Our Official Webside

[SIZE=7]AMT ELECTRONICS SS-20 - 3-CHANNEL TUBE GUITAR PREAMP



THE FEATURES OF SS-20:

- High-grade high-voltage feed of triodes.
- Complete elimination of operational amplifiers traditionally used in hybrid preamps for sound amplification and processing.
- Application of special semi-conductor amplifiers modeling triode-based harmonics and providing signal amplitude necessary for high-grade valve operation.

THE ARCHITECTURE OF SS-20:

- Ttwo high-grade channels CLEAN and DRIVE with the possibility of Drive-channel operation in two basic modes: moderate sensitivity (CRUNCH) and high sensitivity (LEAD).
- Effects Loop Send and Return.
- Operation via both direct unaltered signal for guitar amplifiers heads, combos, and speakers (OUTPUT jack) as well as speaker cabinet compensated output for mixing consoles, computers, or other recording devices.


RM1261.40






[SIZE=7]AMT SS-11A (CLASSIC) - 3-CHANNEL TUBE GUITAR PREAMP



FEATURES OF SS-11 DESIGN:

- Fully tube-based 4 - stage overdrive channel with DUAL TUBE design (2x12AX7 or 2x6Н2П-ЕВ tubes) with high-voltage anode voltage (+300 V).
- Three separate channels: CLEAN / OVERDRIVE / LEAD
- Individual gain sensitivity and output level controls for clean and crunch/lead channels.
- TREBLE SHIFT toggle switch to enter bright mode for that added punch of high end.
FX LOOP for external effects.
- OUTPUT jack for connecting to both specialized guitar amplifiers with a standard level of 0 dB (GUITAR AMP mode) and a CAB SIM MIXER out with a standard level of -10dB and a guitar cabinet simulation.
- The preamp outputs are equipped with sophisticated solid-state buffers.
- SS-11 incorporates new field-effect transistor-based guitar cabinet impulse response emulator prossessing. Improved naturalness of sound when connected to line input.
- Special attention was paid to transistors anode power quality: preamp uses a specially designed high-voltage transformer minimizing the penetration of impulse noises into amplified signal.

RM1643




[SIZE=7]AMT SS-11B (MODERN) - 3-CHANNEL TUBE GUITAR PREAMP



FEATURES OF SS-11 DESIGN:

- Fully tube-based 4 - stage overdrive channel with DUAL TUBE design (2x12AX7 or 2x6Н2П-ЕВ tubes) with high-voltage anode voltage (+300 V).
- Three separate channels: CLEAN / OVERDRIVE / LEAD
- Individual gain sensitivity and output level controls for clean and crunch/lead channels.
- TREBLE SHIFT toggle switch to enter bright mode for that added punch of high end.
FX LOOP for external effects.
- OUTPUT jack for connecting to both specialized guitar amplifiers with a standard level of 0 dB (GUITAR AMP mode) and a CAB SIM MIXER out with a standard level of -10dB and a guitar cabinet simulation.
- The preamp outputs are equipped with sophisticated solid-state buffers.
- SS-11 incorporates new field-effect transistor-based guitar cabinet impulse response emulator prossessing. Improved naturalness of sound when connected to line input.
- Special attention was paid to transistors anode power quality: preamp uses a specially designed high-voltage transformer minimizing the penetration of impulse noises into amplified signal.

RM1643