Bro a quick google brought up this side, perhaps you can diagnose the potential cause of your problem:
https://forvaping.com/ecig-equipment/tanks/...shooting-guide/

Here you go!
http://www.altsmo.com/mount-baker-vapor.html

This comes up often and i've personally got a few suggestions of tobacco flavors which worked well for those (cigarette converters) that have vaped them:

Vermillion River - Kentucky Premium Blend (Get it from Vapebrother or Altsmo online store)
Vermillion River - Kentucky Applewood Blend (Get it from Vapebrother or Altsmo online store)
Grumpy's Hooch (Vapebrothers) *new favourite since it's tobacco with a hint of coffee
Halo - Midnight Apple(?) (Many vendors have Halo products)
Halo - Torque 56 (Many vendors have Halo products)

This post has been edited by fauxfides: Jul 5 2015, 01:11 AM

Daiso (RM5 / correction: RM5.20 store) has all your needs for all vape sort things
Or you could head to a hardware shop and get a toolbox

OR you could head to jwraps.com for those fancy mod stands. Gotta put it out here for those collectors!

This post has been edited by fauxfides: Jul 5 2015, 02:13 PM

Prices listed is in USD. Also, if your're placing the order make sure to pay a little extra to avoid the "omg Fastech (FT) and their long delays / long wait etc". They are definitely cheaper than a lot of places.

Rather out of topic but your signature gets me everytime zzz

https://www.youtube.com/watch?v=k-CKg12T2qw

Now we know all IPV D2 comes with a silicone case. Pretty smart move on their side to avoid the paint chip off issue

Time to offer charged services

I know! when demand exceeds supply, price by right should be up to the person offering the services
Legit services that is ..... Coiling. I meant coiling guys.

What wires are you using to coil specifically? Is it Kanthal? If you're unsure go back to the person who offered you the wires in the first place.

www.steam-engine.org if your go to guide. Pluck in your wires, your inner diameter (ID) / the size of your screwdrivers, the designated resistance and it'll come up with the amount of wraps as well as the heat flux (meaning how warm it'll get).

Also if you're new I wouldn't recommend messing with Nickel wires but if you do, make sure it's spaced (as per suggested).
With all those aside though, I don't think M80 would be a suitable mod at all for an accurate TC function. Start with Kanthal builds, get used to it then proceed with TC coils

Right, totally missed the tank that was in question.

In other news, 1 USD = MYR3.83! Good thing I pulled the trigger on my FT purchase yesterday at RM3.79 ...
Oh MY (Malaysia), when can we stop the nonsense.

Hey man, when you dry fire does the coil glow from inside out? Pictures would help a lot. I suspect there's a hot leg meaning one side is glowing hotter/faster than the rest of the coil.

If i recall, that would probably be a month plus ago. It was hovering at 3.7X this past few weeks. Lowest was 3.75 I think. Not that it matters a lot if it's a small order but still

Cut the cotton slightly thicker than your ID (inner diameter) of your screwdriver, that way it wouldn't be too thick or thin if it's rolled just nice. Make sure it's not too tight or loose

Why oh why! hahaha no seriously, why though. I see you've still got some stuck to the bottom

This does not serve any purpose at all (well other than to attract attention) but gold plated tanks look nice. Going for about RM300+ per unit depending on the tanks I believe
https://www.facebook.com/norazizul.abdullah...206970718616165

Likewise! Pulled out on the DNA200 from Cloudmaker and opted for the Ares chip instead. Waiting for Vaporshark or HCigar for it

Cheeky fella aren't you! It doesn't matter what it is, if it performs it's as good as a spaceship

Not going to happen but I came across that flask with the sx350j as well. Very very interested. Waiting for it to arrive