hi all..just wanna ask some noob questions...do i have to chage my ram to high performance ram for running higher frequency..currently my ram just running at 133Mhz only...quite slow while opening explorer...some opinion.. tq..

oic...if wanna run the rams at 200MHz just change at bios only aaa?? ic... i will look at the bios la later....thanks for the info..

sorry...i think my ram runs at 166MHz...the FSB is at 133MHz....actually how to know my mobo have oc setting...i have to look at bios is the ram timing can be change manually or not aaa?? err...if have oc setting...i just change the ram timing to 3 3 3 8 to run my ram at 200MHz..am i rite?? i have read some posting about ocing...but just got confused....all i wanna do is just run my ram at 200MHz..i think i will more quicker to load programs even the windows explorer... ...so.. if i change my ram timing ... does it will effect others stuff?? does the temperature will rise so high??



This post has been edited by sang_karim: Feb 16 2007, 10:42 PM

mine better than yours aaa?? i see ur proc is 2.4GHz also...different aa?? hmm..i think i'll gonna do some reading first to understand this...then u can help to guide me aaa?? hehe...i'll pm u if i have question...can aa? gonna leave my pc this weekends..maybe i'll try after CNY...anyway...thanks for ur guide...really appreciate it...

err....one question...after i change the FSB to 166MHz....what software should i use to determine if my system is stable or not?

errr...does my mobo support P4 3GHz?? coz my bro's mobo oredi dead...so i'm thinking to swap my 2.4GHz wit his 3GHz....anybody knows??

like that aaa?? how to know my mobo can support 800FSB?? right now its only 533FSB ....any help??

"2.8GHz Prescott CPU and Intel Hyper-Threading technology support
Leveraging the Intel 845GE chipset to support Intel Hyper-Threading up to 2.8GHz P4 Prescott CPUs on 533MHz FSB, DDR333 memory, the P4GE-MX delivers a full-value, high-performance solution for today's most demanding tasks."

Does that mean my P4GE-MX can only support up to 2.8GHz only??

hehe...mt bro want to sell the 3GHz proc tu his friend la...so i will try to oc my pc la...on things....now my cpu temperature is about 70C..if oc....will the temperature rise?? what is the max temperature for the cpu to running in stable condition?

at first it can reach 84C while i'm surfing a lot....now i just clean the heatsink and the fan....err....usually....after u take off the heatsink and want to attach it back...must apply new thermal paste ka??

aiseh....i have to aplly the thermal paste aa...i'll find it and get it done by tomorrow la...rite now the temperature between 50C - 55C..it's quite low than before.. i'm gonna search the article about applying thermal paste....i've seen before sumwhere in this forum...need some kertas pasir to gosok the heatsink and proc rite before applying it....wahh...so dangerous la me...

hehe..i just wanna ask that question...tq for the information....so..no need to lapping aa ... just clean the older one from the processor and heatsink...and then just apply the new thermal paste.. just like that?? just saw a few cool heatsink and looks so tempting.. hehe...maybe one day i'll change to the real heatsink..... rite now my CPU temp around 51C ...... still ok rite??? *with side panel open...

This post has been edited by sang_karim: Feb 28 2007, 12:06 AM

hehe..just bought the cooler master thermal compound....gonna apply it after work later....errr..how much to put on the proc?? now i know why rainingzero still got the paste after 1.5 years...hehe...maybe i'm gonna clean my heatsink frequently la....maybe once every month to get my thermal paste finish quickly...hehe..

ooo...the paste is put under the heatsink aaa?? not on the proc??? i tot put on the proc...then put the heatsink...

aiya....silly me....how can i be so noob....

---

Added on February 28, 2007, 6:48 pmsomebody..help me...i just applying thermal paste to my proc and heat sink... after get it done...i want to start my pc as usual...then windows can't load... at monitor appear "Power Saving Mode" ... usually my friend told me to take of the power cable from psu to mobo and then put it back...i have done it and still the same...anybody knows why??

This post has been edited by sang_karim: Feb 28 2007, 06:53 PM

now i'm back into bussiness...hehe...just take off the proc and heatsink...it was ok...sit on the rite place...so i just repaste it back...take of couple of cable and reattach it back....wallah.... now i'm back.....my current cpu temp is 44C rite now dunno how to describe the idle and full load temperature....now i can start to oc my presshot...

guys...i just try to oc my presshot....i change the cpu clock to 154 but at cpuz shows my FSB at 160 ... i dunno why....i think this is the stable setting for now as it don restart again ... dunno la wether it will restart if i left my pc later...wanna run prime95 .. then i dunno how to use super pi...anyone care to tell??? ....this is my screenie.... any comments are wellcome....very2 noob in ocing.... hehe.. tq...



*Just run the SP2004 for few minutes already beeping...hehe...i got panic, click the stop button and windows got restart.... hehe now the FSB was rite.... at 153.2 Mhz .. so...what should i do now?? need to run more test??

This post has been edited by sang_karim: Mar 1 2007, 12:59 AM

err..what BSOD bro??? at first....before i'm running sp2004...i don restart for about 45 minute ... then when i run sp2004 ... i go to toilet for a while...then red sign with stop appear...so i click stop and then windows restart ... so.. what's ur suggestion?? have to lower my cpu clock??

rite now i'm still running sp2004...it just running for 1 hour...proc running at 2663Mhz and FSB at 148Mhz ... gonna wait n see if this is the stable condition ...

*aiyakk....the stop sign come again...gonna low the FSB again...

This post has been edited by sang_karim: Mar 1 2007, 09:25 PM

oic...maybe la...i'm just using KVR with PCS chipset...dunno what brand of the PSU but at my receipt stated 480W .... flunctuate?? what is that aaa?? u mean keep changing aaa?? don't notice plak...maybe i check it later la... wanna sleep ler... here the fail screenie...



any comments and suggestions really appreciated...