possible, its apply the same to selling off ur honda insight and transfer the warranty to new owner provided the part still not void the warranty. Imagine if u want to sell off ur honda insight after driving down the road for 2 years redi, if transfer of ownership for warranty is no allowed, imagine the 5 years warranty on the IMO battery is void, then ur hybrid price will slashed to 40% left value. But Auction unit confirmed NO!

im from construction line, i can check for you with a service fee. offer me and location. I got the tools to check. Service = Preliminary check + After rectification check

depends, if those are hair line crack at wall or structural, those are merely plastering cracking. Structural crack only applicable to slab, beam and column area which the crack width should more than 2mm. Normally we can use special chemical to grout it back.

If developer failed to rectified and closed your defect forms within stipulated time, you can ask your renovation contractor for quotation, then send the quotation with notification to start work to developer, architect and SPA lawyer. If the developer did not reply, then you can rectify your own and claim the liability from the remaining 2.5% retention from SPA lawyer as stake. The Architect will not issue CMGD for developer if you do not satisfy with developer. Hence, of Architect can save you this round.

SP Setia, if you have the bullets. 24 + 12 months DLP, where to find?

People asking Question A and you are answering question B

Yes, under SPA standard clause, developer is allowed to hand over unit without the water and electricity supply. There are clause stated clearly that "hand over with tapping point ready for connection". Why this clause appear nowaday? Because developers always having issue with Syabas and TNB for supply and meters. These Authorities always delaying the demand. Its common.

Hence, most reputable developers will ensure all connection and meters and in place before VP. But some grade B or C developers will choose to hand over first to avoid potential LAD from purchasers even though without any meters are in place.

use thick paper to cover the floor trap.

bloating or bulging, no such thing called floating, we are not live in space

use thick paper board to cover on top the floor trap, then flood the floor with water. mark the water level. leave it there for 24 hours. next day check on slab below got any wetness, if got, wait for another 24 hours. Still persist, hack all and redo.

we treat it as upgrade package. No need to mentioned in SPA or revise it

No, you got conned. As a responsibility, they just cant void the whole electricity system just because you modify some points. What is they provide you China made cable? these cables need at least 1 year to harden then only problem appear. It is very common tactic use by sub con to cut cost. You should know what happen to copper price nowaday.

Oh please, TNB or Syabas wont come for internal inspection during CF. Only Majlis will come for inspection. but most of the time, they just look see and then kopi. you should know what happen afterwards

Nope, you can purchase from you majlis. Developer keeps whole set of their planning and construction plan for future reference.

PM-ed, thanks

Selangor, kuala langat district. sandwiched between jenjarom and banting

hi, its not advisable to folld the whole house, it will spoiled all the wall laters.

only toilet like upper floor, balcony and flat roof have water proofing.

But if your ground floor is marble finish or timber finish, then u need waterproofing

depends area.

no, they not allowed to drag the issue unattended. read your SPA, there are timeframe stipulated. from the date u lodge the defect, they still fail to attend, then write to SO and Developer that you will engage your own contractor to rectify. All cost will be deducted in stakeholder remaining money before DLP end.

nope, water will not disturb your wiring becoz all above 1 feet. but water will tends sip into your plastered brick wall, after your floor dry out, then the moisture trapped in your brick will evaporate out, causing your plastered painted wall to be blistering, flaking and mold.