Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Project: RESURGENCE - Caselabs Magnum STH-10, FINAL UPDATE, DONE!

views
     
TSKiriKaniathran
post Feb 26 2016, 02:21 PM, updated 8y ago

Getting Started
**
Junior Member
80 posts

Joined: Dec 2014
From: Kuala Lumpur, Malaysia




user posted image

user posted image

PROJECT: RESURGENCE
DESIGNED & BUILT BY EMARQUE™

www.emarque.co

Resurgence was the name given to this build which defines as the rise after a long period of time.
Throughout this build, you will see the attention to detail and the passion involved as well,
how every single detail in this build matters.

The main focus on this build is to showcase the amazing Aquacomputer products involved.
Liquid cooling made and manufactured in Germany with perfection.

Our supportive client was really happy to proceed on this project with us and we will be updating
this thread as often as possible after each progress.

SPECIFICATIONS

- Intel Core i7 5820K
- ASUS Republic of Gamers Rampage V Extreme
- Corsair Dominator Platinum 16GB ( 4 X 4) DDR4 RAM
- Sapphire AMD R9 Fury X 4GB HBM
- Sapphire AMD R9 Fury X 4GB HBM
- Samsung 950 Pro 512 GB M.2 SSD
- Samsung 850 Pro 512 GB SSD
- Samsung 850 Pro 512 GB SSD
- Samsung 850 EVO 1TB SSD
- Corsair AX1500i +80 Platinum Fully Modular PSU

- CableMod C-Series AXi, HXi & RM Cable Kit - BLACK / RED
- Revoluzion Technologia Sleeved Data Cables Black & Red
- Revoluzion Technologia Cable Combs for CPU/MOBO/PCIE
- I/O Connectors, Fan & Pump Wires Sleeved using Revoluzion Technologia PET Sleeves

LIQUID COOLING PARTS & ACCESSORIES

It would just take up too much space so I've placed it in a spoiler.
There will be minor changes during the duration in this build.

» Click to show Spoiler - click again to hide... «

In all its glory,

CASELABS MAGNUM STH-10
w/accessories and radiator mounting brackets.
Will update this in detail later on as well.



This post has been edited by KiriKaniathran: Apr 21 2016, 02:39 PM
TSKiriKaniathran
post Feb 26 2016, 02:22 PM

Getting Started
**
Junior Member
80 posts

Joined: Dec 2014
From: Kuala Lumpur, Malaysia




PARTS ARRIVAL AND COMPONENT INSTALLATION

user posted image

As promised, the beast has arrived.

user posted image

The heart and motherboard for this build, Intel Core i7 5820K and the not so unfamiliar ASUS ROG Rampage V Extreme X99 Motherboard.

user posted image

A closer look at the Intel Core i7 5820K.

user posted image

Putting the heart and brains to the body



This post has been edited by KiriKaniathran: Mar 6 2016, 11:03 AM
TSKiriKaniathran
post Feb 26 2016, 02:23 PM

Getting Started
**
Junior Member
80 posts

Joined: Dec 2014
From: Kuala Lumpur, Malaysia





user posted image

Close up nudes of the sexy body.

I've placed more in a spoiler so that I don't bore you guys who already know how awesome this motherboard looks already.

» Click to show Spoiler - click again to hide... «


user posted image

For the memory, we have the Corsair Dominator Platinum 16GB 2666MHz RAM. They come in 4 pieces in the kit.

user posted image

Unboxed those sexy rams.

user posted image

Placed them into the appropriate slots. Nothing hard here.
They look good though.

user posted image

user posted image

Closer look at those RAMs



This post has been edited by KiriKaniathran: Mar 6 2016, 11:08 AM
TSKiriKaniathran
post Feb 26 2016, 02:24 PM

Getting Started
**
Junior Member
80 posts

Joined: Dec 2014
From: Kuala Lumpur, Malaysia





user posted image

Oh I nearly forgot, the ROG OC panel. We'll be using that later on.

user posted image

The removable motherboard tray makes it even more easier to install the motherboard and PCIE components.

user posted image

A closer look at the removable motherboard tray. Screw holes are all in place.

user posted image

Aligning the motherboard and checking whether the screw holes are accurately in place.

Yes, I know I forgot the IO shield but this was just to check.
Will update even more later today.

Thanks guys.



This post has been edited by KiriKaniathran: Mar 6 2016, 11:12 AM
digitalshop
post Feb 26 2016, 02:33 PM

Getting Started
**
Junior Member
103 posts

Joined: Aug 2015
wow, excited to see what coming next for this build! moar pic!!!!!!!!! huhu
TSKiriKaniathran
post Feb 26 2016, 02:57 PM

Getting Started
**
Junior Member
80 posts

Joined: Dec 2014
From: Kuala Lumpur, Malaysia



QUOTE(digitalshop @ Feb 26 2016, 02:33 PM)
wow, excited to see what coming next for this build! moar pic!!!!!!!!! huhu
*
patience young padawan hehe
digitalshop
post Feb 26 2016, 03:10 PM

Getting Started
**
Junior Member
103 posts

Joined: Aug 2015
i will master! HAHA
digitalshop
post Feb 28 2016, 04:10 PM

Getting Started
**
Junior Member
103 posts

Joined: Aug 2015
do caselab have any good itx casE? haha
TSKiriKaniathran
post Feb 28 2016, 04:40 PM

Getting Started
**
Junior Member
80 posts

Joined: Dec 2014
From: Kuala Lumpur, Malaysia



QUOTE(digitalshop @ Feb 28 2016, 04:10 PM)
do caselab have any good itx casE? haha
*
Not so sure bro, I think this one is the smallest on sale at the moment
Mercury S5
TSKiriKaniathran
post Feb 28 2016, 04:52 PM

Getting Started
**
Junior Member
80 posts

Joined: Dec 2014
From: Kuala Lumpur, Malaysia





user posted image

Installed the BeQuiet Pure Wings 2 fans and slotted the motherboard tray back into its place.
These fans are amazing even for Aquacomputer radiators, super silent and high airflow.

user posted image

Installed the D5 pump using the Bitspower D5 Mod kit.
Measured, marked the holes using a pencil and drilled those holes to mount the D5 combo.

The kit is consists of the following:
- Bitspower D5 Pump Top(Acrylic)
- Bitspower D5 Pump Cover
- Bitspower Mounting Kit

user posted image

This kit is really useful and secure when mounted - there's also a rubber pad on each of the mounting kit to absorb any vibrations from the D5 pump
during running conditions. The D5 pump wires will be sleeved later on.

user posted image

Another shot of it from this angle. Looks pretty good.. Loving the acrylic D5 top.

user posted image

For the reservoirs, we'll be using the Bitspower Water Tank Z-Multi 250MM Cylindrical Tank Reservoir.
Here's a shot of them after being washed.

user posted image

Only mounted one of the reservoirs as I only had one extra male-male adapter. Waiting for Barrow fittings to arrive later this week.

user posted image

The primary and one of the SSD's in this build, the Samsung 950 Pro 512GB NVME M.2 SSD.
With a sequential read of up to 2,500 MB/sec, it was hard to resist choosing it as the main drive in this build.
This unit was specially ordered since no one here in Malaysia keeps stock for this.
After hearing that the read/write speeds thermal throttles after a few minutes of transfer, we planned to cool this bad boy by custom mounting a 40MM fan right beside it later on.

user posted image

Thanks again for viewing guys, hope to update you soon when more stuff arrives.



This post has been edited by KiriKaniathran: Mar 6 2016, 11:16 AM
TSKiriKaniathran
post Feb 29 2016, 09:09 AM

Getting Started
**
Junior Member
80 posts

Joined: Dec 2014
From: Kuala Lumpur, Malaysia



updating log with AMD Fury X x2 with Aquacomputer Kryographics later today.
karthyhu
post Feb 29 2016, 09:33 AM

Regular
******
Senior Member
1,165 posts

Joined: Jul 2007
From: Johor



is it me or the pic in here doesnt load?
goldfries
post Feb 29 2016, 01:56 PM

40K Club
Group Icon
Forum Admin
44,409 posts

Joined: Jan 2003




Pics are all loaded from where I'm viewing.
TSKiriKaniathran
post Feb 29 2016, 08:09 PM

Getting Started
**
Junior Member
80 posts

Joined: Dec 2014
From: Kuala Lumpur, Malaysia



QUOTE(karthyhu @ Feb 29 2016, 09:33 AM)
is it me or the pic in here doesnt load?
*
Hi,
try refreshing, does it load? Inform us if it isn't loading, we'll try to host the pictures on another site. biggrin.gif
karthyhu
post Feb 29 2016, 08:33 PM

Regular
******
Senior Member
1,165 posts

Joined: Jul 2007
From: Johor



QUOTE(KiriKaniathran @ Feb 29 2016, 08:09 PM)
Hi,
try refreshing, does it load? Inform us if it isn't loading, we'll try to host the pictures on another site. biggrin.gif
*
at home it loads haha probably office firewall block that site
TSKiriKaniathran
post Feb 29 2016, 11:45 PM

Getting Started
**
Junior Member
80 posts

Joined: Dec 2014
From: Kuala Lumpur, Malaysia



QUOTE(karthyhu @ Feb 29 2016, 08:33 PM)
at home it loads haha probably office firewall block that site
*
Sounds good, thanks for viewing karthyhu smile.gif

TSKiriKaniathran
post Mar 3 2016, 11:49 AM

Getting Started
**
Junior Member
80 posts

Joined: Dec 2014
From: Kuala Lumpur, Malaysia





user posted image

Sapphire R9 Fury X's in the house! Pairing them with Aquacomputer waterblocks shortly.

user posted image

shh... bequiet...
Sexiest fans on Earth, made in Germany.
Perfect when paired with the Aquacomputer radiators, high airflow and silent as ever.

user posted image

Closer look at those blades - installing them onto the Aquacomputer radiators shortly




This post has been edited by KiriKaniathran: Mar 6 2016, 11:18 AM
TSKiriKaniathran
post Mar 5 2016, 10:10 PM

Getting Started
**
Junior Member
80 posts

Joined: Dec 2014
From: Kuala Lumpur, Malaysia





user posted image

Aquacomputer R9 Fury X blocks, nickel acrylic. Looks good and sexy as always but we're going to make it match our build better.

user posted image

Love the Aquacomputer Airplex radiators, the side brackets can be easily removed by removing a few screws. This thing is really modular.
Make sure not to lose your 'O' rings though.

user posted image

Spraying them matte black to fit the color of the STH 10.

user posted image
user posted image

Aquacomputer Kryographics blocks in matte black! Looks really good and would definitely fit the theme of the build.

user posted image

BeQuiet fan wires sleeved with Revoluzion Technologia PET Sleevings and Double Wall Heatshrinks. Firm and wouldn't come off after several tries by my colleague.
We would definitely recommend them anytime.
All 17 fans in this build will be sleeved smile.gif - ggwp

Since Aquacomputer doesn't have a backplate for the R9 Fury X yet(or maybe never), we decided to go with custom laser cutting an acrylic backplate.
Will post pictures of it in the next update.

Thanks for viewing again guys, will update as soon as the last batch of items arrive.
Next update should show how the build will come together as parts are all fitted into its place in the casing.



This post has been edited by KiriKaniathran: Mar 6 2016, 11:22 AM
TSKiriKaniathran
post Mar 6 2016, 11:29 AM

Getting Started
**
Junior Member
80 posts

Joined: Dec 2014
From: Kuala Lumpur, Malaysia



updated with resized pictures for a better viewing experience. Sorry for the large resolution previously guys.
derthvadar
post Mar 8 2016, 05:03 PM

(ง •̀_•́)ง
******
Senior Member
1,690 posts

Joined: Feb 2016
From: Bikini Bottom
drool.gif drool.gif

Keep updating !

2 Pages  1 2 >Top
 

Change to:
| Lo-Fi Version
0.0185sec    0.11    5 queries    GZIP Disabled
Time is now: 29th March 2024 - 06:08 AM