Yes, direct upload from  the webgui.

can i flash another Firmware for example Gargoyle or Openwrt or LEDE onto Xiaomi mi WiFi mini from Padavan ? it is saying failed flashing.
I am able to find a solution for setting up OpenVPN and Adblocking solution in Padavan.
Anyone here have an Idea ?

For those who wants the updated mi mini firmware: MI-MINI_3.4.3.9-099.cf494ea.trx
https://drive.google.com/open?id=0B2PJyILCA...cXFaaDJOMTE0bmM

Can you share Mi Router 3 firmware to update.

Hi, i just flashed your firmware onto my mini , but i see you have removed OpenVPN support ? only PPTP and L2TP are available.
Any reason ? If i want to flash another Firmware like Openwrt, Gargoyle or DDwrt, how do i proceed ?
Thanks in advance

Sorry, that firmware was not the full version.
Here is the full version: MI-MINI_3.4.3.9-099.cf494ea.FULL.trx
https://drive.google.com/open?id=0B2PJyILCA...MHN1bzlLd1BmUzg

Thanks,  but do you know how to flash gargoyle on top of Padavan?
Any help would be appreciated...

Have you try this?
https://bitbucket.org/padavan/rt-n56u/wiki/...reOpenvpnServer

Must generate and install the certificate first.

vlan taggings to get it to work with Unifi & Hypptv
1. now the router should be flashed with the the firmware, it should be accessible at 192.168.1.1 with username: admin and password: admin.
2. now we’re going to configure the basic internet and iptv (for unifi, if you’re using maxis broadband you need to adjust the vlan accordingly) .
3. Click Advanced Settings -> WAN
4. WAN Connection type PPPoE
5. Under PPP VPN client setting key in your unifi account username and password
6. Under Ports Isolation and VLAN Filtering
7. Choose IPTV STB Port: LAN2 (last LAN port counting from left to right)
9. VLAN CPU (Internet) VID 500
8. VLAN CPU IPTV VID 600
9. VLVAN LAN2 VID 600
10. it should look something like this https://i.imgur.com/Cxmstbg.png
11. click apply
12. now you should be able to access the internet and Hypptv.

FameWolf
I have the same issue, not sure why.

Anyway, just compiled my firmware and had issues with HyppTV having no signal. After reading some posts, it is due to Multicast Traffic settings. HyppTV works again after disable the setting below:

I am currently using XiaoMi Mi 3 Router. After flashing custom Padavan firmware and by following your steps, managed to get Unifi to work. Thanks!
And by following your steps, managed to get HyppTV working as well (resolved my 'No Signal' issue). Thanks a bunch! 

#!/bin/sh

### Custom user script
### Called after internal VPN client connected/disconnected to remote VPN server
### $1        - action (up/down)
### $IFNAME  - tunnel interface name (e.g. ppp5 or tun0)
### $IPLOCAL  - tunnel local IP address
### $IPREMOTE - tunnel remote IP address
### $DNS1    - peer DNS1
### $DNS2    - peer DNS2

# private LAN subnet behind a remote server (example)
peer_lan="192.168.2.0"
peer_msk="255.255.255.0"

### example: add static route to private LAN subnet behind a remote server

func_ipup()
{
#  route add -net $peer_lan netmask $peer_msk gw $IPREMOTE dev $IFNAME
    route add -net $peer_lan netmask $peer_msk gw $IPREMOTE dev $IFNAME
  return 0
}

func_ipdown()
{
#  route del -net $peer_lan netmask $peer_msk gw $IPREMOTE dev $IFNAME
    route del -net $peer_lan netmask $peer_msk gw $IPREMOTE dev $IFNAME
  return 0
}

logger -t vpnc-script "$IFNAME $1"

case "$1" in
up)
  func_ipup
  ;;
down)
  func_ipdown
  ;;
esac

For those who interested to upgrade to latest commits.

Note: At your own-risk. I compile this for my Xiaomi routers use.

Xiaomi Mini
MI-MINI_3.4.3.9-099_5aa2a75.trx
https://mega.nz/#!to4TFbLY!k3XCeOEs...cr4V65P21Pi0Vzg
Xiaomi Mi-3
MI-3_3.4.3.9-099_5aa2a75.trx
https://mega.nz/#!d1QVEZhD!bJAjTO7o...BCEHd1IimY_dy9I

Thanks for this. 

Can flash the above straight to Mi-3 from stock webGUI? Or have to flash developer firmware first?

Any later version you compiled already?