good news , PC-A10 got those mounting wheels , i just checked there's four (two left; two right), and another for at rear...

but have to try mount it, since i just saw the holes, not testing the measurement...

@sniper69, did you try any slimmer type of fan?

If u don't OC much actually CM UV silent works just fine with the HR-01 ..

I noticed it whether running 500rpm or 1200rpm it doesn't make much difference probably around a degree of difference only.

Maybe u could just mount the Panaflo fan or get VIZO and reduce the speed ...

This cooler won't do make too much of difference with high CFM fan ...

sniper may be u should try attach 2 fan on the HR-01, perform much better for mine, but the weight side a bit problem though haha.....

btw as for ur HR-03, i suggest u still the fan blowing towards the rear, but u have to find a way to mount the fan, ur sound card is blocking the air intake of the fan

I do agree with you on this. My cousin's HR01 push-pull configuration performs better than a single push. His Opteron can go as low as 30c.

Anyway, pity you having so many clashes sniper69..LOL..You will have a hard time trying to find the best setup for those big HSF...

Yah that's the only solution coz the case is really a bit restrictive in term of airflow ...

Would the case being noisy with the fan at the front since U mostly won't put any anti vibration material on it ...

U still need the EX33 so that the front will haf a nice big intake. Now even with the fan there, the ROM slots r blocking any intake. The holes on the doors too small to b effective oso. With the EX33 u can open the door slightly during gaming sessions so that the EX33 can intake fresh air.

Bijak, bijak, tapi dengan buat camtu, ko telah menjatuhkan kecantikan your PC-A10 casing.

Potong ur ROM slots like what I did for the V1200 lar. Then nonid to buy EX33.

@sniper69,

Very good idea indeed but be prepared to clean your rig quite often due to dust..LOL..

I have some intentions to get a lian li casing. The casing is not anodised black but only silver brushed alu.

Does the aluminium oxidise? Will the aluminium casing fade?

When will Lian-Li starts a very special edition like just 5 units of one of their casing model that were built in gold?

The way i put mine on the PC-7 is :

Front - Intake
Rear - Exhaust
Top - Exhaust

Just waiting to get my hands on a Side Fan for Intake and mine will be done but too bad ATE ran out of stock. Anyway, with my following configuration without the side fan, does it seem fine?Cause both my exhaust fan are those crazy Silverstone fan that blows out alot of air while intake is only a Noctua which is half the performance of the Silverstone.

After taking out every piece of hardware and reinstall them back, my 8800 suddenly is idling on 63c instead of the usual 58c i get last time. Would configuring the Top Fan to intake helps?Would it be a problem having too many exhaust and only one intake?Cause AFAIK, i have 3 exhaust (rear, top, PSU) and one intake only..