draw the 4 holes on paper accurately, then paste the paper on the wall. drill through paper. win liao lor

rotary hammer is not a good option for drilling tiny hole. Better use regular drill, turn off hammer action mode if possible

This post has been edited by yattnana: Feb 3 2016, 12:08 AM

For better accuracy use a small bit (4mm) first.......use the correct bit size on second run

Use a self-piloting bit and set to lowest rpm.

And a firm grip helps too.

condo has weak walls, cant compare.

Masking tape to mark where you want everything accurately, then start for the smallest bits and then move up to the size you need.

Usually I don't recommend using a pin punch on walls due to the possibility of flaking paint.

use drill tiles punya drillz head drill a bit 1st

i think u buy pull up bar ,

i also ,

my father use spanar hole as washer to beat the circle foreskin , slowly by slowly.


only can go in ,

i make alot of holes , but failed ,

i as a beginner of drilling ,

my father very tarik harga , and like sindir people ,

finally have to ask him to do ,

i would have call the welder do if not my house full of pets ,

4 hole each side , both side 8 total ,

my father managed 7 of 8 holes , while i manage none ,

ask the welder do is more worth , i dont know wasted how many wall plug...........................

This post has been edited by DSEcomp: Feb 3 2016, 12:24 AM

why i ,

no understand , what you talk ?

Very good question

im also see other people drill look like very easy one..

but when DIY,so sweaty + the soound so loud(scare the neighbour will shout out at me) + then drill drilll drill but the length not deep enough
1st time im drill a wall using my friend drill,afraid his driller broke becoz of me

water level, L ruler, plumb bob is the tools that u gonna need

drill slowly, once u entered ard 0.5 cm, can accelerate

This post has been edited by kurangak: Feb 3 2016, 12:30 AM

First you knock down the wall.

Then you hold the bracket mounting. Hold it in position.

Once you done that, you ask the Indon to start laying the bricks, apply the cement and wait for it to dry.
NOTE: Don't let go of the bracket. Very important.

And thennnn, ask him to plaster. Ask him to be careful. Don't plaster over the bracket.


Deyyyy... if the hole is big, you start with a smaller drill bit first la... you straight away use the big drill bit confirm you will miss the mark. Sometimes I use up to 3 drill bits to make it precise.

i heard last time ppl use human skull from a very stupid human in construction so that the final product can last longer, i need your skull, so i that the wall plan you describe can last longer.

Drill hole in the wall so hard to do meh?
Anyway the good suggestion is using masking tape.

To drill 4 holes for a shelf, start by drilling 1 hole.
Position the shelf and screw about 80% of the way.
Mark another hole on the masking tape and drill.
Insert wallplug and screw.
The last 2 holes are easy. No need to mark, just drill away.

Kasi photostat the thing u wan to hold on to the wall. The tape it on the wall. Drill on the exact location.

Woooohhhh k.

Will I die??

This wan. Tile drill head won't move about, use it to make a small hole, then tukar drill bit to the normal one.

jibby say you wont.

I think it is impossible to make it super accurate unless you drill it through the mounting holes.

i was thinking bout this too, drill the 1st hole, mount it tight, then from the bracket hole, start drilling, but will damage the drill bit and make even more noise as the bit hit the metal instead of just the wall.