only 1 o-ring on one leg for the block. The spare one also had only one o-ring.
- Very hard to pull out the liquid hole hinge cover.
- In between the liquid hole hinge and the fill hole, there is suppose to be a plastic cover which the clone does not have.
- The packaging part where on the front it writes Geek Vape, easy to build etc. That paper on the authentic one is really thin like an a4 paper. The fake one from Vapor Hub was hard like a higher gsm paper.
I hope this helps you distinguish between the clone and original one.

Sometimes I stop vaping because juice taste Tak sedap.
How long can the juice last once we open the bottle?
Me using Provari with kayfun v4. What is the best setting ? I'm running 1.5ohm with 4.4 volt.
Izzit too much or too low ?

de bubu vapor, selling cheap liquid.. legit item?