Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Proton PrevĂ© V23, Livin la vida loca

views
     
kulatkia
post Nov 9 2015, 11:54 AM

New Member
*
Junior Member
48 posts

Joined: Feb 2010
Dear Sifu,
If I put at gear N or P. I just hard press the petrol paddle on max, what I noticed was the rpm meter just go up to max ~3.5. May I know is this just normal? Thx in advance. Btw I had nvr tried before during drive mode :-)
kulatkia
post Nov 9 2015, 05:15 PM

New Member
*
Junior Member
48 posts

Joined: Feb 2010
QUOTE(zgerm @ Nov 9 2015, 04:00 PM)
normal, because protect the gearbox
*
QUOTE(ChuanHong @ Nov 9 2015, 04:28 PM)
you want RPM go up to redline?  rclxms.gif

just to protect your engine and gearbox i guess.. you may test your top speed in somewhere very straight road.. see your RPM whether can over 3.5k rpm..
*
Thx all. Not really need the higher rpm reading. Just want to make sure this is normal and won't affected during necessary accelating while driving. Thx again :-)
kulatkia
post Nov 12 2015, 01:00 PM

New Member
*
Junior Member
48 posts

Joined: Feb 2010
QUOTE(ChuanHong @ Nov 9 2015, 05:59 PM)
normally 2k rpm around 90~100km/h.. 2.5k = 110km~120km.. after that should be 0.5k rpm to go up 10km/h.. seldom drive fast.. so not really know about that..

i drive 90~100km/h most of time just in rpm 2k where turbo just kick in..
*
I have no chance to keep at 90-100 as my daily route always having heavy jam... Petrol consumption is killing me anyway but I'm enjoying the ride :-)
kulatkia
post Jan 4 2016, 10:11 AM

New Member
*
Junior Member
48 posts

Joined: Feb 2010
Dear Sifu,
Great day to all. I was told the first 3 labour charge only FOC within a year counting from car regregister date. I didn't noticed this beforehand and my salesman didn't stated this alth during collecting car. Need advise from Sifu to clear my doubt. Thx a lot.
kulatkia
post Aug 8 2016, 02:22 PM

New Member
*
Junior Member
48 posts

Joined: Feb 2010
Dear Sifu,
A nerd preve owner is here for asking help. thx in advance notworthy.gif notworthy.gif notworthy.gif

My yr 2014 CFE model car battery is showing "Low" at meter indicator.
-Any suggestion for durable battery brand/model or ori proton is still the best tongue.gif ?
-Do I need to reset? reprogram? during battery exchange? Seriously my little small kancil just easy as plug and play only laugh.gif

Only left hand side of front windscreen wiper having serious shake/ vibrate during car idling while no significant in driving mode.
-May I know probably what is went wrong and will it still under warranty in this case?

The whole car feel swinging during cornering or pass bump area. Feeling not comfortable.
-May I know will this indicate my front and rear suspensions gone case already? Or others problem?

This post has been edited by kulatkia: Aug 8 2016, 02:23 PM
kulatkia
post Nov 16 2016, 09:57 PM

New Member
*
Junior Member
48 posts

Joined: Feb 2010
Dear all Previans,
Mind advise me which model of continental tyre is comfort and less produce noise. I'm planning to change my stock tyre soon. Thx
kulatkia
post Jul 7 2017, 03:46 PM

New Member
*
Junior Member
48 posts

Joined: Feb 2010
Dear all,
Need advice for my recent reverse sensor issue. It keep breezing when in reverse mode but there is nothing blocking at the back in fact. I tried wash but it seems doesn't help at all. Pls help and mine 's cfe version with stock setting. Billions thx in advance.
kulatkia
post Feb 4 2018, 01:17 AM

New Member
*
Junior Member
48 posts

Joined: Feb 2010
Hi all,
Anyone experienced a knocking sound when going over bumps around rear right hand side? It is so annoying and worrying me about something had went wrong but still failed to locate it. Pls help advise and thx in advance.
kulatkia
post Feb 4 2018, 03:21 PM

New Member
*
Junior Member
48 posts

Joined: Feb 2010
QUOTE(bongah @ Feb 4 2018, 09:20 AM)
did u get this sound when cornering? If so, its probably the driveshaft wears out
*
Thx. Not significant or none when cornering but very obviously while pass through bump. If speed higher then more obvious....
kulatkia
post Jan 20 2019, 09:53 PM

New Member
*
Junior Member
48 posts

Joined: Feb 2010
Hi all,
Just found out my preve tinted having bubbling, may I know for ecotint warranty claim, should I go to nearest proton SC or Econtont shop itself? Which one is the correct procedure? Thx.

 

Change to:
| Lo-Fi Version
0.1281sec    0.51    7 queries    GZIP Disabled
Time is now: 10th December 2025 - 06:16 PM