Outline ·
[ Standard ] ·
Linear+
[V29] Lowyat.Net Mechanical Keyboard Club
|
quadcube
|
 Mar 30 2016, 11:34 PM
|
|
QUOTE(justordinary @ Mar 30 2016, 10:16 PM) So i have a half assembled board sitting here for centuries so i figured it's time i get that shit done. I just ordered the switches from taobao and I assume it will take 1-2 weeks to arrive. Anyone offering soldering service here? 87 switches + 87 leds + lubing/tuning stabs. I'll provide everything necessary except the lube. Please help a brother out and pm me your best rate! 1 buck per (key+led)?  i don't know how to tune through |
|
|
|
|
|
quadcube
|
Apr 8 2016, 04:51 PM
|
|
|
QUOTE(richard912 @ Apr 8 2016, 04:10 PM) Bah! One of the LED (F-10 key) has failed and another (S key) is failing, getting dimmer on my one-month old CM QFR-i. Looks like I will have to send in for RMA, which now gives me a reason to buy another MKB since I don't have a spare KB. Under consideration are the following: 1. Corsair K65 - love the floating key design, come with RGB 2. Ducky One TKL with backlight - design very similar to the QFR-i though 3. Wait for CM MasterKeys Pro S - supposed to become available from May (next month) As you can see, TKL and backlight (RGB not really a requisite) are what I'm looking for, with Red switch or equivalent. Any thoughts or suggestions or recommendations? Custom |
|
|
|
|
|
quadcube
|
Apr 8 2016, 06:36 PM
|
|
|
QUOTE(joyformidable @ Apr 8 2016, 06:30 PM) anyone here up for a meetup in Selangor to discuss and try keyboards ?? im just giving a try here seen there have been so many on reddit and i've only seen it done here like once like so long ago, so lazy to browse through the thread Tomorrow  |
|
|
|
|
|
quadcube
|
Apr 8 2016, 07:48 PM
|
|
|
QUOTE(joyformidable @ Apr 8 2016, 06:42 PM) Haha,I only have one board  This post has been edited by quadcube: Apr 8 2016, 07:49 PM |
|
|
|
|
|
quadcube
|
Apr 8 2016, 10:52 PM
|
|
|
QUOTE(quovadis123 @ Apr 8 2016, 08:19 PM) Your idea is good. Any enthusiast joining ?  When?  inb4, yuktsi14 |
|
|
|
|
|
quadcube
|
Apr 10 2016, 11:15 PM
|
|
|
QUOTE(Rainings @ Apr 10 2016, 06:29 PM) hi guys, any recommended mechanical keybaord for programmer? recently saw this split keyboard looks cool Matias Ergo Pro. Any requirement? Programmer here,just using plain Filco TKL |
|
|
|
|
|
quadcube
|
Apr 11 2016, 12:39 AM
|
|
|
QUOTE(Rainings @ Apr 11 2016, 12:26 AM) i actually prefer a keyboard with big palm rest, quiet and ergonormic. how much is Filco TKL? any feedback and comment? Hmm...no idea about ergonomic but the Filco is just a normal keyboard,I bought it for rm415. So far so good,solid,no complains about it |
|
|
|
|
|
quadcube
|
Apr 11 2016, 01:07 AM
|
|
|
QUOTE(Rainings @ Apr 11 2016, 12:59 AM) Do you get Filco from Malaysia? what so special about this keyboard? the ergonomic is very subjective haha.... but perhaps a design like this or split keyboard that i can adjust by my own.  I think I got it from Czone in lowyat plaza..u mean what's special about the Filco?nothing special but yea,it's what you would expect out of a keyboard,no fancy stuff,just plain enjoyment of typing on mechanical switches |
|
|
|
|
|
quadcube
|
Apr 16 2016, 10:55 PM
|
|
|
QUOTE(justnits @ Apr 16 2016, 10:07 AM) blues are good mang. i like them so much until i like my linear switch with mx blue's spring. the clicky feel and sound is the one that makes me on form when typing lol! About to switch from blue to brown oh god....change flavor although I'm still in love with the blue |
|
|
|
|
|
quadcube
|
Apr 21 2016, 10:47 AM
|
|
|
QUOTE(irsyadfy @ Apr 20 2016, 07:00 PM) Masta, i have a few question. 1. what is the function of a controller? from what i read it's where u program ur keys(something like dat) hence some ppl change it/custom kb. i cant find any link directly explaining this so im asking here. 2. cant reprogram the stock one? and if u change, the upside is can make any key to become any key is it? controller just read the keyboard matrix and depend on the programmed firmware,it will send the scan code theu PS/2 or USB to the computer it depends on the firmware of the custom controller,if it's like winkeyless,you can program any key any where,and you can also program plenty of macro thru their GUI |
|
|
|
|
|
quadcube
|
Apr 23 2016, 01:57 AM
|
|
|
QUOTE(-Hzu- @ Apr 22 2016, 07:02 PM) By the way, did anyone bought the Hana DSA set on Massdrop? I think it looks so beautiful but I'm broke. I'm just asking because I'd love to see some photos of it from any of you here that bought it lol (maybe in a few months, or even years).  Wow...that thing is a beauty! |
|
|
|
|
|
quadcube
|
Apr 25 2016, 12:31 AM
|
|
|
QUOTE(iamkroll @ Apr 24 2016, 03:44 PM) Hi guys, I've got a Filco Minila Air (Bluetooth) keyboard and somehow it wouldn't switch on. I think it might just be a simple ON/OFF switch issue but I'm not an electrical engineer so I might be wrong. I need to get it fixed. Any of you here know where I can send it for repair? Preferably somewhere in Damansara area. Any kind of help is appreciated. Thanks! Battery dead? |
|
|
|
|
|
quadcube
|
Apr 27 2016, 08:11 PM
|
|
|
QUOTE(iamkroll @ Apr 27 2016, 07:26 PM) No lar, i changed to new batteries alrdy. Some more use energizer. Still wouldn't turn on. U know any shop that can at least check it out/troubleshoot? Hmm...weird.although I'm from damansara area,but am currently in KK,can help u check if I got free time and of course I only want the circuit board without casing and keycap (bad experience fixing keyboards,unhygienic users) |
|
|
|
|
|
quadcube
|
Apr 27 2016, 08:35 PM
|
|
|
QUOTE(iamkroll @ Apr 27 2016, 08:32 PM) Oh would you be able to take a look? That's nice of you. You can quote me a repair price if you are able to fix it. Orang Sabah rupanya. Boleh bah kalau kau!  Yea,I'll see if it's fixable or not since I have all the tools here  I'm not a sabahan but I love Sabah  |
|
|
|
|
|
quadcube
|
Apr 27 2016, 10:05 PM
|
|
|
QUOTE(iamkroll @ Apr 27 2016, 08:59 PM) Let me know when you'll be back in KL/Damansara. I'll pass you the KB then  then u might need to wait quite long if it's not urgent then it's fine |
|
|
|
|
|
quadcube
|
Apr 28 2016, 12:37 PM
|
|
|
QUOTE(jinglohenglo @ Apr 28 2016, 09:38 AM) Hi there! I'm planning on assembling my own custom keyboard and would need some general advice on soldering stations and the solder. 1) Where can I find soldering stations such as the Hakko 888 or Weller WES51 in Malaysia? (I'm based in Subang Jaya, Selangor) 2) What are the recommended solders (rosin/leaded) that I should get and subsequently, where can I get them? Your help will be very much appreciated! 1) jalan pasar 2) just get 60/40 one and for flux, try get those no clean flux,or not u have to buy flux cleaner (IPA,thinner...don't use thinner unless no choice la) This post has been edited by quadcube: Apr 28 2016, 12:38 PM |
|
|
|
|
|
quadcube
|
May 10 2016, 10:14 AM
|
|
|
QUOTE(bdhoel @ May 10 2016, 10:13 AM) anyone know where to buy zealio switches? lot of ppl seem to like that switch so i want to try bymyself I tried it,the purple switch looks real nice but feel is kinda meh |
|
|
|
|
|
quadcube
|
May 10 2016, 10:19 AM
|
|
|
QUOTE(bdhoel @ May 10 2016, 10:18 AM) have you try cherry mx clear? I read review those switches are basically same feeling when you type. is that true? Tried both,but not side by side I like the clear one |
|
|
|
|
|
quadcube
|
May 10 2016, 10:50 AM
|
|
|
QUOTE(bdhoel @ May 10 2016, 10:23 AM) any idea where to buy mx clear/ zealio switches? Clear can get from taobao,for zealio,not too sure |
|
|
|
|
|
quadcube
|
May 11 2016, 01:03 AM
|
|
|
QUOTE(kahtsin @ May 11 2016, 12:33 AM) Apparently, I can't type the 'tilde' key with my Ducky Shine 5. The 'grave' key is okay, but ¬ comes out whenever I tried to type the 'tilde' key. ~ <-- this is the tilde key U typing on what OS?linux?because I know my keyboard won't work correctly with Linux la |
|
|
|
|
Quote
0.0764sec
0.26
7 queries
GZIP Disabled