Got Css13skh inverter and Csv12rkh no inverter deluxe. No cold like my old york.
Also I think Panasonic reduce the max fan speed for their cool mode. The i auto or X it is equal to other brand maximum speed. My old York max is got better airflow than my new Panasonic. Also feeling colder faster.
just for experiment: try this:
open the front panel, see if the wind will be more stronger?
I don't know whether this is myth or not... but for me, my current electricity usage with 1x1.5hp inverter + 1x1hp inverter is almost same as 1x1hp non inverter! I use daily from 11pm to 7am.
probably will do a aircond relocation, non inverter, hose conceal. Possible to change to inverter type hose and use back the aircond? so it is ready for inverter in future.
Yes. This is true. We switch on during night and later got warm no cooling at all.
mine non inverter model, econavi mode will stop cooling for a long period and turn the room to warm room. always make me wake up in the middle of sleeping. Now do not use econavi mode anymore.
what's are the probably causes where at night aircond set at 25 used to be just enough cold and comfortable for sleeping, but recently 25C become warm and i have to lowered to 24C to get the same environment as previously?
I have washed the mesh filter, air cond age 1 year+, only on at night 11pm++ till 6am ++ a day
how often you do the filter cleaning? i found that filter cleaning alone is not quite enough. the blower needs to be cleaned as well... i didnt open up the casing, just used a tooth brush to brush off the dust. it helps a lot.
might consider to get those pressure spray bottle to clean the coil as well.
HI, my house going to be reno and I am thinking where should the aircond placement would be. Most probably won't install all aircond at once, but i would like the electric point and water outlet pipe ready for future.
Anyone has got a recommended contact to do installation? I bought my airconds from Lazada and my apartment unit already has the wiring, copper and drainage pipes - but the installers are adamant to charge me for all the piping and work even if I don't need them.
If anybody has someone, let me know
the price is standard, even the wiring, copper n pvc already available.
U meant not cold or chilled even with the lowest temperature setting?
Clear indicator that capacity of the ac unit is not suffice for the master room area. Time to upgrade to a higher hp unit.
Also the difference if height in between 7.5 feet and 10 feet shouldn't affect the room cooling if the capacity of the ac is sufficient since cold air travel downwards and hot air visa verse.
Personally installed a 2hp inverter unit for my master bedroom. No issues of heat even though the room is getting a lot of sun from noon to evening .
yeah just chilled, once cover blanket it will be warm n hot. the wind only can reach the far bed, near bed no wind. fan speed 2-3 (total 4 speed) thats y i suspect too high, near angle below no wind.
it have - strong airflow(as advertised) - having 5 star energy rating - having 12522 BTU
Anyone uses this model before or any other model recommendation?
Also, I would like to ask, the existing aircond point is too high, is it possible to lower it ? and by doing so, probably need to add the drainage pump, to pump the waste water back to the original pipe which on the above.
This post has been edited by IceBikers: Jan 18 2022, 12:27 AM
Noise like this? Not the same brand, but it was the noise that causes me sold off after a month and getting inverter aircond. Inverter aircond still have noise but it wasn't constant, it will turn down the compressor after 15-30 mins.
To be honest coming from older gen R22 ac, I found these newer gen R32 compressor are noisy, 2 different brands, inverter and non inverter (non inverter the worst).
just installed Mitsubishi MSY-JS13VF, had the same noise too.. and also fan speed from 2 and above will get noiser. Compressor changed but still have the noise and now moved the compressor to further location.
Currently using 1HP inverter aircond in master bedroom and its installed a lil bit high on the wall. The copper is conceal straight up to the roof and the drain pipe is conceal and located behind.(behind is toilet).
I plan to lowered the indoor unit in the room, at least 1-2 feet lowered.
Apr 6 2016, 06:09 PM
Quote
.
0.2961sec
0.80
7 queries
GZIP Disabled