damage berapa? ayam going to get mine soon, so am thinking whether go straight to EVO or repair the current

That's fairly cheap

For MOST case, yes the wheel up is attached with the bearing. However, even for EBO/GSR, the hub can be separated from the bearing, but need machine press to force it out/in. Irresponsible workshop that doesn't have a machine will use a cylinder tube to place on top of the bearing, then use a hammer to knock on the cylinder tube to force it in, which may not guarantee the fitment and or whether the impact will harm the bearing.

For the underside kemek usually mudguard guy will drill a small hole then place a hook like metal rod and keep hantam pull out the kemek area then patch back the hole

okay, i found a ketuk shop at usj1 area, repair my problem for rm180 or less, include spray the whole panel till back wheel arch, not just affected area.
harap2 this uncle will do wonderful job for me. kamsiah for all ur inputs.

yang suruh pasang side skirt tu, memang i wanted, but repair cheaper compared to buy sideskirt, so repair dulu la. slay also quote cheapest side skirt siap paint is 200. haha

to me, reasonable repair than cover up use bodykit.
it's like you got wound but only cover up use bandage. use bodykit but inside of you still gonna hurt cause you know the damage is still there.

i'm still not fond of woof woof calculation methods since long long time ago anyway lol.

Sent my car 1pm, collected back at 5pm.
end product picture 


For those who want me intro them this shop, here is the contact:

The Tops Auto Centre
Mr. Kew Fook Hau
0122926199
Lot 754/14, Jalan Subang 3, Subang Jaya Light Industrial Estate, 47510 SJ