QUOTE(vinniexd @ Apr 28 2017, 07:43 PM)
Folks, just got my playstore back and disabled auto update.
Heres how to do it.
First thing first, you need :
1. A HyppTV STB (which is the firmware is updated, without playstore)
2. * A pendrive ( if the update fails, use the link below )
http://www.mediafire.com/file/ari766126bpju5v/update.zip ( insert this .zip file to * )
3. Remote ( to access the recovery mode )
Let's begin !
Step 1 : Turn the STB off and make sure there is no internet connection ( ethernet/wireless ).
Step 2 : Press the RED power button ( repeatedly ) while turning on your STB. If you do it right, recovery mode will pop up.
Step 3 : Enter the recovery code 304830, and wait the notification "Correct Password" to pop up.
Step 4 : Choose option (2) Update from backup and choose update.zip from your pendrive.
Step 5 : If you fail the STEP 4, choose option (3) Update from external storage and choose update.zip.
Step 6 : The recovery mode will begin and the STB will reboot itself.
[ Disable auto update ]
Step 7 : Go to SETTINGS
Step 8 : Select SYSTEM UPGRADE and enter 3008 in MAINTENANCE CODE and hit CONFIRM
Step 9 : Erase everything in SERVER ADDRESS and hit CONFIRM
Then, voila ! You just downgraded your STB's firmware and disabled auto update on your STB !
Enjoy your favourite apps like the good old days.
What can you run on the STB given the low specs of the machine itself? Will it be able to run FHD videos?First thing first, you need :
1. A HyppTV STB (which is the firmware is updated, without playstore)
2. * A pendrive ( if the update fails, use the link below )
http://www.mediafire.com/file/ari766126bpju5v/update.zip ( insert this .zip file to * )
3. Remote ( to access the recovery mode )
Let's begin !
Step 1 : Turn the STB off and make sure there is no internet connection ( ethernet/wireless ).
Step 2 : Press the RED power button ( repeatedly ) while turning on your STB. If you do it right, recovery mode will pop up.
Step 3 : Enter the recovery code 304830, and wait the notification "Correct Password" to pop up.
Step 4 : Choose option (2) Update from backup and choose update.zip from your pendrive.
Step 5 : If you fail the STEP 4, choose option (3) Update from external storage and choose update.zip.
Step 6 : The recovery mode will begin and the STB will reboot itself.
[ Disable auto update ]
Step 7 : Go to SETTINGS
Step 8 : Select SYSTEM UPGRADE and enter 3008 in MAINTENANCE CODE and hit CONFIRM
Step 9 : Erase everything in SERVER ADDRESS and hit CONFIRM
Then, voila ! You just downgraded your STB's firmware and disabled auto update on your STB !
Enjoy your favourite apps like the good old days.
Apr 30 2017, 06:41 PM

Quote
0.0403sec
0.46
7 queries
GZIP Disabled