Guys do u happen to come accross CM Aquagate RL-HUC-E8U1/E8U2 with LGA 775 ready? if so can u guys give me some review bout it,the price, and where i can get it.
Thanks a bunch.

can refer here for price

http://forum.lowyat.net/index.php?showtopic=331984

Already did. But they didnt have the CM Aquagate RL-HUC-E8U1/E8U2

I presume E8U1 means the small 8cm version right? Hurry up go to PC Fair. They haf special offer on it at only rm180.

I'm not sure about the 8cm version. Here is the link CM Aquagate its the same with ALC-U01 but its support LGA 775:)))

yep it's the 8cm version

Owh. sorry for being such a noob. erm... well i cant go to pc fair right now. but do you guys know where to get it at LYP?

Any reason why u're going for Aquagate 80MM?

Well its easy to install and its kinda neat ) other than that no particular reason.

I'd say that there's a lot of air cooling heatsink that can beat that watercooling set...

Get an air cooling heatsink la, better...

No hassle like using watercooling liao...

oh come on i still need to know whether LYP has this set or not. Well i've used heatsink all the time and now i want to try wc

No harm trying. You can always drop by and check out ALL IT. They have those watercooling sets for CM there.. usually no one buying.

My decent piece of advice. CM WC kit? Don't bother seriously and not because I hate WC cos everyone who's been here long enough knows I'm one freaking WC nut. For the price your paying for that kit, it's better you stick with aircooling units. Want to go WC? Get a decent DIY set if you really want to

See TS, just read those two post up there, even both of them don't agree in that CM watercooling setup...
About what enigmatic says, yes, it seems like those CM watercooling sets that is in LYP, it seems like it's been there for a very long time...

No one's buying it...

And just read what our VIP member said there, it's just a piece of crap, just a little, i repeat, just a little better than those sucky sucky Thermaltake Bigwater Watercooling sets...

Don't go for CM WC la, if you're really into WC, ask metalzone about it...

if DIY, which manufacture brand would u suggest? and where to get? any available complete kit that u considered good enough?

ah i see. so which brand and model u suggest for a first timer in water cooling?

Ask the god of watercooling in LYN - metalzone

http://forum.lowyat.net/index.php?showuser=3860

Ok thanks sHawTY

But all three of u never try the unit before right?

I have tried the 120mm version bcos i bought it at a cheap price. I have to say it worths the price i paid...but if i were to buy it at RM250+, maybe it doesnt worth as much.
No, it doesnt match the real w/c kit, but u can't get a real w/c kit at that price anyways. It's priced in between of highend HSF and lowend w/c kit.

Hope this info can guide the threadstarter.

This post has been edited by davidletterboyz: Dec 5 2006, 11:58 AM

yes. thanks for your info davidletterboyz.

I've used the 120MM version before, and the performance are just a lil' bit better compared to Bigwater SE...

Used it for only a month, not satisfied with it, sold it my friend, then using XP120 with vantec spectrum 120MM UVled fan which performs just a lil' bit better and more hassle free compared WC...

if there is a leak on ur WC, can claim warranty for other parts affected? i mean can it be claim from the WC Manufacturer? cause the warranty for the mobo for surely will be voided, rite?

This post has been edited by E-J@1: Dec 5 2006, 01:55 PM

No, u can't claim the other parts that got faulty because the WC leaking from the WC manufacturer...

The warranty for the mobo?
It depend on how "faulty" the board is...

If there is a burn mark, then, just say bye bye liao...

don't understand starting from the 2nd statement
what do u mean by burn mark? does it cause by the leaking???

This post has been edited by E-J@1: Dec 5 2006, 02:02 PM

If some water dropped on the motheboard, there's a possibility that it'll produce some short circuit, then, you'll get you'reself a burned mark on the motherboard...

It depend on you're luck la...

If there's no burned mark and no water droplet can be seen on the motherboard, then you can still claim the manufacturing warranty from the motherboard manufacturer...

The thing is, if you're afraid of WC leaking, then don't go for WC it's just that simple

wwwwwoooooo, camtu.....
what a risk! sayonara WC

yeah me tooo. after reading you post and metalzone pm i think im going to stick with heatsink.

Hmm?
What did metalzone said to you?

Share it with us la...

been there, tested one and came away unsatisfied when a Thermalright XP120 pawned it left right and centre. I don't give advice blindly mind you

The same thing with what i've experience when i'm using that CM Aquagate 120MM...

Conclusion:

CM Aquagate sucks!!!

Don't even bother using it or buying it...

why dun try getting dis

http://www.coolermaster.com/index.php?LT=e...80%20%2F%20R120

hem currently using the 120mm aquagate

used it on my P D805 which is well known for
its heat

on full load @ 3.8ghz 1.5 vcore temp 46'

b4 dis used BTVX (sold to atak coz not satisfied wit the performance)

on full load @ 3.8ghz 1.5 vcore temp = 58'-60'

so to threadstater...dis is juz sum result that i get
using the aquagate 120mm
to me...spending oni rm230 (bought it from moderno)
is really a money worth spend

question is the servicabillity of it in the long run?

Well. he just say that dont go for wc just becoz its wc. and he said that i better stick with heatsink. and he also said that if i want a high end wc than i need to get a better one and assemble it myself.

oh ic. I will take back my words then.

But I did get good temps... so as mruzian. I dont know...maybe their quality havent been consistent?

Agreed!!
Maybe it's their quality being inconsistent...

However, i wouldn't trust that piece of watercooling, it's too simple...

Those swiftech watercooling products are true watercooling products too me...

Im also using CM WC kit Here. Ive got good performance with it. For me its really worth buying.

My 2600 TB is at 36 Idle and 46 Full load. Improvement with my current Heatsink Temp 50 Idle and 62C Full load. At least my room felt cooler since I dont use air conditioning.

And the best of all is its neatness. Since all the item is intergrated, therefore my casing look really tidy and neat.

Dude, what we've been discussing here is about those aquagate mini R80 & R120, not the big aquagate loh...

Don't compare that big aquagate with the aquagate mini liao...

Offcourse those big aquagate can pawn those aircooling heatsink, but we're here discussing about those mini aquagate that is pure loser to my XP120

This post has been edited by sHawTY: Jan 10 2007, 08:56 PM

man...wats all this hatred going on...we need some peace in the world.... (borak style) pause pasue..... not.... the cm aquagate mini 80cm is crap but the 120mm version is ok if u really want it or u have cash to burn. but other than that a nice hsf will kill pwn it.... i use to have a 1220mm version..performed admirably untill i started playing with the sexy heatpipes of TR .... but now i went back to wc , big time with swiftech stuffs.... neway if u really want it i can get it , performance is OK only.

Oh. Sorry for my ignorance. But I though the discussion here is about CM RL-HUC-E8U1/E8U2 refering for the first post. If its a mistake then my bad.

Erm.... can u give me the price for it and where did u get it. Thanks a lot.

Try asking moderno. I bought from him.

Basicly you dont have to worry about the compatibility issue since you can always bought other CPU waterblock eg Swiftech or DangerDen to accomodate your need.

owh ok thanks

bro u mean u want to attach dd or swify wb to the aquagate mini hosees? they will never fit man...too small..