Jun 12 2017, 05:55 PM
QUOTE(I<3LYN @ Jan 6 2016, 08:02 PM)
vlan taggings to get it to work with Unifi & Hypptv
1. now the router should be flashed with the the firmware, it should be accessible at 192.168.1.1 with username: admin and password: admin.
2. now we’re going to configure the basic internet and iptv (for unifi, if you’re using maxis broadband you need to adjust the vlan accordingly) .
3. Click Advanced Settings -> WAN
4. WAN Connection type PPPoE
5. Under PPP VPN client setting key in your unifi account username and password
6. Under Ports Isolation and VLAN Filtering
7. Choose IPTV STB Port: LAN2 (last LAN port counting from left to right)
9. VLAN CPU (Internet) VID 500
8. VLAN CPU IPTV VID 600
9. VLVAN LAN2 VID 600
10. it should look something like this https://i.imgur.com/Cxmstbg.png
11. click apply
12. now you should be able to access the internet and Hypptv.
I am currently using XiaoMi Mi 3 Router. After flashing custom Padavan firmware and by following your steps, managed to get Unifi to work. Thanks!1. now the router should be flashed with the the firmware, it should be accessible at 192.168.1.1 with username: admin and password: admin.
2. now we’re going to configure the basic internet and iptv (for unifi, if you’re using maxis broadband you need to adjust the vlan accordingly) .
3. Click Advanced Settings -> WAN
4. WAN Connection type PPPoE
5. Under PPP VPN client setting key in your unifi account username and password
6. Under Ports Isolation and VLAN Filtering
7. Choose IPTV STB Port: LAN2 (last LAN port counting from left to right)
9. VLAN CPU (Internet) VID 500
8. VLAN CPU IPTV VID 600
9. VLVAN LAN2 VID 600
10. it should look something like this https://i.imgur.com/Cxmstbg.png
11. click apply
12. now you should be able to access the internet and Hypptv.
QUOTE(fli_guy84 @ Aug 3 2016, 10:58 PM)
FameWolf
I have the same issue, not sure why.
Anyway, just compiled my firmware and had issues with HyppTV having no signal. After reading some posts, it is due to Multicast Traffic settings. HyppTV works again after disable the setting below:
And by following your steps, managed to get HyppTV working as well (resolved my 'No Signal' issue). Thanks a bunch! I have the same issue, not sure why.
Anyway, just compiled my firmware and had issues with HyppTV having no signal. After reading some posts, it is due to Multicast Traffic settings. HyppTV works again after disable the setting below:
Quote
0.0304sec
0.23
7 queries
GZIP Disabled