The posts in the Snapdragon can be changed to ones with vertical slits. I switched mine. Its included.

Exactly why I asked!!

You don't appreciate your D2 enough. Go compare TC with your D2 and RX. Then you'll appreciate your D2 a LOT more!!

Wow, RM45 for Clapton wire is Penang "price gouging to the max" vape shop price! UD clapton? Got mine for around USD5 for 15ft. from China site. You can try Hyper Vape for UD wires - prices reasonable. Or ask Vail.

How many watts do you need to fire at to get a good vape? With clapton wires, above 60W?

If you're gonna stock up, may as well order everything from Fasttech. Stainless steel wires, Kanthal, Clapton in various gauges.
For Clapton wires, don't use a coiler. Just coil by hand - easy to get it tight.
No dry hits? Hows juice consumption? Lol!

kuli2sahaja
Cheapos like me don't wanna pay for shipping from Lightning Vapes! Lol

This post has been edited by JimL: Dec 26 2015, 12:21 AM

Aren't you already using 24 gauge? Just how fat a wire do you wanna make? Twisted 316 will lower the resistance of the wire. 316 + Nichrome twisted and the wire will remain the resistance of the 316. Is this what you're asking?

* Fixed. Lolol

Regarding the popping sound - Try using more cotton. Actually popping sound is quite normal isn't it?
As for your "wet outside of the glass tank", isn't there an o-ring under the glass? Tighten everything.

Hahahahaha....... Joyetech/Wismec/Happytetek fanboi budakdegilz is going to say you got a 'lemon' unit!

You can fire it at 600F - its not even hot. Thats UNDERFIRING.
Try firing at 500F in your D2 - see how hot it is.

Totally can't vape when it hits Temp Protect right? Cos it stops firing after a second. Sometimes instantly.
The RX is wrongly calibrated. Its not for our local warm weather. Cool the RX & atty in an aircon room. Then when the mod & atty is really cool, lock in the resistance. - Thats one way to overcome the 'Temp Protect' issues.

The RX chip is utter shite when compared to a Yihi chip. If you set the resistance in the D2 while the mod & atty is still warm, the D2 will just fire hotter. It won't go to 'Temp Protect' and stop firing.

Well from what I've read in Joyetech forum, the Evic Mini has had its share of problems. From jumping out of TC mode to Temp Protect issues as well.
My RX has jumped out of TC mode to power mode a number of times. Good thing I use 316L Stainless Steel wires for TC. Nickel and Titanium might have released toxic stuff if its fired in power mode.

But the biggest problem is the 'Temp Protect' issues. Hit the fire button - nothing happens. Shows 'Temp Protection' on the screen. Can't vape at all. Since I use 316L wire I switch it to power mode then.

Thinking of getting a Reuleaux DNA instead.

This post has been edited by JimL: Dec 28 2015, 06:55 AM

Lolol! RX not so gooding after all huh?

Four versions of D2. V2.0, V3.0, V3.0A & V3.4. Which one do you have?
I've bought all four. Only have the V3.0A & V3.4 left. The V3.0A is my favourite - its overfiring! Lol! Max I use it is 480F. Way too hot above that.

Hot as in the atty got hot. Vapor hot as well. I used a Goblin Mini that time. Not the most airflow. If you used an atty with more airflow then you can vape at higher temp.
But the RX is a joke. I have it at 600F to delay the temp protect kicking in. Vapor is not even hot.

You mentioned Poison Brew juice one time. How is it? Which one to get?
Gonna order batts from Alexng. I'll add the juice in my order.

There's a lot to fix. TCR settings isn't going to stop it going to 'Temp Protection'. How the hell did Joyetech screw it up so badly. Even the 'no name' China TC mods works!
My RX jumps out of TC mode almost daily. In TC mode, I've gotten dry hits. Pull off the topcap from my RDA to have a look. Press the fire button and the coil glowed, then cotton burst into flames.

Coil isn't supposed to glow in TC mode, right? Lol. Temp Protection is supposed to kick in before that.
Anyway, I remove the burnt cotton then hit the fire button again - temp protect kicked in! Go figure.

Btw, 600F in the RX only feels like 420F in a D2. In my RX, 500F and 600F feels almost the same.

Vail TristanX gnomemaster nekkidgramma

Still dare to buy a HappyTetek product?

https://www.fasttech.com/forums/vapers/t/19...ward-vaporflask

This post has been edited by JimL: Dec 28 2015, 09:27 PM

Why is the D2 disappointing? I'm happy with mine. Everything works for me. Good battery life as well.


And........you're happy with a mod that weighs twice as heavy as a Rulo!

You're letting the having to switch to TC mode to access step down bother you. Thats pretty silly. Why? - Cos
you're using TFV4, Bellus, Crown & RDAs. None of them will even give you a good vape at low wattage.

In TC mode, batt life was about two days for me. Plenty happy about that.

hallucinogen Maybe instead of buying 3 Griffins, you should have bought at least 1 Crius. Then you can compare it. Can't fit big ass fancy coils in it but with a small deck/chamber, you'll get great flavor from a normal coil. And you can use the Crius at a lower wattage.

This post has been edited by JimL: Dec 29 2015, 01:02 AM

Huh? I just checked. Its listed as sold out. And prices on everything has gone up.

You pulse for a bit before you vape - juice used.
Clapton wires - slow to cool down resulting in juice vaporized even after you release the fire button.

I did tell you to buy a Crius to compare against the Griffin.
Smaller deck/chamber = less power needed = less juice consumed.

This post has been edited by JimL: Dec 29 2015, 04:08 PM