My RX just jumped out of TC mode twice. POS.
What version is your D2? V3.0? Try it in TC mode at 500F. See how hot it is. At 600F in the RX its not hot - thats because its under firing.
As for the "Temp protect" issues, I cooled the atty in aircon room before setting the resistance in the RX. I read on Joyetech forum that Evic Mini users were cooling their attys in the fridge to overcome temp protect issues.


budakdegilz

I'm a fan of things that work. Not junk.
I've used Joyetech in the past. Owned 2 of the original Joyetech Evic. Lots of functions but underfiring. Wismec has to fix all the issues in the RX200 for it to be a good mod.

This post has been edited by JimL: Dec 23 2015, 12:15 AM

I was fully on Kanthal. I bought the RX to play with for a while, then sell it. That why I tested all the modes in it. Can't sell it if its not fully functioning.

The D2 V2.0 had issues with TC as well. If resistance was set at normal room temp then you go to a cold room, you'd get a burnt taste the first puff or two till it warmed up. It was also under firing. The V3.0 fixed it.
Even then the D2 V2.0 functions better than my RX.

Problem with RX calibration. It hits "Temp Protect" and stops firing. Sometimes instantly when you fire it. So I cool the atty below room temperature then lock the resistance in.

You must be fcking kidding when you say you'll take Joyetech with a flaw? You own an RX200? You know what the flaw is?
You can't vape when it cuts off after a second and goes to "temp protect". I'm not the only one having this problem. So you can't say its just my mod.

I've owned every version of the D2. Every one works. None jumped out of TC mode unlike Joyetechs.

You're making it seem that Wismec & Joyetech are different companies. FYI - Joyetech is said to be the owner of Wismec.

OBS Crius. I have almost every UD tank. I prefer the Crius. Even better if you're a beginner because the Crius is extremely user friendly.

I have the Bellus as well. The Crius has more airflow. Easier to refill. Amazing flavor. Easy to wick - just stuff cotton into the slots. Has juice flow control. Turn off and it won't leak at all. Just put in a coil - as sloppy as you like, it'll still perform great. Buy it with no regrets.

Lol! You're a real big time happytetek fanboy. Why don't you ask Vail how much "FUN" he's having with his RX200. So are you saying that Vail and me both got lemon units? What about the other people that also have problems with their RX? Also lemon unit? Maybe Joyetech exclusively make lemon units!

Lose the fanboism lah. Call crap for what it is.
A mod can have every damn feature but if it doesn't work, whats the use? And don't believe everything a Youtube reviewer tells you. Test it for yourself. If every girls tells you she's a virgin are you gonna believe it? Lol!

I had a dry hit last night. Very surprised. Pulled the topcap off my RDA and fired it - the cotton burst into flames. I removed the cotton and fired it - screen said "Temp Protection" but my coil glowed red.

I like the Jay Bo design but the current 'Happytetek' chip is crap. Too rushed into production when they ran out of Evolv chips. I will sell my unit. Maybe buy again later when everything is fixed.

Why sell at low price when I can sell at higher price to noob Joyetech/Wismec/Happytetek fanbois?
Hell, I'll order batts from joenida to include in. Dem Joyetech/Wismec/Happytetek fanbois will be happier than a paedophile in a kindergarten! Lolol!

Yo firestonez long time no see. How you doing? What new toys have you bought lately?

GeekVape Griffin RTA. Crius on steroids. Somebody here told Joenida to stock it already.
http://www.geekvape.com/project/griffin-2/

I just ordered a Haze tank to play with. Haven't received it yet. The Pico looks cute but airflow is going to be restrictive.

Vaping at low wattage is for pussies! Clouds bro clouds.

At 200W the cotton burst into flames almost instantly. Don't even know how people get the cotton wet enough to vape at 200W.

You tested yours?

This post has been edited by JimL: Dec 24 2015, 12:59 AM

Whenever I get a mod, I'd test everything and push it to the max. How come you don't do that?
Hands not itchy meh?

This post has been edited by JimL: Dec 24 2015, 01:22 AM

Already tested firing it at 200W. But if I had wanted to try vaping it at 200W, I'd build coils differently. Use an RDA with lots more air flow.

Did you get your Cricket already? Pos Malaysia just sent mine to Penang. Don't know when they'll deliver.

Is he bringing in the black one? I'd prefer black.

Whuffo?

You getting one? I don't want to be the first. LOL!

Strum the coils. If you have a ceramic tweezer, clamp the coil as you fire till it fires evenly. Fire it, stop firing then clamp the coil if you're using normal tweezer or pliers.
Look for Youtube videos on it.

The name's Jim.

The Indestructible is right up your alley. Can cloudsbro with it.
I like my Snapdragon but I'd prefer more airflow in it. So I'll get a bellcap for it and drill some holes in it. The airflow might be ok for you though. What I like about it? Real easy to use and it doesn't leak at all.

Why don't you try an Aeolus? Its the most favoured RDA for flavor among FT regulars.

http://i.imgur.com/2XOExoP.jpg?1


Have you tried the TC in your RX?

This post has been edited by JimL: Dec 25 2015, 05:29 PM

The four holes on the 2 posts came from the Velocity. Lots of atomizers already had 2 posts albeit with 2 holes in it.

The Griffin is based on the Crius. But with a larger deck and more airflow. They should have also copied the 2 in 1 airflow/juiceflow control of the Crius. Would have made the tank shorter. Maybe GeekVape weren't thick skinned enough to copy that. Lol.

Hows the build quality of the Griffin? The QC on the Crius is not good - lots had cracked insulators including mine.
What watts are you firing the Griffin at? With a smaller deck/chamber I get a good vape at 30W in the Crius.
I'll probably wait for the black Griffin.