press the needle stick at the bottom center of ur speedometer until it shows ur car mileage (not the trip mileage)...
press and hold the needle stick until the clock blinks and adjust it by pressing the needle stick..
once u set the hour time, let off and wait until the minute time starts blinking and repeat the same..
after done, just leave it until it stops blinking.. then u r done....

How u wash cooling coil without dismantle ?
The cooling coil is behind dashboard..no way can wash without dismantle..no ppl will only wash the cooling coil of our saga because u need take out d dashboard..the labour u pay for that, might as well change new ccoil...

I just did for blm change ccoil, top up compressor oil, top up gas all in 800 incl. Labour....

For my flx, 70 only for top up oil and gas..

Outside...
Include new receiver drier ? Mine included...
If he really charge 600+ then is cheap..the drier cost <80 only..
So if all in 700 then is good price..
The + sign is dangerous. Because it is not NETT price..
Halfway doing, they may say this n that reason then they will say now no longer 600+...

This post has been edited by ruby1288: Mar 15 2015, 11:15 AM

Immo chip alignment got nothing to do with car cannot start la...
don't u guys know ur key can use both side ?
if alignment is an issue, then when ur immo chip is at top (when u use the other side of yr key), then the car mai cannot start ?
it doesn't matter where or how u put ur chip inside ur key case...

not to mention if u change ur ori keycase to other design, then how ?
takkan car cannot start...have to use back ORI keycase meh

This post has been edited by ruby1288: Mar 16 2015, 11:30 AM

berry long time I missing in action liaooo...
itchy hand, post 1 spam sin

1.6 flx cvt can pass 180...max. i reech 185 then no more straight road (from shah alam to batu tiga toll) liao..

Tell me what is this ??


and this



and this ?



65,000 km / 3 years
mind you, all 3 pcs tyre is in the same shape..
the 4th is new tyre coz few months after get car then kena paku..

This post has been edited by ruby1288: Apr 19 2015, 05:17 PM

sudah lo tapi bukan RE003.

iska pls help to gagacyclopedia the bearing price for FLX...I think mine giving out also...

jsnkok what is your mileage now ?

davidke20 what do you think if the wheel bearing can fail prematurely considering the tyres are cracking all round the diameter ?
I have a funny noise now to the car..
from 60-80 kph, it seems like I can hear bearing kong noise...
from 90-100 kph above, seems like bearing kong noise is no longer audible...or engine / wind noise is too loud until it covered the sound ?

do we need to "pump" the bearing in for FLX ?
I know for BLM is required to bring to machine shop and pump in the bearing to fit in place..

baru aje change tyre...
same sound before and after change tyre...
this weekend need ask magician jack up car and let the wheel free run see how...
however i do suspect the bearing to go wonky prematurely...

walau, you din pei copylight charges

this is inside crack wo..urs inside or outside ?
when we took out the tyre, everybody was shocked..
literally the crack was like through and trough the whole tyre diameter...

car old d, then maybe motor not so powderful liao...
could be culprit...
iinm, denso one is 2xx

N3x3n
JambatanBatu Ecobia

Top up a bit, get
yokosama dvd2

Check relay under fusebox.
If OK then only check fan motor.

seems like my front right bearing is the culprit...
konar time, the right bearing scream like shyt...
need to check first...

yokosama dvd2

I changed a denso motor last year rm 220 (part only) for BLM.
add rm 10-20 for labour then can d...

[Includes Wheel Bearing] Wheel Hub Rear PW828292 534.45
davidke20

two zero one two