Hi, driving a proton preve CFE for a couple years now.
Anyone got problem with their gear knob casing coming loose? Just the silver part i mean. Mine is effectively broken and hanging on

Every time i send to SC to fix, they just put double sided tape and put it back on which doesn't work. Anyone tried replacing their gear knob with the leather 1 from the Suprima S?

Haha did the same too with rubber band. I claimed before but came off after a while, so still the same. They just keep more double sided tape. sigh.
Looking around to switch the gearknob entirely.

hi guys, please recommend me a set of decent tyres for my preve. my stock tyres are basically done for, used for 4 years.
looking for a new set now

not yet set a budget, most probably around 300-400 per tyre. in Kuching, Sarawak btw, so prices might be more expensive here.

looking for something a bit better than stock ones.

Just changed a new set of tyres. Dunlop d05..
Anyone using these as well?

not really used that often, but alot of wear and tear due to construction near my area for few months.
about 50k km now

new tyres feel less noisy and more grip, but then again could be just me biased to new tyres LOL.
will update after a few more days use.
oh but its really quite stable in the rain though.

what tyres are you using? last time i use 'cut water' tyres for my old car, also got this problem

my airbag indicator light is always on. occasionally it goes off.. any fix? or sensor problem?

same problem here. some sponge stuck at the aircond vent too

my car also about 3 or 4 years.. headlamps keep burning out.
so just switch to HID now lol

proton preve cvt. i just switched out the bulbs with HID, no other modifications.
ask the accessory shop adjust the beam to aim more towards the road, instead of pointing straight up so not blinding.

oh i forgot. i think just some china brand HID, nothing fancy. already got rid of the box lol.. about rm300.

I usually turn off aircond before off the car.
Turn on aircond after a few seconds after a cold start, or turn on immediately during normal time.

Habit already

any recommendation for iridium plugs? my sc i usually go always no stock for spark plugs.
planning to buy myself and change

I am using CFE preve

need some advice
my proton preve recently can hear alot of vibrating noise from the dashboard when driving and accelerating. my car about 3+ yrs already.
is this normal? mounting point problem?
any idea how to fix?

how much to do the mounting at SC?

See what your budget leh. Double DIN pioneer 7" touchscreen

It's more like the plastic grey cap coming off. I had this issue few months into my preve. Just use some tape and pray it sticks.

Looking around for the Suprima S gearknob to switch it out

Throttle response lag happens in all proton car due to drive by wire throttle. Not the mechanical ones. So takes 0.5-1 sec to feel the car go after u step on the pedal.

Turbo usually u accelerate abt 2k o 2.5k u can hear the turbo spinning

This post has been edited by yokoloco: Jan 10 2017, 12:44 AM