I would go for Lemo 2 , better than the Subtank Mini in my opinion . Vapor production and flavor wise .

For thinner juice like 70PG/30VG or 50PG/50VG , i normally put a generous amount of cotton .

Thicker juice 60VG and above , i put lesser cotton .

Make sure not to block the juice channel 😁

Anyone know where to find silicon sleeve for SX Mini ? Around Subang Jaya

I need help , anyone knows how many wraps to get 0.06-0.10 ohm on a Lemo 2 with 28awg nickel wire ?

Meaning 26 gauge is possible ?

I normally coil my Subtank on a VS , 28 gauge 3mm 7 wraps will be around 0.15-0.17 .

Recently got a Lemo 2 and SX Mini , everyone seems to be coiling below 0.1 ohm . So thought of trying , haha .

Using nickel wire bro 😱

Is 26 awg hard to coil ? To space out the coils ?

Vape Empire . They have a lot of branches all around Malaysia . You can search them up and see if they have one near your area .

Their price is not too bad , good selection of mods and liquids as well . But most of them are locally made liquids . 😁

As long as your priority is right , you will not make a bad decision .

The pop sound is normal , it's the firing . Don't worry , it will not go kedaboom on your face . If there is anything that you are unsure of , ask the experts here . Haha .

Welcome !

Haha , is your question about sub-ohm ?

Sub ohm is basically when your resistance is below 1.0 ohm .

If you go sub ohm , you will have more vapor and maybe lesser flavor . If your resistance is above 1 then you will have less vapor but more flavor .

It depends on which tank/rda you are using .

Your setup is pretty good , you will learn slowly and upgrade if you wish . 😁

Tanks like Kayfun are more for the flavor , not the vapor .

Normally i will set my resistance around 1-1.2 ohm on a Kayfun 😁 Decent vapor but the flavor is good .

The most you can get with nickel is 0.2 😁

The looks of it will be the same but performance wise will be different i guess . The quality of the tank itself will be different .

Anyone knows where to find liquid brands like Phillip Rocke ? Any shop that brings in ?

I believe most of the B&M are out of stock .

Shops like VapeKulture , The Juice Machine , Le Vaporz and Vapers Union bring them in .

You can try your luck at Vapers Union because when i bought mine 3 days ago , they had only 4-5 units left

It's RM730

Vapers Union is in Zenith Corporate Park , behind Paradigm Mall . I think if you search Vapers Uniom you should be able to locate them .

I have both the VS and SX . Here is what i think about these two mods , my personal opinion that is .

VS - Easy to use , in terms of the interface and large display screen . DNA40 chip , the TC is very accurate . Build quality of the mod is fine , good enough . The firing on the VS is good enough as well .

SX - Much more functions on the SX Chip , especially the modes ( soft standard powerful ) . The firing is slightly better than VS . The build quality on the SX is really perfect . It's not that easy to use , but easy to learn .

My Lemo 2 has been fine for me , flavor wise it's better than Subtank IMO . No leaking issues as for now , need to properly know how to fill the tank itself . Other than that , it's a good tank .

Oh yes the eco mode ! Just wondering do i need the battery extension if i am firing at 120w ?

I suggest you to go a vape shop that is nearest to your location and check out the mods that you like . RM300-500 can get you a decent mod and tank plus batteries and charger . I would suggest Vape Empire for one of the reasonably priced shop .

Examples : IPV Mini 2 + Subtank Mini
Cloupor Mini + Subtank Mini