Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

 Problem with temperature? Seek consultation here, DO NOT OPEN NEW THREAD

views
     
campsol2k
post Dec 20 2007, 04:11 AM

Newbie
******
Senior Member
1,214 posts

Joined: Oct 2006
From: Malaysia (Sarawak)
QUOTE(punkysue @ Dec 20 2007, 02:56 AM)
hallo all =D
i wan to ask rite..
if gpu(nvidia geforce 8600) temperature 63 C average ma?? cuz when i open casing touch like burning hot..
i use pc wizard 08

and.. is cpu temp at 47-51 C normal??

hehe sorry i ask so noob question.. cuz.. i juz got new pc.. my old one.. nvr used to be tat.. hot~~ lol
*
Yes. the temperature of your cpu and gpu are normal.


QUOTE
I have a problem with my temperature but it could be the censor. It's a E6320 on P965-DS3. At 1599(266.5*6) my temperature reading- with Thermalright Ultra-120 Extreme with air condition turned on- utilising CoreTemp shows it idling at 24. Couldn't get an average load value yet. It's running on F12 BIOS.

I suspect it's giving an inaccurate reading therefore unable to allow me to OC without worries as my temps could be alot higher.


No. Your temperature is correct and accurate. Normal temperature of E6320 using stock cooler is around 30~35 degree idle.

Yours is using TR Ultra Ex. So the temperature should be below 30.

This post has been edited by campsol2k: Dec 20 2007, 04:17 AM
campsol2k
post Mar 4 2008, 10:50 PM

Newbie
******
Senior Member
1,214 posts

Joined: Oct 2006
From: Malaysia (Sarawak)
QUOTE(sparrowed @ Mar 4 2008, 09:52 AM)
I use artic silver 5 for quite sometime already (in previous rig), as the improvement isnt convincing (no difference at all with the white xxx brand thermal paste), i use back xxx brand.

well, budget rig + extra cooling vs better processor will be a long debate, but for me i believe it is just a personal preference, if my thermal problem just cant solve i'd just settle with a bit lower clock. But I just wanted to confirm is it normal for super small heatsink to perform like that?
*
imo, its not really normal to have temps like yours. my friend's e2160 temp is around 43 degree idle 50 degree during load using stock cooler as the temps reported by gigabyte easytuner. in your case, I dont know what was the cause of your problem... might be bad cpu stepping, bad case ventilation, improper mounting -insufficient pressure, inadequate cooling capacity- cpu cooler too small or fan spins too slow ... who knows? Consider lapping your heatsink should improve the temp i guess.

This post has been edited by campsol2k: Mar 4 2008, 11:03 PM
« Next Oldest · Cooling and Hard-modding · Next Newest »
 

Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0175sec    1.26    7 queries    GZIP Disabled
Time is now: 17th December 2025 - 11:24 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.