Thank you
Wah, in one day can setup so many.
You really is a fast learner.
Can become the next HA sifu.
I can retire from this thread liao. Kthxbai.

For tv and speaker , connected to what device to make it smart or it can direct input to HA

Hmmm dont know about this, i have a chromecast also, will try

Thank thank

Ya im got GH also, so can set the setting ya

Sonoff T1 makeover with Temp Sensor. robert82 Here is shown the two ways to flash Tasmota into Sonoff T1 (applicable to our UK board)

what router are you using?
and how many devices connected to that router?

Online gaming? It takes a lot of bandwidth I believe. Some router can set priority on gaming packets.

The devices are on local LAN control. So, I think no other option than to have dual band router, that is if your PC support the 5 GHz. Then you will have separate band for gaming and your devices.

If you do not want to buy new router, then has to wire your PC through LAN. If you are thinking of powerline solution, you might as well buy new modem instead

Run on LAN and port fow.

Probably not the routers fault. I have about 37 devices on my tplink AC1200. No problems but I didn’t try iPad games. I do have a PS4 though

At this moment, you can do that provided you are using Home Assistant with your Xiaomi gateway and Sonoff switches.
Few members are planning to do that including robert82 and kelembai.
Not sure what is their progress but I am sure it can work.

Hello guys, I am considering the Mi smart home system but I think one gateway may not be enough to cover the required area:

1. I suppose we can have multiple gateways in one system right, but must these gateways be in the same wifi network? (my current wifi setup is different floor different wifi)

2. is getting zigbee repeater better option?

Ouch! A lot ah?
All 2 gang or 3 gang switches?

wow my plan is to by one aqara switch with neutral to test it out first with the AC switch, if it works then only i will buy more...

qns on aqara wireless switch, if i have an aqara wall switch in my master bedroom and i setup the wall switch (in master bedroom as well) connected to the wireless switch with a gateway, can i switch off/ remove the gateway and the wireless switch can still control the wall switch? thinking how to avoid buying additional gateway.

how do you know that the neutral on ac is not same phase as the normal switch? Did the power trip?

Care to elaborate on the "exploded" part? 
Planning to do the same test too...

Ok bro! Just bought aqara switches today during 1111. Hope it works, else gotta pull neutral wire.

Cheers.

you want smart switches that rocks back and forth (aka rockers) like your normal house switch?