thanks for the tip, will try it on my future build

Thanks for the info, bro.

Any idea how to tighten the action base 1?
Always have the problem where the gear that hold the joint seems to eat up immediately if I put a heavy gunpla on it

Do you have picture of how you pose the gunpla and where the problem happens.

I try to align the top joint to 90 but I guess the fa unicorn booster is way too heavy, eventually it move backward
Happen to sazabi too which is quite heavy as well

No choice but to have the booster touch the ground for extra support

This post has been edited by TheEvilMan: Feb 14 2016, 07:45 PM

That's how it is. Even RE Nightingale is heavy to pose on a action base.

well not too bad at least can do ascending pose


Attached thumbnail(s)

Not gunpla but can still be considered mecha.
A commission job i did for a friend. Had some problems but he said it was ok.



Next i'll work on the Beginning Gundam, a commission by another friend.
He wants it black and red.

hi want to ask u about this ver ka FA univorn, all those decals u used are dry transfer? or those are original stickers or water slides. thinking to get one of this but if all decals are stickers then will probably skip this.

Most of the red marking are stickers, while the white are dry transfer
u may get the water slide like what i did with the Unicorn Ova
in fact i recommend to get water slide, the dry transfer can be too tedious as it involve extremely small tiny markings which make the positioning difficult.

kinda regret for not getting the water slide and end up with lots of damage and ugly dry transfer

imo the stickers is fine as it's not very visible to white surface, i apply extra few coats to reduce the possibility of yellowing but not sure how long will it last tho

btw astray lover, u gonna get this don't u?


This post has been edited by TheEvilMan: Feb 15 2016, 05:35 PM

Hi.. Can i ask that is there any place in penang are selling customized water decal or any original or pirated water decal?? I am sick with all those normal sticker... =.=

This post has been edited by Edwardgao: Feb 15 2016, 05:43 PM

I am looking for a while in kl but hard to find too
I ordered some of mine from seller here and also Gundam.my

Ok thanks.. You mean the seller from here is from KL??

Seller from kl but not many choices, I order via poslaju

Is rg wing ew on sale already?

Yup .
Finished building mine last weekend

As usual awesome RG experience.

Valkyrie frame, developed at the same era with Gundam frame
later reuse and improved as Graze type frame



from wiki: "Its name and model number references Richard Wagner's Die Walküre. Specifically, Grimgerde is the 8th out of 9 Valkyries that appear in the opera. Thus, there is fan speculation that there are 9 mobile suits using the Valkyrie frame"

In another word, Grimgerde is an ancient mobile suit like Barbatos,Gusion and Kimaris

This post has been edited by nazrul90: Feb 16 2016, 10:25 PM

Following that logic, does it mean there are 72 Gundams?

I always feel like this mecha is familiar..

Full armor form

Its already confirmed that Gundam frame type has 72 total.
The Barbatos serial number is ASW-G-08 which is 8th Gundam frame, Gusion is 11th while Kimaris is 66th