New speaker - C3 available soon




A very high performance, separate amplifier component system
'blue-halo' digital volume control with separate bass and treble control provides the power to drive a massive wooden enclosure 8" subwoofer and 2-way satellites speaker.
A wireless remote control allows the entire system to be easily operated in a home or desktop environment
E.I.D.C.
Feature
Acoustics:
. 8' subwoofer driver; vented housing with port on back wall;
. 2-way satellite with 3' mid-range, and 3/4' tweeter unit with silk diaphragm;
. Complete wooden structure for all speakers; 12mm MDF for sub and 9mm MDF for satellites;
. Passive speakers with external amplifier
Electrical:
General:
1. Revolutionary voltage regulator circuitry to enable high VS for amplifiers and get best of the chips;
2. Digital volume controller
3. MCU for master volume, EQ control
4. Power output: RMS 2 x 9W + 25W
Inputs:
1. RCA inputs for PC on back of external amplifier;
2. 3.5mm auxiliary inputs with higher sensitivity on both front panel and back panel of external amplifier
3. Key control switches between the two inputs; input indicators on front panel of amplifier are lit accordingly (same as C2)
Outputs:
. Speaker outputs on back panel of external amplifier, wire clippers;
. Headphone outputs on front panel of external amplifier; higher priority than speaker outputs;
Controls:
. Master volume control on front panel of amplifier;
. Input selector, "Function" (navigate recursively between master volume adjustment, treble adjustment and bass adjustment), and STBY/ON
control available on front panel of amplifier (similar to C2);
. Master volume ranges from 0 to 60, and bass/treble trimmer ranges from -9 to +9, 1 on each step;
. Power On/Off switch available on back panel of amplifier;
. IR remote controller with STBY/ON, master volume control, bass/treble trimmer, input selector.
This post has been edited by Edifier: Oct 18 2007, 11:16 AM