Thanx for the reply.

as per question 2, i can see that there is starter kit and there is also MOD setup made for Personalize Vapor. Is this distinguish by the power produce to form the volume of the cloud alone or there are other differences between the two?

ps: I saw the Battery in many shapes like box, pen, cigar, pipe and so. How different are those?

This post has been edited by Xander-G: Jun 30 2015, 11:33 AM

the production of cloud is pretty much determines by your setup - the coiling (sub-ohm to be exact for more vapor production) and also the tank/dripper. well, dripper tends to produce more cloud comparing to tanks if the setup is the same (am i correct about this? not really a cloud chaser lol )

but that's out of my budget. I would've gotten it at Le Vapor Damansara if it was within budget ahaha.

slowly bro. better to get 1 mod that you love, rather than buying a mod within your budget but it's not really what u hv in mind right? save up and mayb in let's say 2-3 mths then you can get a very nice mod sounds better,no? who knows, by the time you saved enuff, a better mod is launched and within your budget

You're technically correct. The best kind of correct. Setup > mod. Mod are just thingamajig to power your coils. More power, more spec, battery protection and etc. Vapor and flavour depends on your build

yea true that but im really interested in the vaporshark.

check online. locally online/b&m selling wire is ridiculously expensive. Doesnt matter if its nickel or kanthal, as long as its popular people want to make more money out of it. Then they will repackage it and name it kevin bacon wire and sell it with higher price tag.

then go buy lo

Hcigar will be carrying the DNA200 as well.

yeah, can't argue more external charger>charging port, but i still prefer usb charging because i hate carrying the charger. (it's because i always carrying powerbank )


i must be missed the evic-vt group buy. is the group buy for Eleaf Istick TC 70W happening now ?

This post has been edited by abec: Jun 30 2015, 12:22 PM

Now quite dilemma to buy zephyrus or lemo 2 for my 2nd tank..im using subox only for now..hmm..any opinion are most welcome

200w is a bit overkill imo. Well cloud chaser would disagree but DNA<Yihi on TC so it's a nice save there Evolve.

well its good for DNA fanboys. They all are like and
until evolv screws them with wrong chip design, (hopefully not). This time upgradeable firmware yo.

heard some monkeys going to cloud chase on nickel/tc mode


Good to see healthy competition between yihi-DNA. More goodies will come

may i know where can i get billow v2?

Hell yeah About time we have some friendly rivalry in the TC biz. Good news for us and bad news to our wallet
Been hearing a lot about these new builds that's popping up now. It uses both Ni200 and khantal or so the say. Riptrippers says so too in his DNA200 intro vid but he's a hypist moron. Take with a grain of salt on his word

nekkidgramma thats twisted build. i hate how soft nickel is. You screw it down and there it goes putus.

They use kanthal to strengthen the coil build. The electric will always flow in nickel instead of kanthal as ni200 has way lower resistance. so the tc still applies

ps: everything that sent to RIP tripper is good and the best in the world and good and did i say the best? lel

Currently I don't think anyone is bringing in the NextGen anymore. The supplier that brought it in only brought 24 units and all of them is sold. I know 3 of the 24 units sold.

So your best bet is fasttech for now.

I'm using it but I feel that if you're into creamy flavors, the NextGen is the tank to go. Even the K4 that I have cant bring out every note out of the juice as well as the NextGen.

If you're into clouds, this tank is not for you.

Pros:
Flavor. Full of flavors to the very last note for creamy juice.
Doesn't need maintenance for a very long time. I think I haven done anything to it for the past 1.5 months and it still taste amazing. I've heard that some people that hasn't recoil/rewick in 3 months.
Compact but 5ml of juice. It's only about 3/4 the size of a K4 but holds more juice than the K4.
Looks amazing when sitting on a 22mm base. Super minimalistic design
Doesn't require high wattage to bring the flavors out. I'm on a 0.8ohm build and I'm firing on 14.5w only.
No leakage. This beast does not leak at all.

Cons:
Coiling and wicking is a pain in the ass if you're not familiar with mesh coiling
Works best with 2 mesh. Preferably on #500 SS inner and #325 SS outer wick. Thus making it a little expensive for wicking materials.
Tight draw. I feel that it's even tighter than my K4 with minimum airflow setting.
Rare. Very hard to find and very little people knows how to handle this tank. But if you manage to master it, it's a bloody good vape.


Many people face leaking problems in the Lemo 2. The secret is the wicking. The cotton must be just enough. Also, when refilling, close the airflow and let the tank sleep on a flat surface. Only then you open the topfill and fill it about 80%. After filling, close the top fill and let the tank stand for about 30 seconds before opening the airflow. It shouldn't leak after that.


Evapeurate in Hartmas carries them. They carry the original UD aluminium stand with 510 treads. It's going for RM20 each and it's available in black.

This post has been edited by Siilver: Jun 30 2015, 01:39 PM

And I remember someone asking where to get the Cthulhu RBA a couple of days ago but I forgot to reply.

I'm letting go mine. Bought it during bulk orders by fauxfides.

Dual coil on a tank is not my thing.

Who interested PM me.

where can i get this juice? anyone know?

Don't think there will be shark or flask version as it only supports 3S LiPo battery. Well I do hope for a Flask version as I so need one in my collection. My IPV4 has been kick out of my collection once bumblebee arrive in the couple of days (fingers crossed)

Whenever u can't decide, get both. Hahaha... That's my theory so I can sleep at nite.