This shop is cheaper:
https://shopee.com.my/Barrow-GJQM-01-Manual...4781.7267843011

I have a used unit, and you can have it for free but on a condition that you either come to my office in Subang Jaya or pay for courier charges

h11g you can also buy from the link below. He's a local seller

https://shopee.com.my/FreezeMOD-BYKSKI-B-DT...8724.7524019235

Now I'm in Klang, Subang Jaya only on weekdays

It's normal. That's why they are called "compression fittings"
Shouldn't have done that. You've weakened the structure of the tubing and elevate the risk of leakage

Wrong orientation of the pump cables (except the ARGB cable), should either be on the left side or at the bottom so it will be less messy

You can just drain the liquid into a bottle so you can reuse it again and at the same time fix the pump heatsink orientation

PS: What happens to the ARGB lights on the pump, distro & CPU waterblock? You didn't connect them?

That ARGB splitter is crap, it's better if you use this instead:
https://shopee.com.my/product/99616108/7911305855
http://www.idcooling.com/Product/detail/id...RGB%20Fan%20Hub

It's very useful. It's a hub for PWM & also ARGB, provides extra power for both the PWM fans & ARGB LEDs in your PC
I'm using it both in my gaming PC & home server

Reason why I'm using it because the ARGB connector on your motherboard can only support a limited number of LEDs, whereas that RGB hub from ID-Cooling can support almost unlimited number of RGB LEDs because of the extra power supplied by the SATA connector

I have a total of 21 RGB strips (10 x RGB bars, 7 x RGB fans, 2 x waterblocks, 1 pump & 1 distro plate) in my gaming PC and that original 3 PIN ARGB connector on the motherboard definitely won't support all of that LEDs
That hub also supports 8 PWM fans from a single PWM source
Whereas my home server has a total of 14 RGB strips (4 x RGB bars, 6 x RGB fans, 2 x waterblocks, 1 pump & 1 distro plate)

This post has been edited by sHawTY: Feb 28 2021, 10:21 PM

No probs
Also, you might want to invest on better fans. Those ID-Cooling fans sucks ass and the specifications is fake at most

You're better of with Arctic P12 PWM PST CO. Arctic P12 PWM PST CO is one of the best fans for radiators with it's price point.

P12 has 2 models, CO & Non-CO
CO - 2 ball bearings
Non-CO - Fluid dynamic bearings

Get the CO model. Only RM47 per unit from Taobao (including shipping)

No probs bro
By the way, why did you stick that hub behind the distro plate, can see the messy cables wor, put it somewhere else la

Mantap, nanti dah siap, show off bro. Including how it looks when you turn off your room lights so we can see the full effect of your RGB setup

This weekend I'm gonna complete my monsterous RGB rig with 21 ARGB parts as well, semua part dah sampai, tinggal nak pasang je. Hehehehe

Hahaha. Soon bro
Hopefully this weekend, I forgot 3 more ARGB bars that's still pending for delivery from AliExpress

Damn, with a current total of 15 ARGB stuff in my PC, it's already consuming 42 watts just for the ARGB, still got 3 more ARGB fan & 3 more ARGB strips to be installed pending delivery

ARGB turned off:


ARGB turned on:


This post has been edited by sHawTY: Mar 6 2021, 05:58 PM

I'm using Corsair RM1000i power supply with it's native Corsair Link software

After 21 ARGB stuff installed
I'm finally done. No more ARGB stuff to be added

ARGB turned off:


ARGB turned on:


64 Watts of ARGB

Will upload some pictures later, have to find a good camera first, my Pocophone F1 camera is not that great

This post has been edited by sHawTY: Mar 21 2021, 11:08 PM

Finally had the time to upload videos of all the ARGB's I've installed in my PC
Total: 21 ARGB stuff

8 x FREEZEMOD JXDT-5CX ARGB Bar (each bars have up to 39 LEDs depending on the size)
7 x Cooler Master MASTERFAN MF120 PRISMATIC
1 x BARROW LLO11-SDB XL Distro Plate
1 x Barrow SPB17-T PLUS pump
1 x Bykski A-RYZEN-TECH-V2-X CPU block
1 x Bykski N-RTX2080TI-X GPU block
1 x IMAGINARY LIGHTHOUSE-ATX rear motherboard ARGB Panel
1 x Lian Li O11D-XL light strip

That setup already fried 2 ID-Cooling HA-02 ARGB hub LOL
Too much LEDs to support

Nice rig bro, any photo in daylight so can see your liquid cooling setup?
By the way, is that 011XL?

Why'd you order PETG tubes from AliExpress?
Shopee is way cheaper & faster too