Any recommendation on the latest 2.1 speaker that is equivalent to Edifier M1380?
PC Audio Please Recommend... a 2.1 or 5.1 speaker set V6,, Comparison and Advice
PC Audio Please Recommend... a 2.1 or 5.1 speaker set V6,, Comparison and Advice
|
|
Aug 12 2020, 10:06 PM
Return to original view | IPv6 | Post
#1
|
![]() ![]() ![]() ![]()
Junior Member
516 posts Joined: Sep 2007 From: Ninth Mile |
Any recommendation on the latest 2.1 speaker that is equivalent to Edifier M1380?
|
|
|
|
|
|
Aug 13 2020, 09:14 AM
Return to original view | IPv6 | Post
#2
|
![]() ![]() ![]() ![]()
Junior Member
516 posts Joined: Sep 2007 From: Ninth Mile |
QUOTE(power911 @ Aug 12 2020, 11:11 PM) Same price equivalent? Don't think got any good ones out there. I was looking to replace my Edifier m1380 that recently emits static sound. Probably the closest will be XM6BT but thats expensive. I am also looking at logitech z337 but some said logitech speakers are crap.There's the XM2BT but don't think it's equivalent The XM2BT while still expensive might be the only choice unless there are other alternatives. My setup most likely to put the subwoofer under the table thus need something that could handle dust well or something that do not have too much switch so that I could just set it, wrap it with protective cover and forget it. |
|
|
Aug 17 2020, 01:10 PM
Return to original view | IPv6 | Post
#3
|
![]() ![]() ![]() ![]()
Junior Member
516 posts Joined: Sep 2007 From: Ninth Mile |
QUOTE(power911 @ Aug 13 2020, 10:19 AM) What's the static? Care to describe? Might as well try to fix it if you couldn't find something equivalent. I managed to do a cleanup on my speaker. I rub the socket contacts with isopropyl alcohol and remove the dust and grime. I also notice that the power socket where I plugged my speaker isn't holding well so I changed it.Does changing the RCA cable help? Usually the RCA cables do break from the bending Is the volume remote making scratchy sound? MR Diy sells contact cleaner spray and you can spray on the volume pot underneath the knob and spin it fast to remove oxidation. (It will also makes it lose grease and become too smooth) So far no static noise comes out. A friend did suggest that the static noise maybe due to power leak on the socket that I plugged my speaker with. |
|
|
Dec 17 2023, 10:23 PM
Return to original view | IPv6 | Post
#4
|
![]() ![]() ![]() ![]()
Junior Member
516 posts Joined: Sep 2007 From: Ninth Mile |
I am thinking of replacing my old Edifier M1380 with something similar but I am not very sure on which speakers nowadays that are similar or better. Any recommendations? Budget would probably under RM300.
|
| Change to: | 0.0175sec
0.63
7 queries
GZIP Disabled
Time is now: 11th December 2025 - 06:07 PM |