I like to ask existing Mazda owners- Is Bermaz service ok?  Is it up to satisfaction?

Depends on sc done is good and some is bad, if go to sc they didn't have a lot of people usually will get your car service within an hour for minor servicing

If you go for sc with good reputation then you should be safe

Safe? 

Is the SC on Federal Highway ok?  The one situated near Avon and Mercedes building?

I never use the foldable seat, not even once 

Anyway just my 2 cents as a Owner (not Salesman)

The nyek nyek sound, yes is annoying sadly there isnt a fix solution as of now. Been 2 years + since the launch of CBU and this problem still occur. Good thing is, Mazda is doing something i have changed the Lower arm bush twice (once a year, when i send for service) and usually after i changed, its perfectly fine only after a certain period you will notice the same issue again.

Maybe mine is CBU, as i found out from owners, CKD tend to happen less likely after changing their lower arm bush..

Other that this issue, so far i don't encounter any problem with my Mazda 3. Oh beside my Resale Value 

Anyway, Mazda is really a fun car to drive, if you're emo just volume up and drive around with your favourite song   

After awhile you will feel 

Hey guys, can share about pros and cons of mazda3? Any discount for now?

When can you buy GVC?
Mazda says G-Vectoring Control will first be available on the 2017 midsize Mazda 6 sedan and the compact Mazda 3. Mazda will outfit the entire line within “a couple years.” It’s not possible to retrofit current Mazdas. While it’s a software enhancement to the Mazda SkyActiv engine control module, there are also subtle tweaks to the suspension and steering. GVC will eventually be on all Mazdas, standard, and unlike the test cars, they’ll be always on (no off button).

An interesting possibility is what happens if other automakers want GVC to use on their cars. So far, Mazda hasn’t said if it would license GVC or a variant. There have been times in the past when one company had a technology everyone else wanted, such as Mitsubishi’s counter-rotating balancer shafts that reduced the vibration inherent in four-cylinder engines.

How's the RV for Mazda in generally? I know it's not T and H kind of RV. But is it as bad as say Kimchi or Proton? lol

Guys. It seemed GVC cannot be retrofit to current Mazda

http://www.extremetech.com/extreme/230819-...a-better-driver
Source
http://www.extremetech.com/extreme/230819-...a-better-driver

Why why why     

RV very very bad. Used car categories it as Volkswagen and Kia range

Really that bad?!   

If want RV, just buy Myvi or vios...no need to think so hard...

Not that I want great RV like Vios or Myvi...but just don't want bad RV as worse as Kimchi lol. Didn't know Mazda is that bad. Hmmmm....

Finally I’ve read all of u discussion from 2015 until the last post  2016 talk about the arc for Mazda Vehicle, so I just wanna know until today who already owned the old Ckd M3 and the latest facelift M3? Did the new facelift still come with the noisy sounds?

You should refer to this thread too, currently 122pages Happy reading.

Mazda 3 Owners